Search results

I have one of these I bought at least 10 years ago just because of the armor deck. It was heavy duty back then and still strong today but they are using much thinner metal in the body parts in the machines the build today. The less metal parts the better off so some of these zero turns with the...

I have had electric clutches on my mowers for the last 15 years and never had one go bad. Many are interchangeable so even if one did go bad you could find one pretty easily and cheaply. replacement is pretty simple and does not require motor removal. Most newer mowers over 2500 have an electric...

Milwaukee and Ryobi power tools...more than enough power for hand tools....my Milwaukee will break your wrist if you are not holding it properly. Batteries okay for small stuff....even long pole reach branch cutters. They will never replace larger gas engines for a long time...too heavy and...

Agree with above posts. I have pulled out four stumps with my Mahindra Max24...24B backhoe ..same as 1526B. Sometimes the stumps are taper and some have broad root systems. Last one I tried (pin oak) beat the hell out of me and my tractor. 3 foot trunk and I had a hole about 5 feet deep all...

I have 26 hours on my tractor (bought used with 2 hours on it) and decided to order filters since the 50 hour mark will hit soon once I start pulling more stumps. The filter prices are extremely high ...... I may go with OEM for the first change but was wondering if anyone has ever found...

My new Max 24 only came with one key...is it a standard key that can be bought at Tractor Supply or Walmart?

I bought a "new" 2016 Max 24 TLB (used 1.5 hours actually) from a dealer and there are no hydraulic end caps which seemed odd. Are all the hoses ISO 3/8? I need to buy caps and maybe hose covers before the ends get filthy. Like the tractor but these things should be included. I can color code...

I am looking at a used eMax22 and it appears to have the weld issue where the center rod connects to the bucket. I know some people received new buckets...this is a 2014 model and if I buy it can I get the loader bucket replaced for free or is the warranty on these tractors not...

Max22 3 point hitch question Do the small eMAX 22 and 25 tractors allow you to maintain downward force on the 3 point hitch? Example my old Chalmers 620 allowed me to move the hitch down and I could float it or hold it at a position applying pressure on the blade or rake behind it.. It could...

I am looking at a used EMax 22 (missed a nice Max 25 with loader for 9500 new!) and it has very low hours on it - high 20s. I believe it is a late 2014 model with the single piston for the front loader. Are there any known issues with this model and year? I thought there was a loader issue...

These are all basically the same size (length dimensions) with a front loaded. Has anyone placed one on a 10ft trailer (assume side and front rails and back swing gate) and managed to get it to fit without removing parts like the hitch arms? It would probably require angling the bucket but...

Need help..from knowledgeable Kubota engine rebuilders I have an Airman AX15-2U excavator with a Kubota D1105 engine. I need an engine gasket kit to put it back together after pulling the head - wanted to make sure everything looked good even thought cranking pressure reached 620lbs in each...

Anyone have one of these mini-excavators? I have an Airman AX15-2 and I am trying to determine if the mahine parts....like the pins are identical.. manuals /CD expensive to buy ...and may not be the right one! Thanks

Anyone have any manuals or parts book for this? If so I would like to obtain a copy. I will pay for all shipping to and from (I'll give a deposit too if you're worried) and create a PDF file of the manuals for myself and you in return. I can no longer buy the manual from the company. Thanks

I recently bought a small mini-excavator. Cheap and everything appears to work but I have too much slop in the 18" bucket...pins are worn and they were not greased properly. I'm in NY..anyone know of a good machine shop in the neighboring area or states that works on replacement pins and...

I've been looking at the models and like the turfs on the 2x20 (very flat and wide) but noticed that the 3030 has a completely different style with more of an oval shape (bowed out in the center of the tread). This is the only turf style I have seen on all the 3030s so far. Are the B7800s using...

I'm shopping around for quotes, local and distant, on a 2920 TLB and wondering what the best % discount or price I should be able to get close to for a TLB setup (maybe a 54" MMM too if the total package isn't bad.) Options like a tiller I can get locally from TSC, AG or Northern pretty cheap...

