Search results

Unfortunately, it had a low coolant meltdown engine locked. Electrical- main fuse blows instantly when key turned to ON. Have removed all other fuses, still the same. What's next?

I've searched a lot, can't find if Mitsubishi S3L2-Turbo has iron or alum head.

Before I make a 4hr trip to a tractor, what size socket to turn the crankshaft bolt? To see if engine is locked up.

3215 radiator ran dry while I left it running to purge air. New tractor to me but obviously poorly maintained. Small puddle of antifreeze on the floor and tractor had shut down. Now it's no crank no start. Main fuse blows immediately when key is turned. Is there a look coolant switch

3215 radiator ran dry while I left it running to purge air. New tractor to me but obviously poorly maintained. Small puddle of antifreeze on the floor and tractor had shut down. Now it's no crank no start. Main fuse blows immediately when key is turned. Is there a low coolant switch or...

The diagram for fuses is probably on the fuse box cover, but it's missing and I can't find one to buy. I've looked in my 500pg 15 series manuals and can't find fuse diagram.

On Mahindra 3215 that I got recently,used,this object is not listed in the parts list that i can find, nor in the operator's manual. It's on the right side of the seat, on the floor, but I can't get it to move or tell what it's for. Put a pair of yellow scissors handle to help it show better.

I have an acre of field grass. Its also lumpy and bumpy. I want to get rid of the grass and smooth the field with a box scraper. Kill the grass, run a disc over the field, then the scraper box, or?? Or kill the grass then turn it under with a two bottom plow? 33HP

I've downloaded the 392 pg service manual, but no mention there for fuel tank removal. Tractor is 4 hours from my home, need to know what to prepare for. I can certainly figure out what needs to be unscrewed. But some tractors require removal of steering wheel with puller for this procedure...

Mahindra 4x4s, at least the 3215 are famous for destroying the front pinion gear and shaft. Is there an aftermarket source for higher quality for this part? Or a place that could heat treat an OEM one to make it harder?. I've got to replace mine and don't want to have to do it again a few...