Search results

Scott did you ever get this problem resolved?

A suggestion on how to feed back to tank, since no additional ports?

So I pulled out the plug that you circled and put normal plug in and 3 pt hitch seems to be working fine. I have not put a load on it yet, but believe this fixed the issue. I reached out to Brand support during this and kept saying I needed PB setup. I was suspicious since it was not on...

Wow, thank you so much. I will check it out and let you know.

I did what you said and the 3pt hitch does seem to work when I move the loader.

Will do, thanks

Diagram of Brand Control valve above is how it’s hooked up with with the P on inlet port and N on outlet port. I have tried to switch N and P and it does nothing. There are 6 hoses originally and none were changed. I did have to get 90 degree elbows for Inlet and Outlet connections. The...

Here is the original control valve. I just noticed that it has a PB port that was not used.

Below is information from the controller valve and how I have it hooked up, plus information from Tractor service manual on hydrauli.

Couple photo, one show block and hoses that go to control valve.

The control valve has 3 connects. but tractor only has 2. I have not ordered the power beyond part yet since not sure this valve will work.

Just a lever on right for 3 pt. Some times my 3 PT hitch moves slowly with no weight on it.

Need Help, I have 1989 Case IH 275 with a Dual 105 loader. The loader valve has a broken valve and is leaking. I have replaced it with a Brand LSV22RFSTKA2b control valve. After installing my front loader worked fine, but 3pt hitch no longer works (Some times moves very slow with no...