Search results

Cut off the center off the glow plugs. Built up with mig weld and welded a 1/2 nut on. Few heat sessions with a big torch and the other 2 came out. Bought an easy out kit but didnt want to deal with shavings. The heat from the mig helped loosen things up. It was a small mig so nothing actually...

Soaked for a week with atf and kerosene. Dont think did much. Hit with a bigger torch today. 2 let go and came out. Both had no resistance on ohm meter yet with a battery charger both started to glow after 10 seconds. The new ones had around 1ohm resistance. The bad news 2 twisted off.

Yup did that a few times day 1. Once hot sprayed pb blaster and pl100. Surprisingly how half way of temp guage isnt really that hot. Could touch the head easily still. Warmed with small torch atleast 6 times.tried using cold water to shock it. Nada I soaked them with atf and kerosene twice...

So this 1547 im sure has the original 2008 glowplugs still in it. I have soaked them with pb blaster,pl100, diesel fuel,tried wax trick and done heat cycles with a small hand held torch over 48 hrs. These things are welded. About 1mm of scaly rust has come Off since the soaking started. Tried...

Hello all Bought a used lenar 69 inch flail mower. I sharpened the Y blades on it. Still doesnt seem to do that great of a job. Often gets tangled up with long green weeds. I noticed lots of flail mowers the blades are hanging from a C chain link. On mine the 2 blades are bolted together on the...

Air filter is clean Oil has 10hrs and its full and clear like out of the jug. The glowplugs can barely be seen. Im guessing fuel tank and air intake needs to come off to access them. Almoat looks like injection pump has been off before. Im wondering if the pump timing maybe slightly off. In...

Hello im here with yet another question. I dont see in manual where it says how long of a glow plug cycle is required. My brother inlaws kioti when you turn it to glow stage on key and hold it the light in dash will go out on its own. This 1547 seems to be cold blooded belchs blue on cold...

Yup its 4wd and still had to crawl with bucket.

thanks As it has R4 on it im trying to figure out what the equivalent stock size R1 would be. Cant seem to find any info as to what stock R1 size for it would be.

Hello Tried an old 8 foot wide tow behind disc harrow with 2 rows on my cabbed 1547 hst 4wd with R4 that have seen better days that have calcium in them. Have 18 acres to turn over. Maybe im expecting too much from it. But anymore than 4 inches of soft terrain and its stuck. Had to use the...

Good to know thanks. What model tractor do you have?

Hello 1900hrs on my 08 1547 had all new engine oil filter trans fluid and filters. He out April tdh in it. I see it says meets some massey specs. Started it hot was on a slight incline in high range and when i went to take off it had a delay. Got to checking fluid and it maybe down a little...

Is there 4 rows of disks or just two? What would a set up like that weigh?

First time i seen an old timer with those big wheels. Nice Thanks

Base stock yes is all the same. 3 parts to an oil. 1 outnof 3 parts is same. The additive package and detergents are not.

Hello all have a 1547 massey hst 47hp 4wd Industrial tires (rears are full) supposedly 36hp st wheels. How wide of a disc can i pull? Or how big of a 3 point disc can i hang?Land has wet spots and a bit of incline in spots. It has left over corn stocks. From what i see a pull disc is better for...

Once i engaged the heel lever for diff lock climbed right out. As assumed what i thought was diff lock is cruise lol. No wonder it didn't move the wheels i set at idle doh. Anyone know the idle spec? Thanks

I find the levers on this thing misleading. What one would think pushing lever forward showing front tires going forward being 4wd isnt. The lever has to be twoards the back. Looking at it i guess when forward the front tire is not solid black but white i guess meaning no power. And under this...

Hello i have a new to me 2008 1547 hst cabbed unit 1900hrs on worn industrial tires. Owner changed the hydraulic fluid put in April brand tdh recently before selling. Changed all filters except 1 gave me the new one as was backordered. I got it stuck in the mud (rookie) wet sawd actually. Got...