Search results

At our cabin where we deer hunt (south of Fredericksburg) we can barely get TV signal. Located in a valley with a fairly high hill between us and Austin and San Antonio direction. Not sure exactly where the transmitters are located. Using a standard fairly large antenna. An amplifier helps a...

Found this in my garden, hung up in my bird netting and already dead. Don't recall ever seeing one like this before.

OK, guys, tell me I am nuts. You may remember me posting a couple years ago about trying to find an old flat bed semi trailer to drop across a creek for a bridge to make it easier to get to the other side of my property. I found one that was exactly what I needed, 40 with good steel but rotted...

In June, one crawled out from under my foot while I was pulling some ground cover around my shrubs. In July, one was relaxing on my front porch one evening. Last night, I was pulling some of my dying garden plants and almost grabbed hold of one. (I'll be wearing gloves next time :eek: ) All were...

Saw in the paper yesterday where an 8 yr old girl died on a hay ride. She was riding on a wagon pulled by a tractor when she fell off and was run over by the wagon. I have read a number of posts on here over the years of some putting together a hay ride. Be careful. It could happen to anyone.

Needed to mow last weekend so backed my tractor up to the rotary cutter. Locked the brake pedal, killed the engine, and hooked up the RC. Got back on and started mowing. At an area that sloped down for 30-40 feet, I was backing down when I went to stop. NO BRAKES! :eek: Fortunately, at the...

Anyone planted buffalo grass in north TX? I have bermuda now. It does pretty well, but even it requires quite a bit of water in our hot dry summers to stay green. And last year's drought really hurt it. Looking for something that can survive better without a lot of watering. Have not yet been...

My little plot pales in comparison to what Jim did last year, but I do have my onions in the ground already. Also bought my other seeds. And feed and seed store said they would have tomato plants in by next week. Maybe a little early to chance that yet. Jinman, you going to keep us up on your...

The load center in my house is 200 amp but a relatively small number of slots for breakers. All were used when the house was wired 22 yrs ago. It is a Crouse Hinds box. I would like to change a couple of the full slot breakers to half slot breakers so that I can add one more 220 v breaker. I...

The last 2 yrs I have planted some pumpkins for the grandkids to pick for haloween. But limited success. Last yr I had 6 vines and only had 4 pumpkins. This yr I had 5 vines and only 1 pumpkin. The pumpkins I do get are nice size, just not many of them. Vines look great running out 20' or more...

Next year will mark 40 yrs of wedded bliss. (my wife loves when I put it like that :p ) For a special trip, we are thinking Alaska again. We went there a number of yrs ago and loved it. 2 nights in Fairbanks, 2 inside Denali NP, 3 in Anchorage. Rode the train from Fairbanks/Denali/Anchorage...

What Gary said.

When I log in to TBN, everything loads very fast. But after moving between different TBN forums and threads for a while, suddenly the load speed drops to VERY slow. I can leave TBN to other web sites for a while, come back, and everything is fast again. Or I can close my browser and reopen it...

I have a 950, next smaller to the 1050. The 1050 has a turbo diesel engine. They were made from 1980 to 1988. I did not think the 1050 came with hydro option. I am pretty sure they were all gear drive. All the x50 series JDs are good solid tractors. But it may also be a little large for only 2...

I know there are a lot of TBN'ers around the N TX area. Hopefully none of you were hit by last night's storm. Three killed in a small town about 10 miles north of me and MF1455v. Must have been a powerful tornado as news video showed at least one house stripped down to the bare concrete slab...

Due to family matters I have barely seen my land and tractor for the last 6 months. Finding myself with a few free hours this weekend, I decided to make sure my rotary cutter was ready for the new season. As I suspected, my blades were "frozen" to the stump jumper (see before picture attached)...

Trying to determine how well I can sustain my tractor related activities after retirement. My plan is to retire in just under 2 yrs. I know if you draw SS and work, you are penalized if you make too much in salary. What about income from investments such as 401K, IRAs, CDs, mutual funds, etc...

