Search results

I'm getting ready to downsize next year and will no longer require my BX-24. I was hoping I could get an idea of it's value along with the attachments. My neighbor is interested in buying it from me, so I'm looking for a fair price. BX-24 with 200 hours Loader Hoe 48" mowing deck Powered...

My BX-24 has 175 hours on it. I found a large puddle of hydraulic oil on the floor of my garage this morning where I keep it parked. I put it up on ramps, and crept under it to see what might be going on. The entire transmission in the vicinity of the filter is wet with oil. It's soaked in...

I took a video this morning of the 2750D snowthrower in action. Amazing accessory which has greatly shortened the time spent outside with the walk behind.... Kubota 2750D Snowthrower - YouTube

I'm looking for a drip pan approximately 5'x10' the will catch snow melt off my tractor and snow thrower. Here's the caveat: I use chains, so the material has to resist tearing. There are several brands that use a thin plastic poly liner, but I don't think it will last long with the chains...

This morning we received our first plowable snowfall, so I was anxious to try the new BX2750D snowthrower which has been mounted to my BX24 since early November. Threw open the garage doors, started it up, and hit the PTO......nothing! Cycled the control lever a few times, still nothing! Set...

I mounted my new snowthrower to my BX24 today. I have a couple of questions with regards to its operation. 1) Is it best to allow the snowthrower to "float", or should down pressure be applied? 2) When the snowthrower is engaged, it's pretty noisy while it's running. I don't think there's any...

I mounted my new snowthrower to my BX24 today. I have a couple of questions with regards to operation. 1) Is it best to allow the snowthrower to "float", or should down pressure be applied? 2) The thing s basically noisy when it's running. Does this sound normal?

If this won't get me out in the morning, I'm going to just stay home from work. Still deciding on whether or not I need chains.

I got my sub frame out today in preparation for the arrival of the snowthrower. I noticed that one of the "rings" that will hold the shaft assembly appears to be bent. I took a picture of it looking directly down on it. Is that the way it's suppose to look? The sub frame is used and came...

I currently use a Kubota 2763A plow with the subframe aka. the Quick Hitch. I recently ordered the BX2750D Snowthrower and PTO kit. I got a message from the dealer saying they want me to drop off the hitch so they can "install" the front PTO on it. Never seeing a complete snowthrower...

I currently use a Kubota 2763A plow with the subframe aka. the Quick Hitch. I recently ordered the BX2750D Snowthrower and PTO kit. I got a message from the dealer saying they want me to drop off the hitch so they can "install" the front PTO on it. Never seeing a complete installation before...

I just picked up a BX2750D snow thrower this weekend (It's August, and I just bought a Snow Thrower!! - TractorByNet.com) I already have the quick hitch so I didn't need to add that to the price. I'm wondering if there are other users that use the hitch for both plowing and snow throwing and...

I Just got back from my Kubota dealer here in central Massachusetts, Ahearn Equipment. After discussing the pros and cons of front and rear units, and the fact that I already have the quick hitch for the Kubota snow plow, I decided to go the the BX2750D front plow. I also needed the PTO shaft...

My BT601 backhoe has been off my BX24 and sitting on a dolly since early winter. Today, I rolled it out to use it and I ran into a problem. I couldn't attach any of the hoses. They wouldn't engage completely. It appeared that the "valve stems" on each hydraulic connector was frozen tight...

I'm working on a storage scheme for my plow, but I'm also thinking ahead to next fall when I'll need to drag it out again. Question: Can the loader be installed with the quick hitch attached to the frame? The storage process will involve pulling the plow out, then placing the loader in the same...

I'm thinking of selling my 2763A plow and replace it with a front mounted snowthrower. I have a few questions before I do this: 1) Which model snowthrower should I be looking for? 2) Should I hang onto the hitch, or let it go with the plow? 3) Is there another brand available beside the Kubota?

It stopped snowing, and the sun came out, so I decided to post a short onboard video of my BX24 with the 2763A plow in action. BX24 plowing video

My arms are about to fall off from hand raking white pine needles. I must have raked several cubic yards of needles today. There has to be a better way. I hand raked the area once creating many small piles of needles, then raked them into my loader. Afterwards, I kind of scoured the lawn...

I use my tractor for mowing all summer, so in late spring, I set the backhoe at the edge of my woods where weeds begin to grow up around it. I often put off chores which involve using it only because it's pain to get on and off in the uneven terrain. So this year I decided to leave it on my...

