Search results

I had it raised, and it did not fall, but after I lowered the deck, and removed it. When I raised the remaining (orange) attachment frame it did fall. Since I have no intention of using the deck, this gives me more ground clearance. I will have to create a skid type protector attachment...

Thank you. This will be helpful

Whitetiger, Could you show me on the picture below where you " just remove the cam, grind a millimeter or two off of the top and reassemble when out of warranty." I numbered the two areas I believe you are talking about. My cam is not broken, or damaged. I notice that Kubota sprays what looks...

"Myself, if buying a new tractor with MMM, I would pay extra to NOT have that stupid mess of a drive over deck." I totally agree. I bought my BX23S for the loader, and backhoe. I am 74, grew up in the Kansas City area, and now live on Lake of the Ozarks. We just mow rocks, and trees. I would...

I found a great video on youtube that shows the problem. Kubota should redesign this "Mower link cam", and do a recall on all of them. The part number is K258144410. The guy that made this video only had 5 hours on his mower, and the dealer had to replace this cam. My BX23S is a BX23S...

Getting under the tractor this morning, the (let's call it a stair step gear) starts at zero, and as you turn it (while the deck raised to the top) every notch increases the cut height. When lowered back down the piece of heavy, welded steel ( pictured in lower right) sits on the gear, causing...

Thank you for the suggestion. Yesterday I was able to get the original dial setting from 3 to "top" by this method, but it would not go past "top". I went under the tractor this morning, and that gear is a mickey mouse setup. My suggestion to anyone buying a new BX would be buy the cheaper...

Today I got under the tractor, and took a few pictures of the height control gear. I tried to adjust the clearance on the gear, but no luck. I am beginning to think removing the gear by removing the nut in it's center, and loosen the nut on the lag bolt holding what appears to be a spring...

I sprayed silicone, and white lube lithium grease everywhere I could see something moves. What I am hearing, and feeling is the stair case type gear, at the bottom of Grass cutting height knob, is hitting against solid metal. If I can get the deck off I should be able to see the problem.

I also can see no reason it can't be connected like the standard deck, except the PTO shaft connects different, and since I am now stuck in the "TOP" cutting height knob setting, I have very little clearance. Also since the height knob only turns clockwise my deck frame only lowers to about 4"...

I bought this BX23S equipped with loader, backhoe, and drive over belly mower. The previous owner used it only 200 hours mowing 4 acres. I do not intend on using the mower here in the Ozarks because I have only trees, and rocks. I needed to remove the fancy drive over mower, and that is...