Some while ago, someone asked where they might find parts to add power steering to a 950. If that someone is still here, here is a <font color="blue"> kit on ebay </font>

\"Useful Links\" Thread The thread titled "Useful Links" suddenly disappeared with no explanation as to why. Was there something that was a violation of policy? It is common to provide a link to another web site when posting. It did not appear any different on this thread except that there were...

Here are some recent product recalls that may be of interest to some. <font color="blue"> News from CPSC - 3 Recalls and Public Calendar The following information is contained in today's email: 1) CPSC, Generac Power Systems Inc. Announce Recall of Fuel Hoses Sold with Guardian Home...

On threads with multiple pages, I could click on any page number and go directly to that page. Or click ALL and get the full thread. Now no matter what I click on, it always goes to page 1. Then I can click individual page numbers or ALL and it goes there. Is it just me? Or has something changed?

I know there have been a number of you retiring in recent times. Since I am approaching that, I have a question. I know if you start drawing SS at 62 and continue to work, the SS may be reduced if your wages are greater than some number. Question. Does income from investments such as 401K, IRA...

Driving to the "farm" this morning I saw a late model but very dirty Cadillac pulling out of a hay field. Pulling behind it was a LARGE round hay bale on a bale buggy type trailer. I guess that was his work vehicle. Wonder what the family car is?

Nearing retirement, I began to wonder how many miles I have driven just getting to work and back. After 40 yrs of driving 30+ miles each way to work every day, that comes out over 600,000 miles. Combination hwy/city and assuming avg 50 mph, that comes out to over 12000 hours (over a yr and half...

A bit off topic here, but I know of no better source of info than here at TBN. I have an aging cousin whose health is declining and beginning some mild dementia and has had to be moved to an assisted living center. She has no immediate family. I have a durable power of attorney for her and am...

What is a good free web site to be able to post a lot of pictures for others to be able to see? I have used snapfish.com before and it works pretty well. At that one, you compose an album, then send an e-mail thru that web site to whoever you want to let see the pictures. Just wondering if there...

Years ago, I made the mistake of planting Asian Jasmine as a ground cover around parts of the house. Now it has grown in, under, behind, and thru my shrubs. I would like to eliminate it all. But I have sprayed what I can without hurting my shrubs with Roundup (mixed extra strong) and broadleaf...

It seems many attached pictures posted in the various forums are very dark when I open them. Is it just my 'puter that has this problem? Or everyone? I sometimes copy them off and lighten them up just to be able to see the details better.

Took a driving vacation to Illinois and points north. Made a point to detour to Moline to visit the Deere Pavilion. Maybe I read too much into their web site, but I was expecting a large collection of vintage equipment and a lot of new stuff. The building was not as large as I expected. It had...

The muffler on my JD 950 had needed to be replaced for several years. Probably the original. It rattled inside and I welded up a few holes that had burned thru on the top. But I had balked at the nearly $200 dollars to replace it. However, a low tree limb made the decision for me. Now. The...

I seem to remember someone recently asking where to get a ROPS for an 850 or 950 or 1050. Here is one <font color="blue"> on Ebay </font>

Another roll over death on a small tractor in Montana. Be careful out there. <font color="blue"> Farmer killed in tractor rollover HAVRE - A 59-year-old Havre-area farmer was killed Memorial Day when his tractor tipped into a coulee and rolled several times, Hill County officials said...

Calling on help from North Texans. I have been trying to locate an old flat bed heavy duty trailer (as in semi) at least 30' long to build a bridge. Looking for something that is basically useless as a trailer, but still structurally sound (read cheap). Wrecked running gear, slightly bent steel...

Seems the subject of snakes is coming up a lot lately. I have found a large snake skin about 4 times in the last 2 yrs in my barn/shop. I have not been able to find a snake yet. I have looked everywhere I can get to with no luck. There are only a few places that I can't look, such as behind the...

Does anyone re-line old brake shoes anymore? My JD 950 brakes are wearing down. JD wants $72 per shoe (not per set) for new ones. Times 4 = almost $300 if I install them myself.

