Search results

I went to the shop today and took both lines with me. I talked with the fella and male end was 1/4 body and had the "old" JD end on it with a o-ring. Since the lines were 6' too long as it was, we went ahead and cut them and put new ends on with a adapter to 1/2. Came home and put them back on...

The tractor side/ female rear remote is 1/2, it read pioneer 4250. The male end on the hydraulic line appears to be 1/4 body-0.56 ISO5675. I know my terminolgy is off as I'm new to hydraulics so bear with me. Sportsman762, I believe that would work if I replaced the lines but I'll just get...

I agree on over thinking it lol. I went to 2 TSC's and a RK, they were all out of the adapters. I couldn't find my mics (still boxed up from a move) but I did take the hose with me to try at the store but that was pointless. I did thread on a 3/8's coupler on the male end and it fit but it...

No, I meant on the hydro line. I mean, why replace lines and not use a 1/2 male end. Especially if you have a new/newer tractor. Or is it because the implement is so old that the previous owner had no choice but to use a 1/4 line and I didn't see that he was using a adapter?

Thank you for the pic Midniteoyl

Thank you fellas for the help very much. I believe my female coupler is 1/2 after looking at the identification guide but I will have to measure the male end in the morning as I can't tell if its 3/8 or 1/2. I have a pair of mics and I'll also see if there are any markings on the male end. I...

So can the end of the line be replaced with a 3/8 to 1/2 or is there a quick coupler adapter 3/8 to 1/2? Or that would be a 1/4 to 1/2 per what the line sais. Also as far as measuring the line tip, is measured outside or the the inside where the bearing is?

First time messing with hydraulics so bear with me. The previous owner had a smaller cut, 20 series I believe and made the lines to fit his as he said they were new lines. I just measured the the tip of the line and it is 1/2", even sais so on the line. The coupler on my tractor measures 1" and...

I recently bought a JD 450 sickle bar mower that has hydraulics and I didn't pay attention when I brought it home to the lines. The male end is too small for my valve that is on my massey 231. I believe I've read or seen a video that stated their is an adapter and possibly that older JD...

I've been shopping the last 6 months for a sickle bar mower to use around my pond and outside of my field edges but mainly for the two day love affair of trimming around the pound. It is a tremendous chore to trim and maintain the pond, only an acre but man does it bite and I like it to look...

I'm looking at picking up a skid steer, 2018 or 2019 and have been watching dealer sites/craigslist etc. and was wondering what I can look to get off a used machine at a dealer. I know they have mark up and need to make some money but I'm looking for a ballpark %. Thanks Specifically looking at...

First time post but I've been reading for the last 6 months and watched every youtube video possible relating to options with subtle changes after everyone's ideas and similar questions. Have patience and bear with me through this journey, also help me spend some money lol. My property size is...