Search results

Nope

Yup, all good.

Agreed

Yes , my tech is still baffled.

Agreed , no problems since.

Had a kubota tech come over after it was split. He also looked and couldn't find any reason why it did what it did . He looked at everything and said he doesn't see e any problems , suggested I reassemble it , I did and it still turns. Bought all new filters and fluids yesterday , I'm putting...

Well , split the tractor. Engine turns and the shafts behind it turns. What now?

No

I had the glow plugs and injectors all out and the vslve cover off. I can't get any movement out of it at all. I drained the oil and ran a magnet through the drain pan and virtually no metal metal in it at all.

Oh I am ! I can't turn it at all either way. I'll have to get a bore scope to try to see in the bell housing.

I started with simplest first ( in very knowledgeable ) and pretty much eliminated the motor being the problem , pretty much with all the early tries I almost, all together , got a full revolution. The starter is still out and if I had a bore scope I could look in the hole where that goes , but...

No it's not.

I got this machine about 3 months ago , everything worked great. It has 2175 hours on it. I have the valve civer off and all is accounted for.

Oil is good , it's not Hydro locked ( I have the injectors out, I have the valve cover off and valves didn't drop.

I pulled starter, and injectors. Started fine in the morning to raise bucket and ran great the whole day prior.

Don't spin

Nope

Can't really roll it but jacked up rear end and everything spin in gear and out. Can not turn engine manually.

All fluids are good.

Yes , all in neutral.

IT'S NOT THE BATTERY!!!! Engine won't turn over even by hand . Ran it the whole day before. No issues , no problems, no excessive smoke , all fluids good.

Way past the simple stuff.

Need some help/ ideas. Kubota 2150 ran great yesterday. Started fine this morning. Raised loader so I could remove some brackets for the mower deck. I finished up and the loader had drifted down a little( which I expect) and then I lowered it all the way down while tractor was off. I went to...