Here is a recall notice from the Consumer Product Safety Commission that may be of interest. <font color="blue"> ########################## FOR IMMEDIATE RELEASE April 14, 2005 Release #05-157 Honda Recall Hotline: (866) 784-1870 CPSC Recall Hotline: (800) 638-2772 CPSC Media Contact...

Rat\'s Nest Under the Hood of My Truck Took my F250 SD into the shop because some of my electrical stuff suddenly quit working. Service assistant just called and said that there was the biggest rat's nest he had ever seen under my hood. Wires had been chewed and shorted. Question. How do you...

Never heard of this brand, but some of you may have one since they are sold at True Value, Ace, and Do It Best hardware stores. <font color="blue"> ###################### FOR IMMEDIATE RELEASE February 15, 2005 Release # 05-110 Firm's Hotline: (800) 350-8739 CPSC Consumer Hotline: (800)...

I have a small (4x8) utility trailer rated (if I remember correctly) at 1040 GVWR. It has the small 8" wheels on it. Is there any reason, other than fender clearance) that I can't change the wheels to 12"?

Has anyone used one of the small 12 volt sprayers that TSC or Northern sells on your ATV or tractor? I don't want it to do area spraying. Just to spray along fence rows and poison ivy down by the creek. Looks like Northern has a Northstar stated as being ready for Roundup for $174. TSC has FIMCO...

Has anyone installed a Warn 424 (front drive disconnect) on their ATV? Satisfied with it?

Anyone having a 2000 or 2001 Rancher may be interested in this <font color="blue"> recall </font>

I am considering buying an ATV. I think I only want a 2wd model. Snow is not a consideration here. We have a small 125cc Suzuki 2wd at our deer camp that we have never stuck. We have run it with 2 men and a couple hundred pounds of corn on it thru mud and water. Even pulled a small trailer out...

Here are some recalls that may be of interest. <font color="blue"> 1. CPSC, Scag Power Equipment Announce Recall of Tiger Cub Lawn Tractors 2. CPSC, Electrolux Home Products Inc. Announce Recall of Husqvarna Lawn Tractors 3. CPSC, LG Sourcing and Lowe's Announce Recall of GardenPlus...

I don't know a better place for info than here on TBN. My wife and I are planning a short trip up thru Arkansas next month with a couple days in Eureka Springs. Have not been there in many years. We are considering staying at one of the old historic hotels there. Anyone know anything about...

Seems I remember someone asking recently where they might get a PS kit for an 850 or 950. Happened to stumble on <font color="blue"> this on e-bay </font> .

If anyone is looking for one, I saw one in a front yard with a for sale sign on it on Hwy 121 near Trenton. Saw it as I was passing by at highway speed. Don't know anything about it. Didn't see the model number. Looked about size to fit something in the 25-30 hp range. If anyone is interested, I...

I hate to say he deserved it, but............ <font color="blue"> Puppy shoots man </font>

Any of you north Texans know of a place where I can buy bulk compost, preferably north of Dallas. My wife wants a new garden for next spring and I want to buy a couple yards of bulk compost to till in to prepare the soil.

I have a 15.6 v Craftsman drill that I bought 5 years ago. I built my metal shop with it putting 1000+ self tapping screws. And have used it extensively since. It has been dropped off the building, bumped, and generally used hard and still works great. I am very happy with it. Now the problem...

Tuesday morning, 6am, driving to work, thinking about work that I had to finish that morning to make a deadline, 2 blocks from work after driving 30 miles, WHAM, slammed into a Chevy Tahoe at an intersection. Even though I have driven that path for the last 31 years, I was so totally deep in...

We always speak of covering of your tire tracks with your rotary cutter. Notice this guy was careful to keep it between his tire tracks.

Have cabins rented next week at Fun Valley camp ground at South Fork. A couple of friends have been there several times and told us what a great time they had. But looking for different view points. Anyone else been there and have recommendations on what to see and do? Or not see and do?

I kinda knew you needed to be careful when using a portable generator, but never realized how many people die from it. Here is a report from the US consumer product safety commision. <font color="blue"> FOR IMMEDIATE RELEASE May 20, 2004 Release # 04-141 CPSC Consumer Hotline: (800) 638-2772...

