Search results

I got this for free and was told it ran and in the process of getting battery cables for it. It has an 11hp briggs and I cannot tell anything from it except for the name on the plastic. It is a Canadiana by Par/Noma Park 2002 11E and I would like to find a manual or something on it. Anyone got...

I am looking into a four wheeler for around the farm, property and could use the 3pt and PTO for other things. Just wanting to know if anyone has one and what you do with it. Pictures ! Pictures! thanks, Bill

I am looking at a 1250 model I think. It is hydro and only has a trailer hitch plate on the rear. What is available to add a sleeve hitch or Cat 0 3pt with a manual/electric lift to the tractor. I can get if for a good price and it is in above average cond. 12 hp Kohler motor. any ideas or...

I finally got it finished and thought I would post the pics for anyone that may be wanting to do the same. You could use this for the garden, cleaning equipment in the field, cleaning cows( my father already wants to borrow it for that) and anything else you may think of. I bought the pump off...

I have an A frame for my 3pt and looked at the Hillers sold on agrisupply and wondering how do you attach them? I dont' need the Kuealtor?? holder and wondering how to attach them to a vertical flat bar? U bolts? anyone done this? Post pics if you have them. I will add a picture of my A frame...

I have a Hanson PTO water pump and trying to find out the GPM flow of it. I want to use is with a 55 gallon drum to keep water on my pumpkins as it is dry as a bone here in E Tn. It has 7/8" threaded in/out holes and I want to put a regular 5/8 garden hose on it with a faucet on the barrell...

I found a belly mower off of a YM186 that uses the large pulley instead of the 3pt driveline and curious if it will fit my YM1700? Does it still lift from the 3pt arms? It has chains on the front also, looks like. He is emailing me more pictures today. Bill

I finally got the woodshed finished and all the wood stacked from 4 different piles/stacks that I had covered with plastic. It is so nice to have it all in one place. It is 12 x 17 and now I can get my Yanny out of the garage and into his own home. The sides are 1 inch roughcut white oak and the...

I know this is a Bobcat attachment but I couldn't resist posting. I took these this past spring as we had to Rock hound our garden for the second time! I swear, we grow more rocks than anything. Here are some before after pics. Every spring my neighbor gets a rock hound for a contract job and...

Look to the left of the left lift arm. There is a short spring loaded lever with a black knob on it that cams back and forth in the bracket. What is this for? Bill

I am still stuck on this belly mower option for my Yanmar 1700. I figured I might get some more response on the attachments so I put it here. I have searched and searched trying to figure if I want to invest in a belly mower or RFM. I know that Continental made some belly mowers and you can...

I hogged almost 2 acres today at 4pm and the temp was 96 here in Tenn. No problems except for my hot butt on the seat. LOL The 1700 and 4ft JD hog did the job on our rental property accross the road. My wife took these pictures on digital camera and you can see the heat/muggy foreground quality...

Are they any good? Who sells them? Bill

What do most use on the compacts? I have a Yanmar YM1700 and found one of the quick release ones for about $68 or one of the type that you have to drive the pin into for about $40. I would assume that since the tractor does not have live PTO that once you put it on it would stay on for all PTO...

Anyone use a quick-hitch? I found one at a garage sale yesterday for $20 and got it put on my 3pt and in looking at how the attachment goes there is not a place to hook the top. I have the top link on and both arms attached like normal. On the back of the top section there are like 8 - 1/2"...

Well I thought I had it figured out and was going to find a set of the 24 wheels for my YM1700 and get a set of turf tires to mow with. Geez, for a R3 turf tire for the 24 is $268.00 each! What other options are there for lug pattern/wheel packages? Would I be better to find a set of Yanmar...

Where can I get a fuel cap with the float gauge for a YM1700? I found a part number I think on the web of TC-4145 but not other pricing information. thanks, Bill

We have a JD 950 1980 model and the fuel gauge float type is broken. Where can you get a replacement? Local JD dealer looks at me like an Idiot and wants me to bring the original one in and he looked it up and said it only had a cap. I have been to both Deere dealers here and they have been...

