Search results

Is the fuel gauge showing past full with key ON? If so it may have an open in the wiring. For the Temp you might check to find the sender and examine connection. I have a 2009 EX2900 (550 hrs) that gets stored inside. All my gauges work. Good tractor. I would like a removable front loader...

Just keeping all on the same thread. I added 2 stabilizers and removed the oe top link all together - vacant. That piece of oak kept the half inch drill with 3/4" bit from breaking my arms anything on my arms. Next time all mounts would be on the added ROPS arm. There would be 3 sets of...

Poison ivy - if it touches me I get it. I used to be on a plow crew and line crew and we have plenty of it in southern Ohio. Besides not touching it either with skin or touching infected clothing, I suggest taking a bottle of Dawn with you to coat an area of your skin you may have encountered...

I relieved all weight from the tractor oe top link. I bolted the crossbar which is bolted both sides to the lift arms 1/2 inch bolts to the drawbar 5/8 inch bolt. The BH weight is on the drawbar and the lift arms. Jacks and hoe will lift the rear of the tractor off the ground. To remove BH...

Completed. With the new top link, I took all the weight off the lower tractor top link mount then I put some back on maybe a third. The new crossbar is offset to allow full rear adjustment of the seat and sitting flexing back.

Agree, it would be nice to be able to reach the throttle. I can reach putting it in gear or neutral on mine. I do not have a chance on the brake/lock. A shuttle or a crowd would be nice. I pretty well, with my wants, described a 310 John Deere. 8-)

I do not have a subframe with my Yanmar. Here is my progress, awaiting paint to dry. I have 2 - 1/2 inch threaded holes to complete before mounting it.

The ROPS was used for the additional mounts in pic 1. Helpful pics. cool

In a "Hydraulics" thread another member brought up the possibility of damaging the tractor top link mount because of stresses of a 3-point backhoe on a compact tractor. I do not dispute that possibility. I do rest most of the backhoe weight on the drawbar of my EX2900 which relieves some...

First, er ummm couldn't wait until tomorrow to retry the PB loop. It works. I must not have actually reversed it the first time it did not work. thanks Second, I did a lot of reading from TractorByNet and others on the pros/cons of a 3-point backhoe. I understand there are no guarantees...

Ok, well did that but I will try it again. So, you are saying the BH is open center but one way with the check valve? I will try tomorrow and get back.

As you suspect it only works one way.

As you suspect it only works one way.

Hi, I expect most new members join because of a question - me. I have a 2009 - bought new-- Cub Cadet EX2900 with power beyond of which I run 2 sets of remote hookups run off the wobble stick. I do use the loop connection for my Bush Hog log splitter. I suspect that the LW6A backhoe has a...