Search results

This is the belt that John deer gave me. I thought It did feel tight when I first put it on. But now its loose. But that's going off of my memory which isnt all that great ...

Thank you ! I have tried no load and Load on the pto manytimes. I also have taken the pto off to check everything out.. the deck itself spins no problem. When its off I can roate it by the drive belt. Also, after I run it and shut it off I have felt every spindle and idler arm to see if anyone...

I will check the belt tomorrow. If I remember right it has the part number on it.. the deck turns just fine. The big thing is the pto that makes the noise. Because that is also how the old one sounded before I changed it....

I did get one for the lx277 with the 48" deck. They did give me the right deck belt. But that doesn't mean that they gave me the right one.. I will take it off tomorrow to measure. If I remember right it does have the part number on it. But my big concern is the pto..

It also made the same noise with the old pto. I have taken the clutch off 3 times so far. I also felt the clutch after I shut it off. Plus before I put the new clutch back on I ran the tractor for a while then I checked the main shaft to see if it was hot. Which would tell me somewhat if the...

To be honest it dont remember the part number on the belt.. I thought that I compared it to the old one and they where the same...however, I'm not sure if I did it on that belt or not... I know that I did it on one of them.

The pto is a switch and I just put in a new oem switch..as for the paint..you are correct. That happened before I leveled the deck and I did have the deck up at the time...

So here is the update. I put the deck back on and trippled check everything.. the deck soes move freely if I pull it by the drive belt.. I had put a brand-new oem deck drive belt on it and now its way to loose after trying to engage the decknall these times. Stupid question. Would the belt...

Not that I could see..

Thanks everyone. Sorry I didnt get back sooner. Everything on the deck is 100% new. All new spindles. Greased properly. New main drive belt, brand new deck belt and brand new deck drive belt. I had picked up a new steering drag link today and then I will install the deck once again. I can...

The slack on the deck drive belt..

Greetings..I will keep this as short as possible. which is pretty much impossible for me.. Anyways, I have a JD LX 277 that I bought new many years ago. I always have kept up on maintenance on it and other repairs. But this time it was due for the make over.. I rebuilt the carb, adj lifters and...