Search results

try repairclinic.com

Yep. That's what I thought until I dug into it. Ha...no cable! I think I have a kioti experiment!

Looking for any DK35 users out there. Have questions and can't find answers. Is your 35 tach driven by cable or magnetic pickup? Ever have issues with the tach? My 35 serial number says its an 2003, bought in 2005, wired like a 2007 35SE. What the heck? My 2003 35 workshop manual does not...

Ok....old farmer, retired mechanic. You will never learn you machine having someone else do the work! You will never understand what will drip and what should not. What hangs down or pokes out and what should not. Mechanically inclined or not...do it yourself. As far as hours go...no big...

OK so what kind of machine? They can all vary on hose routing. Is the line going directly to the bucket or from the joy stick

Interesting comment. I own a Dk35 whose serial number says 2003. (Bought early 05). My May 2003 manual has a wiring diagram that does NOT match my tractor in several areas. I have magnetic tachometer for one. I emailed Kioti, but they have ghosted me. How are you determining the DK35 versus...

I don't think a 5ft tiller would be a problem. Keep your rpm up and don't expect to go 8 inches deep on 1st pass. Tillers break up the clods and stir the dirt. If it's roick solid ground, plow it first.

I guess you looked at it from underneath? mine has a safety lock under the post.

One other thing...silly, but, check ALL your fuses. Kioti is Notorious for changing system without warning.

Your system is not letting the alternator know it needs to charge. If your confident they did a load test on the alternator and your belt was tight, then you has a loose wire in the tractor. on my DK35, there is a plug of two wires that clip into the alternator. This is a voltage feed that...

I am looking for a DK35(40) Electrical system wiring Diagram. My Workshop manual is apparently for an older DK35 and the wiring diagram does not contain info for the Tach/hr meter (which is mag style not cable drive.) There is also no indication of the FFT Assy (Display unit). Any Help or...

I have been looking at the Jinma Compact Round Baler (870 i think). Has anyone out there bought one? Used one? Seen One? As part of a Co-op of small farmers, we find square baled hay easier to Handle but our biggest tractor is a 35 hp. It tends to strain our tractors. This little round...

Need Some advice... My Neighors 8N runs great, we just rebuilt the 3 point, but we still have an issue. Here in the mountains of Kentucky when the fuel gets below...lets say half tank...you don't dare stay on the side of a hill tilted to the left. Once the fuel runs out of the bowl, you have...

Does anyone know where I could find a pair of used/good condition MF3 baler threading needles? My local dealer quoted me a rather stiff price so I thought I would look elsewhere before I had to sell my truck to fix my baler!!! Thanks :confused: