Search results

This boots fits 25 models of New Holland tractors

Yes sir, I see on Messicks.com site it is used on 137 models. Seems like there would be some decent used ones out there.

I think that is a very good idea. I’ll put a coat of Flex Seal over the Flex Tape. Should outlast my tractor riding days. My wife reminded me that I don’t think twice about paying more than $100 for a pair of shoes about every 6 months but I won’t spend the same amount one time for a rubber...

I cut strips of Flex Tape and got all the holes closed up for now. I had to do something to keep the wasp from getting underside of boot. Last summer, I raised the loader bucket and 5 or 6 wasp came out in full attack mode. Also Mud Daubers like to build rock hard “mud pies” on heim joints.

Several splits in it especially when I raise the bucket.

This is the boot I need. Boot fits in a 3 1/2” square cutout and about 3 1/4 “ tall. I have tried to find an automotive shifter boot but most fit flat on the floor pan. I was told this size boot was used on several models of Ford/ New Holland tractors. Just keeping my fingers crossed one can...

Reposting.. Sorry I accidentally deleted my original post. I‘m looking for a New Holland 86530982 rubber boot for the 7308 loader valve on my TC33D. Hoping to find a used one in good condition or a NOS taking space on the shelf that won’t cost me a kidney. I not going to pay the ridiculously...

Used Ford SBA398112750 Rubber Boot in very good condition. OEM part, not aftermarket. $29.00 PayPal Free shipping to lower 48

Sorry, it’s gone!

I appreciate all the feedback. When I told a friend of mine I wanted to get a set of clamp on bucket forks, he showed me his used Kubota and it had a “smiley bucket”. The previous owner said he used clamp on bucket forks and it had bent the bucket. I’d rather have a flat straight edged bucket...

Anyone using clamp on forks similar to these? A set of forks would sure would be handy to have. I wouldn’t be picking more than 300-500 lbs. but I don’t want damage my bucket.

SBA360101470

I replaced the power steering reservoir/filter on my TC33D because it thought filter was starting to get stopped up causing steering to be sluggish. I drained and installed clean fluid but it turned out the filter was fine and not the issue but had a kinked hose. Anyone want the old one? I know...

Thank you ruffdog. That’s what I’m looking for.

I am looking for a 5/8” id x about 10” long hose that goes from the hydraulic oil reservoir to the power steering pump on TC33D. The first nylon reinforced hose suitable for hydraulic oil I used, kinks at the offset so I tried to replaced it with single braid hydraulic hose. It has a stainless...

I was reading a few reviews on eBay about the aftermarket and most have the same complaint as yours. Ghee, I was hoping the one from Amazon would last a little longer. Now I’m a bit confused! Putting a clamp around the shaft to make it stationary might be my best bet but a new steering filter is...

Thanks, that is what I was hoping to hear!

I have 1999 TC33D with about 2100 hrs and I think the tilt steering strut (#86522914) is worn out. When the column is locked in the up position, the column will still move up and down. My question is: Do I need to spend the $120.00 for an OEM or will the $50.00 aftermarket one work just about as...