Search results

Tested and works great. So for me, I removed the pipe that comes off the side of the rear remotes block and connects to the top of the transmission housing, connected the P port of the W. R. Long valve to the rear remotes block where the pipe was connected, and the T to the top of the...

Thanks for the picture! That’s how the directions say to do it, but with mine there’s an extra boss on the rear remotes port and that raises the hose up more than yours - causing the rear remotes lever to hit it. My guess is the Kioti factory install different adapter or hose. I posted to...

I’ve seen some people say they remove the steel tube coming from the remotes valve body and tie in their 3rd function hydraulics here. So from A port marked T on the remotes valve body to the P port on the WR Long valve, then from the T port on the WR Long valve to the spot on top of the...

I got the connections figured out but I have an issue with clearance on the rear remotes block. This is there the T or dump from the 3rd function goes. No combination of adapters provided in the kit or switching hoses around provide clearance for the rear remote levers. I’ll call EA attachments...

Hi All - tried searching the forum and did not come up with anything that could help me. I have a Kioti CK3510 HST with a KL4010 FEL and I want to install the W. R. Long 3rd function valve. The instructions state there is a steel tube that runs from the power beyond port on the loader valve...

I can’t get the Kioti third function kit right now, any option to use the rear remotes so I can use my grapple while I wait for the third function kit? Is it a pain to use or even possible? Thanks!