Search results

Sounds like someone has too much time on their hands

It’s a 1533 with synchro shuttle transmission

Do you check the oil in the transmission of Massy Ferguson 1533 with engine running or off? Oil in the sight glass on the differential.

Do you check the oil on a 1533 synchro shuttle with the engine running or turned off?

Question, do you check the oil level in the site glass on a 1533 with the engine running or turned off?

On a Massey Ferguson 1533 synchro shuttle, do you check the hydraulic oil with the tractor running or stopped

I have done both, highly recommend grinding the stumps. Saves a lot of work. Unless you’re a professional with a 12,000 pound machine it will take you three days to dig them out.

Dawn dish soap in a pressure sprayer well take them out of the air instantly. You will probably still get stung but if you can soak the nest good they’re done

I have put up light poles using light metal pipe 4 inches in diameter from fire sprinkling systems. Check with the company that sells fire pipe comes in 20 foot Lanks late enough to handle

Boomer 41

M&M Lift Truck 602-353-1096

Live in Phx.Az. Went to forklift salvage yard and purchased front carriage & 2x42" forks. A little welding to modify carriage & it attaches the same as my 6' FEL. About $400. invested.

New problem, Massey Ferguson 231 steering cylinders leaking. Tried reseal kit, no success. What is the secret? Where is the best place to just get new ones? Thanks,Chris

So the mystery is solved. Went to NH dealer, they let me talk to a mechanic. After listening to my story he said “ sounds like a fuel problem to me”. I didn’t know when fuel filters were last changed. When I changed the secondary filter I found it had water in bottom, there is also a sensor...

Need power steering cylinders. 3401285M93. Where to buy? Tried to reseal but they still leak, open to suggestions. I bought a seal kit, the shafts are good. Thanks, Chris

So any suggestions on getting rid of regen without totally making a big mess?

Yes it did regen, I parked it & let it run . It did what the indicator lights said it would do. Auto regen mode, 1 blinking @2 sec.- then burner on & after about 45 min back to normal. I guess since it is computer control one would have to take everything off & go back to the old days.

I appreciate your help, figured there was more to it than just re-routing the exhaust. The regeneration happens about every 4 hours and lasts for 30-40- min, according to the manual. Sometimes it does this with no noticeable problem, other times the tractor will barely even run, 800-1000 rpm &...

I have a NH Boomer41, 2015 with regeneration. Has anyone bypassed/removed this system? What happens if I re-route the exhaust and leave everything else alone?

Just signed up looking forward to getting some good information from all your tractor users.