Anyone use a belly mowe on a YM? and if so what size can a 1700 handle? 60" or so? Are NEW aftermarket units available any longer or should I just be looking at a good quality finish mower? Anyone have information on mfg that I could look at different options? Bill

I finally got all the little extras done on the 1700 and figured I would just share a couple of pics. I have had it for about 5 weeks now and put about 6 hrs time on it and really like the size/power of it. Sorry, I just like posting pics. Bill

Anyone know the NAPA fuel,air,oil filter numbers for JD 950? 1980 model. Manual does not give any #'s but JD. Also what is trans/hyd capacity? 19 qts? thanks. Bill

I am looking for a set of rear 24 wheels for a YM1700 to put some turf tires on. Anyone have a set? I am in E. Tn area. Bill

$8200 for a L3430HSTC with loader? Anyone know this user? It is listed in the classifeds on here. Is he a member here. I am not sure about the price on these Kubota's but this sounds low. Bill

Will a 2850 with FEL lift a 500 lb round bale to stack them? We are looking for another tractor and found this one. Owner says that he lifted 4ft round bales with it. thanks, Bill

My father is now looking for a smaller tractor with a FEL that can lift/stack 500lb round bales. What would be the correct size Yanmar to do this? Also, does he need 4wd? thanks, Bill

Well I was under my tractor last night that I just got a week ago and looking at location of everything and notice oil starting to drip of the bottom of the bellhousing. I removed the npt water drain plug and about an ounce of oil ran out! I assume this is a rear seal leak basically the same as...

I checked the dipstick beside the shifter on the YM1700 and it is about 3/4 inch above the XXXXX on the stick. Could this be the cause? It was recently changed and I think too much was refilled causing the leaking. Also my RRear axle seal drips a couple of drops at night after using. Should...

Well I told you guys that I was coming home with a tractor yesterday. After 511 miles round trip I put the YM1700 in the garage last night at 11:30pm I only have a couple of pics for now but will get more soon. I got a new set of decals, can or green paint and a manual. The decals on it are...

I am going to Tullahoma to buy a Yanmar tomorrow and just wanted everyone/anyone's opinion on what you would buy between the two YM models. Is the YM1700 seating area larger? Is the 3hp worth $500 more ? I am 6'4" about 230lbs so space is a factor. I have sat on a 1500 and the foot room seems...

I need cash and selling the 3 pt Agri-fab aerator 48" wide. It is CatI but you could change pins to Cat0. It weights about 90 lbs. It pulls about a 2 in plug and works great. Used it 4 times since Nov last year. I paid $399+$60 shipping + tax. I will take $350 for it shipped ground to you. I...

I called and they seem like nice guys. Just trying to get info on some Yanmar models. Bill

I am finding info on the 1700 but none on the 1600. What are dimension diff? does 1600 have water pump or retro fit? thanks. Bill

Anyone else have the problem with the clutch pedal on the yanmar 1500 being too close in? Is there a way to move it to the left about 3 inches? also, any modifications to the fenders where they mount on the footboards? Mine seem to extend about 3 inches foward and keep hanging my foot. any...

I just bought a Yanmar 1500 but not picked it up yet. It has a 6 spline PTO and I am just wanting information about about the tractor. Are they a good performer? Anyone have trouble finding normal AG rear tires? I think this one has 22 inch on it. If someone can verify that. What are the pro's...

Well, I have had the resto done for a while now but been busy using the tractor so here are a couple more pics of it finished. I am actually considering selling/trading this for a little larger model now as we have more area to bushhog and need something a little larger to handle the 5 ft BH...

I cannot find any specs on this tractor. I found one locally and He states it is a L186 but only find L185 info on tractordata.com. Any suggestions? Anyone have one of these that could give me more info? Is it a grey market? does is have standard PTO? I know it is a 2cyl diesel but how many...

I have a PTO shaft on my 3pt spreader that is froze up. It will not slide in/out and I cannot remove it from the gearbox either. What is a good method to pull it apart to clean/lube to slide properly? I have tried PB blaster, heat, banging, slammer etc and it will not budge. I thought if I had a...

Before: After: Bill

I am in the process of semi-restoring a Mitsubishi MT372 ( as you probably have seen pics here ) and before removing the wiring harness the glow plugs were working fine. I installed a new ignition switch ( 5 prong w/preheat Kubota switch ) and it would turn over but not glow plug. So, I put the...

I am in the process of semi-restoring a Mitsubishi MT372 and before removing the wiring harness the glow plugs were working fine. I installed a new ignition switch ( 5 prong w/preheat Kubota ) and it would turn over but not glow plug. So, I put the old switch back on that worked before ( reason...

