Search results

Some ball joints can be greased using a big needle on the grease gun. They used to use them on car ball joints. Probably could get one from auto parts store, but still a pain.

Thanks for your reply. I would think that Mahindra does have, but to this point I haven't located it. Thanks again!

So I adjusted the brakes today to the lowest setting for max brakes, they work great, but tractor still wants to creep even with the brakes in the park mode. Is there any way to adjust the forward/reverse pedals externally? I do tap the reverse pedal and that does stop the creep for a bit and...

If they aren't greased they stand to make some big money when you replace them, at least that's the way it seems with Mahindra

I have the same problem with my 2016, 2538. Called the dealer and he said they do not sell just the boots, would have to buy he whole thing, right side was 192.00, left 187.00. I'll wrap it with old innertube and zip tie it first.

I have the 2538 also, and it creeps the same. I also hit the other pedal to get it to neutral, and it stops, but in a few seconds it will start creeping again. Also the FEL control seems jumpy. Maybe it's just me, but wondered if The hydraulic filter might cause some of this? Again thanks in...

I guess I better change my address, because after all this there ain't no money, LOL

Finally figured it out. The wire from the battery to the starter was barely long enough to reach and when I changed the terminals on the battery there are 4 heavy wires, and that one slipped down behind the battery. I thought I had them all but was lacking that one, so click, click, click was...

I will try that thanks

The new terminals are tighter than the old ones, they are lever clamp style

I did not switch cables, just switched out the terminals, and all lights work, as well dash lights

So yesterday, I started my 2538 open station Mahindra, let it run for a few min. Then I wired my new rops light. works like it should. I also replaced the old battery terminals with new clamp style that have extra places for my Rops light. Then went to restart the tractor, all I got was...

thank you for you input

Thank you!

Thank you Sir. I should have made the original post plainer. The help on this blog is real. thanks again

Mx540 has a switch on the right side. When mowing or blowing snow when I lift that switch and start backing the implement keeps working

Sorry, I thought I put that in there. It's a mahindra 2538 hst open station, also the best oil for the Drive train in your opinion, any help is greatly appreciated

Ordered the filters today, but wasn't sure of the fuel filter. They had a bunch. From what I read my 2538 has two for it so I've got to look at and locate the second one. Did not know there are two.

Duffer gave me the numbers for Wix filters I think I got all except for the fuel filters. Does anyone have that Wix number. Thanks in advance the know how among you folks is amazing

Thank you for you help, now the only one I need is the fuel filter. Hopefully there is someone out there that has a number for that. Thanks again Duffer!

Does anyone have to part # for the WIX oil filter on a Mahindra 2538 hst open station? Thanks in advance for your help!

Well my thought is to use a fender mount radio as no cab. I think there is room to do that. Thanks for your help.

Does anyone know if there are radio wires from the factory on the open station 2538. I know they are on the cab models, not sure on open station. Thanks in advance!