Any of you Oklahomans or north Texans ever bought a trailer from Oklahoma Trailer Sales near Durant? Looking at their web site they have a pretty nice looking 16' x 83" tandem with pipe rails, wrap around 4" channel tongue, and appears to be bulldog hitch. Price is $895. Not bad if it is a good...

If you purchased a Murray lawn tractor between 1997 and Feb this year, you may be interested in these 2 recall notices. <font color="blue"> This email contains the following information: 1. CPSC, Murray Inc. Announce Recall of Lawn Tractors 2. CPSC, Murray Inc. Announce Recall of Lawn...

"Annually 300 to 400 tractor related deaths occur on US farms" This contains some good reading. Sometimes numbers like this will reopen our eyes to the often ignored dangers of our toys. <font color="blue"> General Tractor Safety </font>

Anyone have any experience with or know of anyone having experience with the Yerf-Dog Rover ATV? I looked at one the other day and it looked pretty nice for a small utility type vehicle. I don't have need to haul heavy loads, so the overall load rating is not that important. The 2 seat with bed...

My tractor is 20 years old. The muffler has about had it. I have put off trying to replace it so far but it is getting louder and the insides are starting to rattle. The problem is that the heads of the bolts have rusted to the point that they are almost round. I don't think they are going to...

There was a recent discussion here on pipe fences. I saw one near my house that used pipe for the rails, but used square tubing for the post. Made a mighty nice looking fence. I suspect the cost is quite a bit higher than using pipe post. But the cutting/fitting/welding of the pipe would be...

\'97 F150 Trailer Connector Anyone have a schematic/wiring diagram for or know anything about how the connnector is wired for a factory installed trailer towing package. My brake lights/turn lights work on my truck but not to the trailer connector. They were a little flaky for a while. Now they...

Stumbled on this <font color="blue"> site </font> that really helped me understand the different type hydraulic systems. Basically confirmed what I thought I knew but brought the picture more in focus. Also seems to be a good source of parts if you go to their <font color="blue"> home...

If anyone has one of these, this recall should be of interest. <font color="blue"> ############################################### For Immediate Release CPSC Recall Hotline: (800) 638-2772 December 2, 2003 CPSC Media Contact: (301) 504-7908 Release #04-043 CPSC...

There was a discussion recently on the pros and cons of a log home. Some pros, lots of cons. Although I love the look of a log home, I am not really interested in building one. However, I am interested in a post and beam home. I love the look of the exposed beams. I am concerned, however, that...

There have been a lot of advertising lately on shingle pavers for paving driveways. Anyone had any experience with this method? I need to put a drive to my shop. I plan to put down a base of rock. I want to cover the rock with something to prevent dust when dry and mud when wet. I was thinking...

After 36 years and countless hours deer hunting in the hill country, I saw something this weekend I have never seen before. A small cat, only slightly larger than a house cat. Crept by within 6' or so and never knew I was there so I got a very good look. It's sides were sort of a mottled brown...

There have been numerous discussions regarding welding. And this may have been answered, but I could not find it. I know you should keep your rods dry. But how do you know if a rod has absorbed enough moisture to be bad? Actually, what is "bad"? Does it not weld properly? Is the weld weaker? Is...

This may prevent you some grief. <font color="blue"> MSNBC Story </font> It also provides a link to free download software to combat the invasive software. The free software seems to have been researched by credible sources to verify that it in itself is not just more trash. Haven't tried...

Would galvanized steel be good for a top for a welding table? Or just use plain uncoated steel? I am getting tired of setting my wooden table on fire.

This qualifies as "rural living near the big city". Another of our local big city newspaper classifieds; <font color="blue"> '48 Ford 8-end tractor, front end loader w/live PTO, PH digger & trailer. </font> Now that must be one versatile tractor!!