I am trying to really decide what the heck I want and everytime I think I made up my mind I notice some problems or negatives of each model...not just Kubota but Mahindras and Deeres. Now that people have had the 29/2620 models for a time, what are the dislikes that users are experiencing. One...

What's the process used to buy a tractor out of state with regards to sales tax? If it is purchased by an out of state person does it physically have to be delivered across the state border to avoid paying the sales tax? I realize that if one is bought directly from Delaware or New Hampshire...

The seat on the B2X20 models appears to rotate 180 when the factory backhoe is installed. If I ordered a B2920 without the factory backhoe, do I get the same exact seat arrangement (for possibly adding a backhoe later) or do they install a cheaper seat mounting mechanism? When I looked at some...

Here are some of my notes comparing the smaller Mahindras to the new Kubota B2620. I thought I had my mine made up and was leaning towards the Mahindra 2015/2710 combo until I talked to a Mahindra mechanic/dealer (same person) who explained why that combo was not the best setup. His comments...

I have looked at a few used 2015 HSTs without FEL or BH. If I purchased a used 2015 and bought a new FEL and Bhoe (2710), are there any options on the 2015 that I would have to also purchase that would not come with the attachment. By that I mean and hydraulic kits that the FEL or Bhoe would not...

I was at a Kubota dealer after hours comparing the B3030 to the B2x20 series and B2x. I thought the B3030 and B2x20 seats swiveled but that appears to only true on the B2x and BX series. For my 3/4 acre, those 60 inch buckets are just too large but the backhoe on the B2x20 is too small...not...

Where's pricing on the new 2x20 series (Northeastern area) ? Anyone have a link to a page that gives estimated pricing, even if it is MSRP. I am trying to get a feel for pricing with a FEL (standard versus upgraded model) and BH...and if they have a TLB setup with a price break. There shouldn't...

How is the performance of the 2710/3710 Backhoes for the 2015 and 2615 models? The specs seem to be somewhat misleading compared to other bhoes when comparing digging forces. The bkhoe looks massive but I was wondering how it really compares in PRICE and performance to the Woods B70/80 series. I...

I looked over the B2x20 series and was slightly disappointed that the backhoe wasn't a little bigger. Does Woods have a similar compact backhoe option available for this model in the 70 or 80 series? 6.5 feet is just a little to shallow for what I wanted.

Any advance knowledge of the new xx16 series coming out? I saw the 2816 - black paint - looked nicer - but was wondering what other models will be coming. I am curious as to any new models that will still support the 2710/3710 backhoe but with a little more power than the 2015...like a 2416 or...

Been comparing and studying the 2015 compared to the 18/24/26 models. Two different designs. The 2015 FEL actually looks like the hydraulic pin joints / stress loads are built with slightly thicker steel compared to the 18 and 24 even though the 2015 load specs are at best about the same as the...

Any ballpark figures for the 2015 and 1815 now with the FEL and BH option? ..without taxes?? I have a price in my mind of what I want it to be but think they may start pushing the prices up now. I have a real problem paying state tax on this..esp. in NY at more than 8.5% I really have no...

Since the 2015 backhoe seems to prevent the mid mower attachment without removing the subframe, can I assume that this is true of the 2615 model too? Both basically use the same backhoe so I assume the subframes are similar and probably the same clearance/access restrictions exists. I think...

I looked over the Mahindras and have some questions...looking for, HST, FEL and BKoe setup with the tractor and maybe adding a mid mower in a year or two. The 2015 HST looks nice although the FEL seems to be the weakest of the lot. The backhoe option on the 2015 seems to be the 2710 which...

If I buy a GC2300 (two years old) that has a mid PTO and rear PTO, what do I have to add to attach the FEL and BHoe options. Subframe needed or already on the GC2300?? Woods BH fit with simple bolt on attachments? FEL (OEM from MF) fit without adding extra stuff?? Thanks...I know it is...

Here's my scenario......is it worth trying to find a backhoe to fit this tractor(or buying new tractor!). Had this tractor since 1980 and it still works well..FEL, rake, blade 1974 Allis Chalmers Garden Tractor model 620, 2WD, 20 HP Onan with 600 FEL (48"), has hydro drive but only 2.25 GPM...