Search results

How do you keep your throttle cable in place?

Tried that. The imagine is not that good and both plug wires are the same length.

They dont have one open to the public.

I need assistance identifying which AC plug goes to what switch. LS XR4040/NH Boomer 41

I did purchase a new controller thinking that was the issue as well but it didn't fix the issue. I believe I have a spare thermostat somewhere. I'll give that a shot as well.

After fixing a circuit short in my AC compressor clutch, I reassembled my Tractor cab and turned on the AC unit. Initially, everything seemed fine for about 2 seconds, but then a loud POP sound occurred. I ruled out fuse issues. However, I later discovered that I accidentally swapped the AC temp...

Update. So the parts I replaced were because I was already there and had access to it. The original problem was A/C just shorted and failed due to the A/C wiring running form the A/C clutch rubbing on the compressor. Its been a 4 month project on and off. But I did replace the A/C nob controller...

XR 4040 No AC power. I've replaced the A/C compressor due to a short on the a/c clutch. I've replaced Air Con resistor, Blower fan relay, and A/C control board. The light indicator on the A/C panel is not coming on or the LEDs. Fans are not blowing either. A/C has 0 power. I've checked the fuses...

I love the extra tips on this forum. Thanks for sharing.

So I have bacteria in my fuel tank and filters. After changing the filters and applying treatment for the biofilm my regen finally cycled after about an hour. I suspect there is something more going on still. If anything changes over the next couple regen cycles I'll keep the forum posted. I...

You're a champion. I was searching the forum for 2 hours last night. This is exactly what I was looking for. Someone who has done something about the regen. Giving me peace of mind to do the job myself. Thanks so much for sharing this.

Did you figure out what was going on?

I don't own a scan tool for the tractor. I have the round connector on my tractor. Is there a scan tool you recommend?

2014 XR4040H 900h. Regens every 4 hours. 2-3 cycles ago the Regen cycle lasted 2 hours then back to normal. Now the Regen won't turn off. I was Regen and running the tractor at 2000rpm. Now if I Regen at 2k RPM the warning lamp comes on and the Regen cycle stops mid process. If I keep the RPM...

I just swallowed the bullet on a new compressor from a LS dealer. Almost $800. I didnt factor in how expensive replacement parts could be on a LS.

I do have a manual. I just removed the compressor. I'm attempting to find a replacement that's not $600 before shipping. Or a possible universal AC compressor if that's a thing.

So the Ohms read 3.4 cold and bounce over 5ohms hot

I've pulled as much wire to view hot and ground. I'm not seeing any other compromised areas. I haven't unravel the wire cover/conduit to see if there is compromised wires covered up. I'll check the coil resistance on the clutch and get back with you. >< hopefully I can check it without removing...

Hello I'm having trouble locating an Issue with my AC unit. AC runs for about 5-10 minutes when cold before blowing the 10amp AIR CON fuse. And when the unit is all warmed up AC doesn't run cold for more then 5 minutes. I've chased all the grounds and made sure there is good contact. The ground...

Thanks. Its weird I thought I've been a member for years. I guess similar to radio fans "I'm a long time viewer, first time register"

Very handy indeed. I'm shopping for another tractor. Just making sure the new to us tractor has one or has a kit available for it.

It is more of a linkage setup because it moves in interior lever up and down. Sorry about that. I saw this on a tractor in person and forgot to take a picture in person and this is the best I could find on the internet without knowing what it is.

I need help identifying what this is called. It activates the lift arms from the exterior of the tractor.