Search results

ummm Chinese stir-fry.

I would think at cold start (80 degrees) it should read around 45 and drop to around 30 idle warmed up.

The oil pressure gage may be faulty or giving faulty reading , sometimes gunk gets on the end in the engine during rebuilding.

sounds like ignition key switch.

let the pressure off and check quick connects for small amounts of water. Just small amounts of moisture / water can cause that.

Generally when someone wants something really bad I say " people in hell want ice water but don't get it" others , butt with your own head, need money like a hog needs slop, trials is what helps you know what you believe in, don't try and steal my thunder,get it while the getting good, can't...

May have to pour some dye in the thing to see where it's flowing from.

Most mahindra call for universal tractor hydraulic fluid GL4 , don't use Warren if it don't state GL4 , the least costly I've found is Sinopec universal tractor brake fluid it's gl4 rated 10w30 it held up great but I used in my emax25 with hst , ordered through walmart.com. Other than that the...

Might check the transmission sump screen filter, I had an old yanmar do that and it was the sump screen gunked up. Likely be messy.

find a bicycle innertube cut the tube in 10" pieces uncouple one at a time slide the rubber tube on the line and reconnect them slide the rubber tube to cover the connection and zip tie tops, may help.

Check out all tractors even those that don't interest you, compare everything and consider weigh, height from ground, type tired for intended terrain, got to get a loaded and four wheel drive, it's like anything you can get a lemon so reviews is your first action . Selecting the main part is...

Of course you've bleed the fuel lines good and I wouldn't be concerned with the new pump, perhaps a bent fuel line . I would cut à seven foot piece of water hose stick it down to the bottom of the fuel tank and siphon a gallon and see what's in there, diesel is real bad about gunking up with trash.

That's the best advice anyone could get, everything at once while the gettings good.

If it don't have one gonna need a tool box and a fishing pole rack in case you want to do some fishing down by the creek, h&h spinner baits always done me good.

Yeah tap and thread if nothing's moved should work out, clean out any metal shavings. Best hopes...

I ask because I never used the mid pto and was considering a mower deck but actually I believe going with a zero turn would be best. New prices for mowing deck for tractor is around same price as zero turn.

Might be a good time to pick up a generator big enough for a one room ac or the frig and freezer because if the grid goes down (likely will take a hit) everyone's gonna be running to get a generator.

God bless y'all with some mercy. Index gonna be nasty.

Thanks for the reminder, went online to home depot ordered another bedroom a/c, Louisiana heat has little mercy too, Feel like 105 today. Got one of those new U shaped things made by midea can open the window with a/c in, crazy but sometimes I check out new tech.

Thanks,

yeah because good hydraulic fluids have the ability to displace moisture / water where gear oil don't. But long as it's changed as stated it will be fine unless leaks allowing water in.

Just a cover over my head helps me greatly, I would consider a a/c cooled cab of I was going to be on the tractor long days for long periods of there are hornets in the area or killer bees and these new murder wasp. After all who want to get murdered by wasp.

If it's a clutch issue seems you should be smelling some clutch, perhaps the clutch pressure plate ? If it don't have a hydraulic system to the clutch peddle it should be fairly stiff to push but if it don't and the clutch peddle kinda flops or very easy to push check that out.

Likely the best thing that can be used under water, only problem as with anything used in soft areas is getting to a point where sinking or shifting stops. One of them good ole rock bottom creeks 👍

Those installed sit tub showers are crazy expensive.

Drain the old and put in the oil.

I like the pro running at all times, tractors can be dangerous without doubt but I one has a need for one then it's up to the owner to warn children not to run up to dad, mom, grandpaw, using a tractor if they do spank that a##. And if people are on your property that will be too close to the...

Does it feel like it's going into the high gears ? Or making a clunk sound when trying to put it in high gears ?

still have some in the freezer but around seven or eight I buried because I don't clean animals in hot weather. Smoked a thirty pounded last week give it the only rubbing on it will ever receive, spices.

human babies are cute too but generally don't start eating you out of house or home until the teens but at that point hopefully they will be leaving soon. That Fox squirrel is a perfect shot, I mean if there's a good enough reason like eating em.

Not just you, had / have a wild hog over population as with many States, it's so bad I HAD a corn patch 100'x160' in a few hours them out took it down to stubble that was the first sign on my property. Eased out the next night full moon walked right up On four corn stalk in their mouth them...