Time to start mowing again. Turned my cutter up on it's side to sharpen the blades. Found they were "frozen" to the stump jumper as usual. Each spring I find that they have accumulated grass, dirt, baling string, etc. and rust from sitting over the winter so that the blades do not swing freely...

I had to laugh when I saw this ad in the local big city newpaper. <font color="blue"> '87 Alice Chandler diesel 25 hp w/5' mower, box blade, turning plow. $4500 </font> I am guessing it was called in and taken by someone who has never been near a tractor.

All y'all in the eastern states might be interested in this recall of ground beef. It affects NC, Ohio, Michigan, Missouri, and most all states bounded by those. Don't want you guys (and girls) losing any seat time. <font color="blue"> Ground beef recall </font>

Anyone know what a JD75 FEL weighs? I am trying to figure out the total weight of my tractor. I know the bare tractor weight (at least the published weight) but not the FEL.

Here we go again. Sunday in mid 60's. Worked in garden. Planted onions. Monday high in low 20's. Freezing rain, sleet, snow, accompanied by thunder & lighting. About 2-3" sleet on the ground. Tonight prediction is for freezing rain. Then they say it will warm up and we will have thunderstorms...

Here is an interesting link to find out who makes tools sold by Sears. Sears Tools Manufacturers

The question has come up several times on how to store a post hole digger. I stumbled across this on ebay. Looks like another pretty easy project if you have a welder. And another good reason to get one if you don't. Post Hole Digger Hanger

I plan on having a stock tank dug since I don't have any permament water. I e-mailed the local extension agent to see if they offer any kind of assistance in designing/locating/building such a tank. He referred me to the USDA- Natural Resources and Conservation Service, saying that they had...

Any experience with electric motor power cement mixers? I am considering buying one. Have always mixed small batches in wheelbarrow or mud tub. But I have a few things I would like to do that would take a little larger batches. As much as I would like to have a gas powered or PTO powered for go...

Monday it was 77. Windows open enjoying the fresh air. Bird talking about out playing golf. Yesterday it was 19. This morning it is supposed to be mid to low teens. This weekend supposed to be back up in the mid 50s. This time of year the record lows run in the single digits (with a rare...

If you decide to buy a high dollar item in an internet auction (say a tractor for example to make sure this is "related"), see this warning</font color=blue>. Not exactly tractor related, but certainly a good warning to us all.

This may be of interest. It affects a lot of different equipment. <font color=blue>***************** For Immediate Release November 27, 2002 Release #03-046 CPSC Media Contact: Scott Wolfson (301) 504-0580 Ext. 1189 CPSC Hotline: (800) 638-2772 Tecumseh...

Here's one that may be of interest. <font color=blue> Subj: News from CPSC - Recall and Public Calendar Date: 11/13/2002 4:01:09 PM Eastern Standard Time From: "Cohn, Murray S." <MCohn@cpsc.gov> To: "CPSC Press Releases & Public Calendar" <all@list.cpsc.gov> Reply-To...

Used my tractor for a while last Wed. Went back Sat. and there was a LARGE puddle of gear lube on the floor under the left front wheel. Looked as if the entire front axle had drained. Apparently a seal completely gave way. It's a JD 950 MFWD. I haven't had a chance to look thru my service...

Had a break-in in my shop last week. They took my welder, mitre saw, cut-off saw, pole chain saw, tool chest full of tools, and some antique furniture my was storing there. All told, about $2000 worth. Broke a window and climbed in. I have insurance that will cover most all the loss. Just so...

I am on a product recall notification e-mail list. My wife and I own a day care center. There are often recalls involving children's items. I print these and my wife posts them in the center for parent's information. Also, there are often recalls on tools and other items that I post on TBN if I...

If anyone bought an air compressor from Northern tools recently, you may want to read this. For Immediate Release September 12, 2002 Release # 02-249 CPSC Media Contact: Mark Ross (301) 504-0580 Ext. 1188 CPSC Recall Hotline: (800) 638-2772 Northern Tool's...

Driving from Dallas area to Nashville next week. Anyone been I-30 Dallas to Little Rock and I-40 Little Rock to Nashville lately? Been a number of years since I was that way, but the construction was really bad then, especially thru Ark. Any better now? Or just more of the same?

