Search results

GS 2310 Loose Steering Wheel Is there a easy fix for this Problem I have looked and found oil on the rubber washers and have loosened one and filled in with metal washers wheel is now solid again But what else will go because of this fix DO NOT use the wheel for a handle??

I need advice on a new battery mine is 7 years old and I have to Jump start the tractor every time I want to use it. Ideas on the best I can get Help

I am having problms with how meany times I have to click on a item to get it to move I always have to click twice and it is only happening On this BB. am i the only one??/

I am looking for a free drawing program I am wanting to draw out lines of a building and roofs and am wanting some thing easy not a $ 399 program Your help is needed

I would like to know if it is at all possible to set up a SKYPE account and use it For my land line and could it also be set to cross over to a verizon account??? Just think of the money that could be save if at all possible Just a though ??????? DougM

I have a GC 2310 and the Hyd Cylinders on the front end loader needs to be repacked. I was quoted at $ 100.00 per Cylinder I have now idea how to do this?? I could use a LOT of help on this?? DougM

I have a Gas line in my back yard but not sure just where It is plastic line how to find it with out braeking the line ??? Help

I have two 3 ton floor jacks and both are leaking. Seems to be around the pump pin on the handle any ideas please. Thanks

I am in the middle of trying to build a BBQ Smoker on a trailer. and I would like to put a rotisserie in it. Problem being ( money ) I am looking for a gear reducer so that I can use a 1/8 horse power electric motor I would like the rotisserie to run at about 1 rpm per min Any idea痴 on how...

Black & Decker Heavy-Duty 36-Volt Cordless Electric String Trimmer #NST2036 I would like to know if this battery operated Weed whip is any good before I spend the Money ?? Has any one had any operating time with it ?? DougM

I would like to know if there is any way to get CNN CNBC newa programs on my computer ?? Help

LiveLeak.com - Snowmobile of 1926 -- SO AWESOME I have never seen this before

I miss post made by Wroughtn harv Where is he now

I would like to know if any one has ever had or used a MF 2330 Rotary Broom?? I have a long drive and I have Bricks in it and some times when using the Mf2340 I flip out bricks and have to stop and re set them and some times it is not very easy to do ... So has any one ever used a...

Question I am getting a error message of 0x62304390 when I close out internet explore 6.. Help Please DougM

Has any one made a backing plate so that you could make connections to the back hoe on a 2310 easyier??? Pull back push forward with a small quick disconet is not that easy to do. I now have 300 hrs on it and am very happy with it ........ DougM

I live in Northeast Ohio And it is still snowing Soon there will be NO place to push it to I have turf tires and they work great I though I may have needed chains but not so... I have the 2340 hyd blade and it is soo nice to just be able to change the angle of the blade with just one...

I had the pleasure of going to the Power Show in Columbus, Ohio.. It will be running all of this Week end DougM

Other Uses I have found a new Gadget.......... Swift Hitch it is a small camera that is attached to ur rear bumper that alows u to see ur trailer hitch Some thing new may be of use to some one DougM

How does one set the time on the bb to go with my local time.. I live in the State of Ohio (when I am not lost ) DougM

I do not know where to post this at ????? It seems that this Web site has slowed way down ( loading ) I am not having problms with any other Site's Any idea as to what MY problm is ??? DougM

support-ML-819871-ML-

Looking for some place to find trailer building plans Went to the libray and could not find any thing Could some one help with a web site (FREE) or to email plans to me DougM

I was at a auction on Friday and I bought 5 talbes 48 x 96 by 3/4 in plate steel .... We loaded them on trailer with a small lift truck, stacking the tables 3 high up side down and sandwiched in .. drove the load home going 40 miles per hour .. trip was 80 miles... Got home and the only thing...

I was at the Randolph Fair on Sat. and I purchased a MF 2340 for my GC 2310.. Front quick adpterplate and the Blade was $ 1500.00 Is this a Good price ???/ Cost of Attachments just keep adding on and on and on . DougM

I have a GC 2310 with a MMM.. I would like to know if there is any EASY way to attach the pto.. It is very hard for me to pull back on the ring and then push forward while holding the ring back.. DougM

 In the past history of our country one of the most basic things has been home owner ship Now that has been changed by Judges that have lost contact with the people Most of us would say that if they come to my door and tell me to move I will fight them BUT we all know...

I have a 60 MMM mower and would like to know if any one has ever moved the Back set of wheels Back about 2 in. I think this would let the wheels rotate 360 deg and make the changing of the deck a lot easier??/ this is for a GC2310.. DougM

Does any one have a MF 2340 Heavy Duty Blade.. This is for a GC 2310. I would like to see one so i could COPY it.. Best price I can find for this set up is $ 1,500.00 With a little help my be it can be made for LESS. DougM

I only have 220 single phase in the garage ?? 100 amps…service I would like to know how Large of a MIG welder one can Get that will run on single phase 220 volts ?? DougM

I am trying to change my GC 2310 front loader hock up to a skid steer and the only thing I can find is from a company called Kasco and I have been given a Price of $ 1000 for the change over Would some one give me names of other company’s ...... I can change a lot of pins for that kind of...