My bro in law has a Kubota with the narrow ag tired and when he has a good size load on the fel and turning sharp his tire will come loose from the wheel, I have industrial tires and never had the issue but I have a subcompact and his is a bigger compact. I've put his tire on for him twice no...

yeah the nitro piston replaced the old spring and suppose to shoot just as good in cold or hot weather and last in most cases years.

all I have is a angle grinder never let me down, I lift my rotary cutter block it and sharpen before every grass cutting ,weeds don't matter too much if the blade is some dull.

Drill a hole in the end of the pins and stick a nail in and bend it .

ain't that what they use to call bailing wire ?👍

Crosman makes a nitro piston several different models but I prefer the open sights on the vantage it's better and least priced and a single cock of the barrel pushes out 900-1000 fps, it states 1200 fps but that's the alloy lite pellets that won't hit anything. It will shoot clean through a...

yep ,hard time finding .410 in Louisiana, but most pawn shops that handle guns could receive ammo and send if they are the friendly type they may do it just for shipping charges. I have a .22 and plenty ammo but I prefer using my .17 hmr the bullet is .177 size but it's hauling at 2500 fps and...

Should be a rubber strap / band with a valve stem hole that goes on first before tube or tire that's what's suppose to keep the spoke head screws from cutting or rubbing into the tube, most of the time on old wheels they will rot and fall out when the tire and tube is removed. If they are not...

Yeah buddy some shop workers wouldn't admit a mistake on their part rather take to the grave. You did right by not accepting it like that.

Thank you, that's what I was wondering if I should invest in another zero turn mower or get a deck for my tractor, believe I will be better off with a zero turn. Tornado got my other zero turn mower and yanmar ym155 .

No seems you got to let that person finish the job because of the timing is actually off in some tractor injection pumps can be damaged and then need a complete rebuild, and we know that ain't cheap.

Just because they claim to be pros don't mean much to me anymore, I sent off a three week old generator that quit putting out electricity under warranty work got it back about six weeks later and had to check the ser# to see if they matched that thing was nasty dirty but it was the same one so...

Time to bleed some fuel lines and make very sure the fuel is clean .

yep this is what I was going to suggest because my tractor has knocked like he's stating twice once when it got water in the fuel and another time when I replaced the fuel filter and apparently got air in the line.

Long as the land has been used for a garden before and the pto speed is lowest 540 I can't see there being any issues, but if it's new garden I would be concerned of roots,rocks,pipes, etc., That could do some real damage. And your tire tracks will likely over lap and pack down what the row.

yeah I understand hot here in Louisiana also.

So you are carrying around a giant load that's really pulling you down, I understand.

Glad you found the problem, I recall one time a man wanted me to look at his tractor because the fel would only lift two feet, I found about 1/4 spoon of water in a quick connect hose. I am amazed how much I forget the older I get.

if it's a older tractor with 3-4 thousand hours and the hydraulic fluid hasn't been changed regularly ~500 hours the valve maybe stuck or perhaps broken valve spring ? Of course I am guessing and don't know enough about bx22. If it is a thicken fluid issue of it were mine I would go to Wal-Mart...

Might take the ground cable off the battery for a few minutes ,I guess it's possible the computer hasn't detected any change.

if that fuse goes to your pto switch it possible you already said it ,a wire is shorting out somewhere. I would follow along the frame to see if smashed wire somewhere.

I've taken measurements from belts that's broke on me and went to auto zone, napa , and told em I needed a utility belt in the size, most times the had it but in the longer belts like On my yanmar 155 (may it rest in peace) mower I had to wait a couple days.

Yeah, I would need to take the cap off the mid pto but I am fairly sure it don't spin when the rear is On but like you stated I'd need to see. More than that I was wondering if anyone has a mid mower and how they like it because I've located one for $500. On the older tractors if I remember...

Not that's it's important but has anyone noticed the 540/2000 rpm listed on the label where you choose rear or mid pto select on a emax25 ? Because I've never used the mid pto I am guessing that's where the 2000 rpm is or is there a combination of lever shift functions that can put the rear pro...

blow any grass stuck around the cylinder head with air pressure, that's assuming there are covers hiding the head and block.