My fuel valve is frozen and looks like the bowl has a hairline crack. Where can you buy new filter assemblies at? Bill

Smart Farmer 324.99 and exactly what I needed! Bill

Here are a couple more pics of the MT372 that I have. I am almost to a completion and now it is just assembling everything back. As you can tell, I like pictures and I know that they have helped me several times seeing others so I post a lot of mine. Bill

I was looking at the homemade cultivator thread and decided to post this also. NOTE: I am not an artist but tried to show what I was explaining. This is a Farm Pro cultivator and has removable tines with bolts on the supporting arms. I want to add a piece of 1 1/4 square tubing to the bottom on...

Anyone with a smaller Compact Kubota know what the lug pattern and wheel center hole size is? I am looking for an extra set of AG tires/wheels for my mitsu and mine are 6 lug measuring 4 1/2 in accross bolt hole to bolt hole and a 3 1/2 in center hole. Kubota wheel/tire combos are mainly what I...

What are the pieces called that bolt the two pieces of track together? My neighbor found 4 of them on the side of the road and gave me two. They weight approx. 60lb each and have 6 large bolt holes in them. I need to know what is the best way to cut them each into 3 pieces to make front weights...

I am going to buy a disc this week and wanting to know if anyone has use either of these type and what the outcome was. I have a Mitsu MT372 15hp Compact and want to pull my garden a couple times a year and rough up/smooth some bare spots in my yard for re-seeding. Any opionions would be...

I have a Mitsubishi MT372 and looking for a steering wheel replacement and was directed to you guys for help. I need a 15.6mm or 5/8" taper shaft size with 36 splines. Can someone who has a Mah 15 series check their steering wheel to see what the dims are? I desperately need a steering wheel and...

I am looking to see what size Kubota steering wheels are. I am looking for a 5/8" or 15.6mm tapered shaft with 36 splines. Anyone know what size they have and where to get steering wheels from? I have a Mitsubishi and cannot find squat for a replacement wheel. Any help would be appreciated...

I am looking to see what size Kubota steering wheels are. I am looking for a 5/8" or 15.6mm tapered shaft with 36 splines. Anyone know what size they have and where to get steering wheels from? I have a Mitsubishi and cannot find squat for a replacement wheel. Any help would be appreciated...

I have an A frame for my Cat I lift but just wondering if anyone makes a kit or has pictures of something to adapt to accept a Sleeve hitch hookup? Reason I ask is, my neighbor down the road a 5 or 6 different attachments that I could use if I had a sleeve hitch. Any ideas? thanks, Bill

Previous owner decided to spray paint the wheels and got overspray on the inside of the rear tires. I removed the tires, sandblasted and re-painted the wheels and getting ready to put the tires back on painted rims. What is the best way/cleaner to use to remove it before I put the tires back...

I took my 3 lug front 8" Mits MT372 wheels to Co-op yesterday and when they were breaking the bead down the wheel cracked/broke in several spots around the lug holes and is trash now. It was very rusty where someone had liquid in side it with no tube apparently. My other wheel is semi-ok with...

I have a Mitsubishi but looking for a universal decal kit of some sort for all the control levers, safety, dash, etc. Any ideas? thanks, Bill

I talked to Valley Power yesterday and he does not have any of the 3 bolt 9inch front wheels for Mits. Does anyone have a set laying around? I want to change from the 18x700x8 to a 400-9 rib tire like came on the Beaver I think. thanks, Bill

I have two bad tubes in my rear tires and was planning on removing the tires and sandblasting/painting the wheels and put new tubes in. As of now my right tire has fluid in it but it is leaking at the tube valve stem. The left tire does not have fluid in it. do I need to to add fluid back to...

Man, you guys have to get some of this stuff for degreasing. My Mits had caked diesel fuel from 20 years on it and I used Gunk foamy engine cleaner, simple green and neither one worked well. I then went to Auto Zone and bought a purple bottle of biodegradable degreaser cleaner( not purple power)...

I am looking to drill/tap some M12 bolt holes on the hub of my Mits and wondering if I were going to drill/tap for a 1/2" bolt what size drill bit to use? Reason I am drilling is 4 of the 6 are already crossed. looks like someone tried already to use a standard bolt on Metric threads. Also...

