Search results

Like i said in my other posts, i measured the seal i got and ordered 2 of the exact same design and size on Ebay and have them on hand. I will keep in stock until i need , if ever. Or maybe one of my friends will need one. So does not matter to me.

Yes, it works great. It was the filter plugged up . Cleaned it and works great. Yes on the parts being hard to find. That seal is very expensive and the dealers who still have it have jacked the price up so high it is insane. Greed has is out of hand. So after i paid high dollar i got it and...

Yes, i figured that would happen so i took pics of it before i took it apart. But my problem was the filter was completely clogged. Never even thought that would happen.

Yes, see my previous confession. Well, my next project on the 1210 is the front wheel drive, it does not work. I believe the rear U Joint is broken as the shaft just wobbles around in the case. I have seen a video of how to do it. Time consuming but concerned about getting parts for it. I dont...

Just to let you know about that filter i THOUGHT was paper. Turned out it was just coated with a jelly like material that looked like cardboard. It actually is metal and i dont know why it was all twisted out of shape. Maybe previous owner got a little rough with it. Anyway, i will clean it up...

Yeah, its kinda like the headlight plastic that fails at about 5 years. Why?

WOW, thats amazing how it cleaned up. Mine is in far worse shape. It is made of PAPER and it twisted out of shape, like somebody has tried that before. Gonna give it a shot anyway. That INLINE filter is a great idea and i may just try/do that. Thanks for the pics. BTW i just now put the cap back...

Ut oh. Thats not good. So i guess the filters are like the seal, none made anymore? I found , after i paid high dollar for one, the size of the seal and you can find them on Ebay for way less than $10 dollars. I simply measured the high dollar one and recorded it and looked on Ebay and they are...

OK, now i have another problem. I pulled the input filter and was trying to find a new one. I used this number SBA340500340 and there in none to be had, anywhere. So what do i do now? Do you have a source for an alternative filter? I think the old one is too far gone to cleanup and reuse. Fould...

Just wanted to mention this as added info: when i pulled the head and piston out , the sleeve stayed in. I pulled the piston with a magnet and was difficult to get out even with the bad seal. I tried to get the sleeve out by wiggling it and it wont budge. Is it possible the sleeve has expanded...

Great information. Yes, oil did come out that hole you indicated, and was turning motor with starter. Was pretty good stream. The seal was installed exactly like the pic you sent above. I pulled the screen and the screen was dirty but not so much that oil was totally restricted. Will find a new...

I do not have one but guess i have to buy one. What should the pressure be? When i had the head off i turned the engine over with the starter and fluid was pouring out. Just turning over with the starter and not starting it so figured it was good to go. Wrong assumption apparently. Will get back...

Ok thanks, gonna do that as soon as the rain lets up here in Houston area. Been raining everyday for a week. LOL

Those seals are good for about 30 years and then they seem to just disintegrate, LOL. AM going to look at the pump today and maybe change the fluid out as well. Hoping the filter is just plugged up and not the pump broke. Maybe i can use an alternative fluid, gonna check it out.

Thanks for the input. Yes, i installed that seal exactly as you show it in the pic above. It did fit tight and i agree removing it would be a expensive mistake. I just can not understand why it wont lift now. It was working before i tore it down, it just would not stay up. Now it wont even...

Hello all. I am new here but been reading all about some of the problems with this Ford and all have been helpful in solving some issues. Very informative. However, i have a problem with my Ford 1210 Lift. It wont lift up. A little background here. I inherited this machine and it starts and...