Sweet, the world would be dull without tractors. You must be moving pretty fast to be rocking and rolling like that. I use my seat belt on steep slopes for sure.

Very sad anyone has tractor trouble, like a hurting friend.

I'm the case of pto shaft slowing same as the blades on an hst first thing I would do is clean the hydraulic fluid screen and filter, if that don't work i would worry if an electric clutch is involved.

I was in the belief that the tractor has no issues, therefore it's a problem with the rotary cutter. It's possible the hub that has the large bolt that the blades attach to has stripped out splines or shear key allowing the blades to turn until a certain amount of resistance then the blades hub...

Seems like a load of money to invest in something like that cause bugs eat like crazy. Lady bug could be useful but I'd grow grasshoppers for food, I hear the chocolate coated ones are really good. 😝

S Sounds like that thing has a keyway sheared on the gear inside the gearbox.

closed batteries are good and bad if everything works right you'll get good service but if something gets a small short enough to draw on a battery all the time or a regulator over charging fluid will need to be added to the battery. Something may have changed with your tractor instead of a...

had a friend purchase on of those that's cooled by a belt he got it cheap cause it was overheating and like you trying / tried everything except replace the belt and in this case that's all it was. The sides of the belt wore slick and didn't grab as designed.

I been using a ryboi electric for about three years, first month of use had to buy a handle at Wal-Mart cause the ryboi started leaking. Other problem like with most my house end got welded to the machine water hose hook up, aluminum sucks with corrosion. Try to find one with brass .

dude may have a point in some cases, I recall my uncle flipping the roll of twine because of a twisting issue. It's like spooling fishing line on a top spin reel if you spool the line from the wrong side it will kink and not cast but put it on proper you can cast a country mile. What's sounds...

Never knew a cat could crap more than three times in sixth seconds until I seen one keep jumping on a hot wire.

Yep ! Just got finished eating over two years of crow, went out cleaned like crazy found the tight packed tube end. Got a weed eater string poked twisted for five minutes finally got through, been that way from dealership new. Never would have taken another look if you hadn't stated yours had a...

I actually took battery cable off ,took cap off fuse box got a rubber baby snot sucker (clean) then sucked up some alcohol 50-70% clear stuff and squirted it the fuse panel then used a hair drier and dried. On mine I had gotten water in the fuse box / panel ,my tractor would not crank or turn...

yeah slag sounds like something I would like to use, I remember in the late 70s and 80s folks were using all types of stuff in driveways clam shells, rubber blocks, wood chips, brick pieces, just everything cheap for the most part. Thing is unlike the wood chips and claim shells everything else...

Rather use wood chips than crushed concrete ,gives one a nice soft landing in trip and fall conditions.

Wood chip drive would look nice just need to lime it to keep it from rotting, bet tree services would deliver it for free to get rid of it.

You right but get some string and a string level (cheap) and get your foundation eyeballed ,you don't have to level the foundation / earth just some post will be longer than others but if the idea is following the slope of your land I say go for it, 5% grade is hardly worth worrying about in...

Last time I believed I was smart enough to lay trees near my house I nearly took part or it down, limbs slapped the top but the tree was suppose to go the other direction. I don't cut trees near my home anymore but best advice I could give is make sure the wind is pushing in the direction you...

That's not good but I've run into about the same issue where I had a cut line , after using wire nuts I used metal roofing tape from a roll and smashed the stuff in and all around the wire nuts and when I was sure of a water right seal I taped it up with electrical tape, but my wire was...

might try a dab of leather boot wax on the eye, sounds like it just needs a good buffing.

Dirt dobber wasp done set up house somewhere in your machine I bet. Pressure wash and regrease be my first move. Hope it's easy fix.

I miss the old days when you could go into an auto parts store and if you were looking for an rubber O ring seal they would pull out a plastic tray and let you match em up yourself. Or get that good information to get you out of a bind.

The dealer I purchased my tractor (machines emax25) stated I should use Shell hydraulic fluid in my hst but after rounds of the useless stuff I tried Sinopec universal tractor brake fluid because it passed the specs and it was very good fluid but I went with Mahindra universal tractor...

I've checked a couple times outside and under the hood cause I couldn't believe they designed it like that but I am going to cut my own hole and run a hose like your stating.

purchased a Amico stick welder been well pleased, my son say it welds good as some couple thousand dollar welders he uses at work. 80% work capacity $180 bucks and it's 110 v, I had a flux core couldn't make any type of fair weld but it was cheap also.

picked up some at harbor freight ,actually one of the men in the Mahindra dealership shop told me that's where they buy theirs. Around ten bucks for around fifty about ten that I could use out of the lot.

You'll let us know about a week after you get it, be having too much fun to stop. You gonna enjoy that I am sure.

I am told my emax25 engine is made in South Korea 1180 hours no engine issues, only real problem with this tractor is the dog gone fuel cap area has a rubber cup around it and in a good rain will get water in the fuel, so I keep it covered with a tarp. Seems most tractors are going to give...

Keep or getting a 8 or 9 n I'm good working order can be the task and like another stated a rotary cutter can sure raise the front wheels in the air, personally I invested in something with a good sitting platform and lower to the ground (Mahindra emax25) it's a safer tractor and best I recall...

Yep, your last statement sums it all up "So any company can offer any warranty they want. Stand behind said warranty is a different story".

Want to know where that JD is made ? Look on the tags / stamps on your tractors. Google may get an embarrassing expression of it were human.

they likely would try to avoid your warranty but long as you can show the proper requirement fluid, filters, etc., Was used they will in most cases be ok, but there's the few you'd have to sue or threaten to ,long as they know you know the law on those things everyone will have a better...

Bout all one could do is build roll bars and use common sense , but thing is like others stated them box store lawn mowers ain't that strong , trans chain could snap them free fast ride, pop out of gear, slide, flip, just part of life keeping safe doing something we think must be done.

I'm most all cases the fluid being drained still has plenty of life left but the main reason is flushing out the breaking in loose metal flakes floating around or settled in filters ,in the bottom of the trans etc., When doing your own service the most important thing is cleaning the mesh...

You right about the Magnuson-Moss warranty act but if the customer don't know a manufacturer / dealer can still pull a fast one, I was helping out at a Mahindra dealership shop to help am get caught up and Mahindra would tell the dealership to pull a sample of the hst fluid and test it because...

I've looked at the tsc fluid but it didn't state on it that it was gl4 universal tractor hydraulic fluid , so if it don't state gl4 don't use it in the hst Mahindra tractor because your warranty will be void. If you can get the Sinopec universal tractor brake fluid it's 10w30 GL4, I used it it...

I wonder if the tractor is being run at high speeds with 4 wheel drive engaged, that's a much bigger monster than my lowly emax 25 but my manual states don't use four wheel drive in high speeds cause it can cause (uneven wear ) between the rear end and front axle gears. Seems that big of a...

I wonder if tractor manufacturers actually use the best fluids, can't say about the L2501 but I've tried different types of hydraulic fluids in my Mahindra emax25 (Shell tmx4 if I remember right) was the worse while Mahindra and Sinopec being the best I've used but even the Mahindra brand it...

Been using Bills Tractor last two filter service bundle for around sixty dollars plus shipping for filter bundle on Mahindra emax 25 when the dealer wanted about $90 bucks for just the air filter. Yeah no choice, same type stuff for much less.

I've pushed ten inch thick trees down ,dug a 12'x20'x8' deep pond, pulled pushed with a Mahindra emax25 but I take my time use good safety common sense and grease that fel zerts every day until the grease is an eyesore. All four corners of the bucket developed cracks (I weld it) thing is the fel...

living my dream, why , why , why ?

yep you sure stated a lot of truth there but fact are, just as well put China oil / fluid in that china/ Korea / Japan / India made tractors. For the most part Americans don't have a choice that could make a big difference due to the facts our government has for years outsourced just about...

clean your fuse panel first, disconnect battery. See what happens...

if the fuel is good I would suspect a issue with the governor, governor adjustment or weak governor springs.

If it's a has sounds like a sticking float needle valve.

sounds like the time I purchased a new key & switch for my cub and the new switch wouldn't work so I put the old one back on. May have a new junk part.

I've used the 10w30 gl4 universal tractor brake hydraulic fluid and it was great stuff ,functioned as good or better than the Mahindra fluid the Sinopec apparently gave my tractor more hydraulic power while operating fel lifted both rear tired off the ground flat footed Mahindra brand never did...