Hello all. I am stipping down the 372 for new chassis paint and while I have it apart trying to figure a few things out. 1. I have a block heater installed in the freeze plug but no cord. Where can you get a cord? It is a 3 prong curve plug. 2. Steering is sloppy. I don't see an adjustment...

I am going to be attempting to weld 1/8" thick 2in square tubing to flat surface and then welding a 2 1/4" flat bar stock that is 1/4 thick on the ends. Will a Mig welder handle this? Or should I let someone stick weld it? I am taking a cat O plow and making it into a cat I by beefing the arms...

I am entertaining the thought at this moment. He is the situation. I bought the MT372 2wd tractor and now torn it down to chassis and re-painting hood/fenders and other things along with the chassis. I really want to use this thing a lot so I am thinking of different attachments and projects I...

I just drained my fluid and when I pulled the screen out it was damaged. Is there a NAPA part number to buy locally or is it an item I have to get from dealer? thanks, Bill

I found this Sears Suburban Cat 0 plow for practically pennies and wanting to cut the small lower pin/arms off and add square stock to 26"wide for Cat I hookup. The plow is about the same size as a normal 10" plow in good condition. Any ideas or anyone done something like this? I just...

Who uses the Agri-Fab 3 pt attachments? I am looking at their single disc and the plug aerator. any feedback? Can you special order them at Sears? Who is the best distributor to buy them from? thanks, Bill

Where do you get replacement front wheels for Mitsu's? I want to go with a 3 inch wide 18-20" tall medium rib tire. I have never seen 3 bolt wheels before. Bill

Wanting to replace the warped/black dry rotted steering wheel on my MT372. Are all the Mitsu center steering wheel shafts universal? Is a puller necessary to remove the wheel? thanks, Bill

I bought a sears suburban single plow in great shape for $25 and want to put the 3pt pins to Cat I.. What is the measurement off center for the plow in correspondance to the right wheel? It should not matter what width tractor and I feel it should remain in the center and I can just make new...

Anyone ever seen a kit or muffler for a vertical exhaust on Mistubishi MT72 or any other Mitsu. Beaver, Bison etc. I am really not crazy about the foward facing and wonder if there is a vertical stack type available. thanks, Bill

Reason asking, I have a CUT with a 540 PTO and found a JD tiller and want to know if my diesel will have enough rpm's to turn the specified gas rpm's required for 540 gearing. Does anyone know what Rpms the gas engines turn on a JD to get the 540 pto speed? Also, does anyone know what rpm's...

I am really looking for some type of tiller about 44-48 inches to adapt for my 3pt with PTO. Anyone have any ideas of mfg. that made these and what rpms they are designed to run at? Pictures would be great. Bill

Does anyone use this type/brand aerator? 40 inches wide w/ 3 inch penetration plugs. I saw one at HDepot yesterday and want to fab/add a 3pt hookup to it and pour a concrete weight on top of the frame for weight. Anyone use this type? Does it pull pretty good plugs? It states 3 in penetration...

Anyone have any idea about the PTO shaft? Does it run CCWise? I know it is a finer shaft but need to know about what direction it runs. I have found a four wheel driver 1300FD model with plow,disc and finish mower. Is the 1300 4wd a Cat I or 0? If it does, are there CCW tillers or bushhogs...

I found this tiller in really good shape for a good deal. It is approx 38 inches wide and measrures about 14 1/2" on the inside of the bottom A. Has anyone adapted this type of Cat O attachment to a regular Cat I? I would figure it could be done and have an offset to hide tire tracks. It is PTO...

I am going to be adding a front guard/grill with weight and wanting to see ideas or mfg's of some. Just something simple like a downsized Ford 3000 guard and add weights. Any ideas? I have a 100lb chunk now. Bill

Are these available from anyone? Does someone have a set that we could get made somewhere? Or a good set on their tractor that could be copied? Both of mine are faded badly and when I redo the hood / fenders the new decals would look nice. Bill

It looks like it is but just wondering. Are hood decals available? I found a paint to match today but not going to paint if I cannot get decals. Bill

Hello all, I am the newbie here. I just bought a MT372 and have a couple of questions maybe someone here can assist me with. It is the US version with the 6spline clockwise PTO shaft with 2cyl diesel. I plan on getting some manuals on it for sure. We also have two Ford 3000D on our farm but I...