Search results

I set mine at 2500psi per dfkrugs recommendation. I did not other testing.

My Diggit em15 was at 2300psi before adjustment.

I’ve got some juicy details on the Diggit em15. This appears to be the manufacturers website. https://leking.net/205.html

The Diggit EM15 has 180x72x41 tracks.

Their website recently had a big overhaul. Here is a page with some parts and attachments. https://groundhogequipment.com/attachments/

This is the Diggit mini x being compared to a groundhog excavator

Yes, the spring is under compression.

I measured and removed the plug which revealed the suspected spring. The o-ring looks fine to me.

I removed the cap. It was not on that tight and had hydraulic fluid in the cap. I felt the bottom of the cap before I took it off, no fluid. What do you suspect the plug on the inside does?

Thanks for the info on the fan. I have tried to isolate the fan with some fuel hose standoffs. Fingers crossed. Your right, a better fix is not that expensive.

I have a slight weep of hydraulic fluid coming from the right seam of the center section at the bottom. Any thoughts? I tried to tighten the assembly up, but it was very tight. Maybe a few drips in a 20 minute run.

Here are a few things I have done to my diggit em15. Fuel filter - maybe not needed but can’t hurt. Throttle limiter - a small piece of thermoplastic Exhaust extension - door still opens Rpm gauge - I have set the limiter to 3600 rpms Brushless fan - 157cfm, 9 watts Hour meter - machine did not...

I have been looking for more information. There is not a lot. On the auction sites some list a 5.5’ dig depth, about 8.5’ dig height and 9’4” reach. For weight I found one auction site listing at “880 kg load capacity“ and another “GVWR 2425 lbs”.

I was very happy with the price. Yes, mine is the same as your posted mini-x. I am wanting to add some weight to the back. Do you think I could add 3-400 lbs without trouble? I am looking at screw on filter assemblies. They range from 10-30 microns or so. Any thoughts on the appropriate filter...

Thank you for the info on the pressure. I’d like to get everything out of it that I can. I purchased it in Marysville,Wa $5900 for the machine, another went for $5700. 3% auction fee and 9.4% sales tax. Teeth vertical in the dirt, no curl?

I‘m new at this. I purchased the diggit em15 at auction recently. What are the signs of low main RV setting? Also, I found that rustoleum 2x ultra cover in marigold is an almost perfect match for this mini x. Mark