My BX24 arrived with the little exhaust tip point back towards the rear. This got soot on the cowling. This past week after a thorough soaking in PB Blaster, I freed the tip and pointed it forward. Now it's getting soot on the brush guard. I'm thinking a chrome stack would look great , and...

Last fall, I stored my BX24's MMM deck upright, and on the little wheel set I purchased from a dealer here on the forum. Today, I went to prepare things for the upcoming season, and found a pool of gear oil beneath the deck. The oil appears to be coming from one of the silver nuts. on the body...

(cross post) I'm thinking about leaving the grass collector off this mowing season, and going with the mulching kit. Has anyone installed this kit on their existing 54" standard deck? How hard is it to change back to the rear collector? I was told there is some drilling involved to install it...

I'm thinking about leaving the grass collector off this mowing season, and going with the mulching kit. Has anyone installed this kit on their existing 54" standard deck? How hard is it to change back to the standard rear collecter? I was told there is some drilling involved to install it...

I need to cart a couple of yards of concrete to an inaccessible area about 350 feet off the road. What is the practical volume in cubic feet of the LA240 bucket? I need to cart it down a hill and across some rough terrain, so I don't want it sloshing over the side of the bucket. Then...will...

I need to plow right down to the driveway surface in order to get up my steep driveway. I'm looking for a soft blade edge that will fit my BX2763 plow so I can literally squeegee the snow off my driveway. A seach here turned up something called a B2766 Kubota Edge, but I'm not having any luck...

This little tractor is an animal in deep snow here in central MA. My problem is that often while plowing with the 2763 blade, the front tires lift off the surface, and I start to go wherever forces want me to. I'm in 4WD, with the differential lock set, turf tires, backhoe on, and floating the...

While trying to flip a large stump over, it slipped off the edge of the loader bucket, came bacwards towards the tractor, and one of the large roots smacked the hood cracking the plastic headlight bezel. Is there a place online that I can obtain this part?

Planning on re-mounting the mmm this weekend after storing for winter snow plowing. It came off easy...but it was just so darn heavy! Are there any tips for getting it back on with a minimum of skinned knuckles and swearing?

I've been searching without success for a good lawn dethatcher that attaches to the 3pt hitch of my BX24. I can find the hundred dollar tow behinds that Lowes and Home Depot carry, but there has to be a quality, 3pt hitch version out there. Any recommendations?

If I'm interfacing a "foreign" piece of equipment to the loader control valve, How do I determine which connection does what? I'm connecting my BX2764A plow to my BX24's control valve. The tractor has RED/BLU/WHT/BLK hoses. The plow has RED/BLU/GRN/YEL or WHT (not sure which as it's pretty...

I purchased the lightly used BX2763A plow today that was on the Hartford Craig's List for $1200. The ad was circulating around here earlier this week. The seller had no instructions, so I was hoping I could get a few questions answered. 1) The plow and sub-frame came off a BX23. I assumed...

Does anyone have buying experience with the Kubota 2763A 60" plow blade. Got a quote of $1700.00 without unloader valve, and was wondering if that was a fair price.

The throttle is slipping on my new BX24. Is there an adjustment somewhere that I can tighten? It drops back, not the the other way around.

Some guys like having a picture taken with their Black Marlin, or a big elk. For me, this has been my personal "white whale". I've worked on this stump for several days trying to get it to budge. Several times, I was tempted to push the dirt back in the hole and give up on it. I finally had...

I had my backhoe out for the first time this evening, and it was a pretty shaky first attempt. First, I when I plunged the bucket into the soil, many times I'd skid the tractor backwards on the outrigger shoes. What am I doing wrong? Too much of a load? Secondly, it's real easy to whip the...

It's either a problem or I'm doing something wrong. When I shift the speed to high range, The transmission bogs down like it's under a heavy load, but it barely moves. It runs like crazy downhill, but if you turn it around and start uphill, it will not go at all. The tractor was just...

New owner here, having just taken delivery last night. I have this thing about leaving equipment outside and would like to store the FEL out of the weather when I'm not using it. If I leave it on, I know I'm going to eventually rip the siding off my house, or run it into a tree while mowing...

As a new BX24 owner, and coming from a typical lawn tractor, I'm completely unfamiliar with what's available as far as accessories. What I was wondering is if there's a soft edge available that attaches to the loader bucket that would easier on the driveway. I was thinking of something like...

Can anyone tell me how good (or bad) the grass collection attachment is on the BX24? Could it replace a Cyclone Rake? I've got the green light for the tractor and mowing deck, but wondering if it's worth getting the collection system too.