I would like to get a 3 PT mounted log splitter, but I don't have an extra valve to run it. Is it feasible (or even doable) to remove the hoses from the bucket curl long enough to connect the splitter hoses to run the splitter? Then reconnect the curl. That would be much less trouble than...

This message consists of the following recalls: 1. Arctic Cat Inc. Recall of All-Terrain Vehicles 2. Black & Decker Recall to Repair Table Saws 3. Black & Decker Recall to Repair Cordless Drill/Drivers 4. Shindaiwa Recall of Hedge Trimmers Sold in California...

"No one is beyond suspicion when I am on the job."

Was looking at the Echo Pole Chain saws at the local HD yesterday. $350. Does anyone have any experience with these? Echo seems to be a good brand in standard chain saws, string trimmers, and such, but I have never heard any comments on their pole saws. Search on here only turned up Stilh pole saws.

OK, us Texans are always accused of trying to do things bigger than life. Well yesterday they had a little house fire in Dallas. Seems someone's little of cottage of a mere 70,000 sq ft (yes seventy) burned to the ground. Had been under construction for 7 yrs and was only weeks from completion...

Amazing how grandkids can bring out the kid in you and make you remember and appreciate the simple things in life. My son wanted to take my 3 yr. old grandson camping, so 2 weekends ago we went up to the "farm" and pitched a tent down by the creek. Have a shop there but no house yet. We cooked...

OK, all you do-it-yourselfers. My wife bought some wicker furniture for the patio. Protected from rain and direct sunlight, but exposed to the environment otherwise. It is finished in a natural (?) brown color, maybe some kind of varnish. She wants to know what to put on it to further protect it...

Curiosity question. My toys are 30 miles away so I can't run out and measure them. On a 6' (or any width) rotary cutter or mower, is it 6' blade tip to tip (cutting width) or 6' deck width? How about a tiller? Is it 6' till<font color=red>ing</font color=red> width or 6' till<font...

Anyone ever been to the antique tractor show held in Mesquite Texas? It is this weekend and I was considering going but would like to know if it is worth the drive.

How do I get rid of it? I have always been very careful not to open e-mail when I did not recognize the name. I would simply delete it. But I accidentally opened one whose text left no doubt it was advertising a **** site. It had a link which it said you could click on if you had received this...

My better half is after me to get her a horse. I will need to build a pole barn for it (them?). What should I use for poles? I have heard that horses will chew on treated wood post. What alternatives are there? I considered square metal tubing but then you have a potential rusting problem at...

If you have an older tractor without quick attach FEL and would like some forks, here is an idea. I needed something to haul logs, brush, lumber, etc. I have never had need to carry pallets, so I was not concerned about fork spread. About $15 and less than 2 hours and I had made what I needed...

Anyone here using a tiller on a JD 950? I am considering buying one. My tire width is about 66" so I would need a 6' tiller to cover my tire tracks. I could get a smaller offset, but then I would have to go the same direction every pass. Not all that bad, but a nuisance. The 950 has 27 PTO hp...

I seem to remember someone here recently looking for an hour meter for a 950. Just happen to notice one on Ebay now starting at $19.95.

Anyone see the Big Bud tractors on Classic Tractors on RFD-TV? 1000+ HP pulling an 80' cultivator. Said they could do 400-500 acres on a normal day or 800-900 if they really pushed it. Amazing machines.

The hole around the valve stem on the front wheel of my JD 950 is rusted out quite a bit. I have heard that the fix is to weld some metal backing to the inside of the wheel. Anyone ever done this? Do you just form a piece of sheet metal to the inside and weld around the edges and drill out a new...

If you have a RotoZip type saw, you may want to read this. For Immediate Release February 26, 2002 Release # 02-109 CPSC Media Contact: Kim Dulic (301) 504-0580 Ext. 1183 Roto Zip Recall Hotline: (800) 920-1467 CPSC, Roto Zip Tool Corporation Announce Recall of Handheld Saws WASHINGTON...