Search results

I got a Virnig 54 on a B2301. I have moved quite a few logs and brush piles with good results. Wanted the EA 55 but couldnt wait.

It works fine for what im using it for now. I might make the skid steer mount for the front and center the motor with only 1 pivot not 2.

Yes, just been working on my house and wanted to post but got side tracked. Hyd valve from Summit I am not to impressed with but they work. I changed the spool over to the motor spool and when the valve was apart there was a piece missing. I used summit flat faced couplers and well lets say you...

Comes from the loader through the BH and to the 3 point. I installed the BH and lines and knew the blue line was low pressure just didnt know if the valve was low pressure return.

I only have about 50 post to put in. The soil is clay with some rock but when its done I will post pics and maybe a video. I know alot of people have posted on what torque, speed and gpm is needed so were gonna find out. I should complete the project by the end of Feburary.

Thanks

Manual says 4.7 so I figure 4. That should give me about 40 rpm at the auger bit.

Just got a couple of questions on the hydraulics for my post hole digger. Im using a 3.18 gear box with a Danfoss 6.9 cu motor mounted off the ssqa. I plan on using the power beyond from the backhoe to a valve, then to the motor. The question I have is there is three lines for the Kubota BH 70...