Search results

Weird thing is if you type in the part #s it may come up with a 2 letter prefix and list for Cub Cadet or show as a kubota part. Is there a chance the wrong fluid was in the hydrostat making it sticky?

Just a quick update on a past post from Nov. I took my DK40 back apart and checked everything I could think of or had equipment for. Release bearing forks are tight and no deflection when twisting between linkage arm and forks with a crescent wrench and channel locks. Flywheel runout is only...

If I start the tractor in gear with the clutch depressed it will start and does not start to fully engage till the pedal is 2/3 of the way up. I have about 1/2 inch of free play in the pedal and again if I am moving the ctutch starts to dis engage with the pedal about 1/3 of the way down. the...

Well I am about to tear this thing apart again, if anyone has anyone has any other ideas all suggestions are appreciated .

Every thing looks pretty much virgin on the clutch linkage. I did have the operator station clear off when I split the tractor to replace the disc . I was able to clearly see the linkage and arms at that point. Still going to try to see if that is an accesable inspection plug on the top of the...

It is a single disk clutch pedal linkage is all tight and mechanical

I have a 2003 DK40CR Kioti shuttle shift tractor with 675 hrs. It runs well and all the gears work fine including the shuttle shift eccept for the fact that the clutch does not completely disengage. I bought this tractor with 630 hrs site unseen on tractor house and had it shipped from Michigan...