I would like to know if some one could PM me with prices of Mf 2340 Heavy Duty Blade ( 60 in ) Front Quick Hitch System I would like to have a front snow blade on my gc 2310 I have been to two deelers???/ one told me I did not want these as they cost to much the other told me they would...

Idea\'s wanted <font color="brown"> &#65279;I have a GC 2310 and would like to find OR make a snow plow that would fit on the front buck and attack some thing like the tooth bar.. Also would like for it to be adjustable from left to right manual would be fine. Any though’s or idea’s...

&#65279;My GC 2310 is now in the shop to be re paired The HST peddle feel a part the arm that is straight down on the pedal (underneath the floor pan ) had a bad weld lack off May be a good idea to look at ur’s DougM

How do I increase what my front end loader will pick up. Mine works fine it is just not strong enough.. GC 2310 MF any ideas as to where to make a adjust ment ?? Doug

There is a gas supply line that runs across my land and it was to be located here BUT it was located THERE and I ws digging a ditch buy my garage and now the is a orange gas line in two pcs where it was not to be .... Gas was about 140 lbs of presure I went to the supply line shut off valve and...

&#65279;Winter is coming soon. I have a GC 2310 with truff tires What type of ( if any ) Chains are needed?? DougM

Well I took the back hoe off of it last night and what was 10 min. turned into about 2 hrs.. So I said this can not be right so I took off the front end loader and about 1 1/2 latter it was off. Them I put the MMM on and what a night mare...... 4 hours total time for all of this I was Hot and...

I just got my GC 2310 back from the shop ... Had to have all most all the hyd lines re placed as they were dripping they were OVER tightend when new For now no more wet floor in the garage .. Had my front tires Foam filled also REALY like it. DougM

I have a CG2310 MF and would like to know Why there is a sight glass instead of a dip stick??/ Makes no sence to me ?? DougM

Well I have gotten to use my gc2310 backe hoe loader I have found a few leaks but other then that all is well.. NO MORE RAIN FOR SOME TIME ..... Doug M

Well on the GC2310 check ur seat as the bolts on the under side that ( HAD ) nuts on them are now gone.. Also have a slow air presure leak. Now tomake up my mind if I can find it Slim Or foam filled ?????? O I al so got it stuck in the MUD had to puch it out with the back...

Well I have gotten the massey numbers for mower blades I would like to have a spare set rdy. stamped on the blade is # 8654c I am told the massy numbers are 3606888m1 Cost of $ 20 per blade need 3 for a set.. LOOKING for a on line soruce for LESS costly.. DougM

On my 2310 the front wheels ,,would it be ok to drill holes in the hub in orer to mount wghts. ?? It's not like drilling in th ROP?? DougM

Wheel weight\'s Today I got the 2 in by 10 round plate 4 pcs and they are now in side of the hub's on the rear of my 2310 Each one weighed 40 lbs each Cost of scrap steel is now at .63 per lbs I will wait a while and see how these work and may be add more .. 70 deg's in Ohio to day MUD DougM

My new GC 2310 sets in the garage there is just too much mud out there . Get it dirty never DougM

Well I should get de livery to day and I have tryed to post pic before and they never get there as it is too big ?? I have a concord 1.3 megapixels I have re sized and re saved and nothing seems to work ??? So for now NO PIC<<<< trying ang DougM

Power Show\'s Any one know of dates for the power show's Doug M

I am looking for a rack of shelfs that looks like a xmas tree and truns with small compartments. Wanted so I can place all the nuts and bolts need for a garage. Where can this be found ???? Doug

Is it possable to place a RC72-27B or some other 72 " MMM on a BX22 ?? Doug

I have just finished putting up a ceiling in the garage New OSB board now to paint it. Color will be White But water base paint or oil ?? 30 x 48 ceiling. Doug

I have installed the tubing in the floor and now have all of the parts to do the plumbing. Closed sys. What brand or type of anti freeze should I use. Needed about 60 gal. Doug

test test

&#65279;I am building a garage 30x48 10 feet high I NEED HELP I am trying to determine the height of the cement floor. I have made the gravel grade measuring from the top of joist ( trust 3 ½ ) to the gravel and it measures 127 in. I am putting in 1 ½ blue board for insulation...

I am going to a auction on the 29th and there is a Davis back hoe there I have not seen it Would like to know if it will work with 3pt Want to know how much money to take with me any info would be of great help Doug

I am looking at a New Holland 1725 G 008470 tractor 56417 engine 2m18923 transmison 7308 loader 7500 back hoe 16 in. bucket looks to be in great shape Any Ideas of it's value ?? Wanting and looking for my first tractor Doug

Is it possible to put a 4-1 bucket on a BX22 ??