Search results

I put all four from a BX23 on my 2018 GC1710 TLB. Perfect fit. They weren't loaded but my yard is pretty flat. The turf tires should work better when plowing the driveway.

Sorry about delayed response. I was at a campsite with very poor wifi. I'm going by what the previous owner showed me. The end of the hoses have different colored wire ties to ID which ones goes where. I ordered a two position valve and that's a simple way for me to send to pressure to one or...

It's possible about the wrong lines connected. I was following the colored wire ties indicating which lines go together. As you said, maybe there is a mix up with the lines. I downloaded the service manual and will look at the hydraulic diagrams. Thanks for the advice. Eventually I'll get it...

Is it possible on the newer model they changed the hydraulic circuit. Yesterday afternoon I forgot the lock the deck up with the knob and when I relieved the pressure to disconnect the lines I wasn't able to raise it without re-connecting the hydraulic line. The pressure line has two different...

I just started crawling around under the tractor to see how things work, hidden grease fitting, dry bushings etc. Lots of pivot points and linkages to lube and check the general condition of the undercarriage.

The way the hydraulics is plumbed, the pressure either go to the backhoe or the 3-PT lift cylinder. I need it to raise or lower the mid mounted mower. The linkage for the mower is moved by the lift cylinder.

I checked the clearance between the 3-pt arms and the backhoe framework. There is room for the arm to move up and down without any interference. I did have to put the PTO shield to it proper position. The reason is that I want to install a 3-way, 2 position manual valve so if I have both the...

It's a 2014 with 390 hours on it. It looked like it was covered by the shiney paint. It came with the slip on forks and the toothbar. I have the skid plate in a box and will be installed as I do the service. The headlight bulbs were change to LED's. I found a Kubota ROPS tool box on eBay cheap...

I just got the tractor last Friday and the grass was already 5 inches high so I just tried it out. I will play around with it this weekend and practice taking the attachment on and off. I watched a few videos and it looks pretty easy. Practice makes perfect. I ordered the oil filters kit from...

I didn't realize there would be interference with the 3 pt arm and backhoe attachment. It's isn't a big deal but I just thought I could make it easier to operate the mower or backhoe. I did make sure the lines are tucked away not to get pinched. The bungee cord works. Thanks for the info.

I'm new with this so some questions might not make sense. It is a 1710 TLB. There is a hydraulic hose that is either hooked up to a line going to the bucket attachment or a line going back in to the rear of the machine. I think it works the 3-point hitch. If I need to raise or lower the mower...

I just bought a MF 1710 TLB and was wondering if I could install a Tee to the hydraulic feed line and have both the bucket and mower deck lift work without switching the feed line back and forth. My property is mostly flat and after I cut the lawn I go back to cleaning up the property line of...