Search results

I was changing oil and filter on my 07 jd xuv 650, and poured about 2 1/2 quarts of oil in. Then I realized it needs only about 1 1/3 qt. I did run the engine for about 30 seconds to get the oil in the filter. Then I drained the excess to the proper level. Since then the xuv smokes from the...

I am planning to 1. add 2 rear remotes to get total 3, to control my 3 point (top link, side link and chisels on the box) 2. resolve the hydraulics to my AnBo grapple, 3. being able to connect my backhoe and splitter, the control valves are on the attachment. The 2007 JD4320 has one rear...

Here in NoID we need to pull small trees that grow on the roads, pastures, hayfield and places we do not want them. If you cut it low it leaves a small stump which is an annoyance for walking, driving and riding horses. We typically go with a tractor and choke chain attached to the loader, one...

When I switch my gauges to hours, something is blinking in the top right corner of the display. It looks like an hourglass picture. If it is I'd guess it is a reminder of oil change. I did change the oil at 200 hours but how do I reset the blinking hourglass? I could not find it in the manual.

I will need a PB outlet on my JD4320 for backhoe and splitter. I have been reading your posts but I can not decide whether to get the necessary parts or buy a kit from JD. It is my experience that the hoses and other parts are about twice as much at JD stores. If I get the parts from stores...

In short, I am selling my old Ford 1900 to my neighbor after I bought JD 4320 last year. I need info on the following: 1. I would like to attach my old Bradco backhoe, where do I get (or get info on) attachment brackets for the 4320? 2. I need a 'power beyond' connection for the backhoe and my...

I just obtained a 200 gallon farm tank from my neighbor. Way too big for me but better than nothing. It was used for farm diesel. I would like to use it for gas. What do I need to do to clean it, rinse it, before I put gas into it?

I have a number of older implements with PTO that requires a pin hole in the PTO shaft on the tractor side. I recently upgraded to a new tractor that does not have the pin hole in the PTO shaft. What are my best options? Drill a hole in the PTO, or install new shaft ends on the implements, or...

One of the H cylinders on my Bradco backhoe is leaking. Last time I needed to repair a cylinder seal I brought it to a local shop and paid $70 for the repair. I was thinking that I could do it myself. Here are my questions: Where can I get the repair seal/kit? How do I determine which seal...

There are some nice deals on TractorHouse.com, like this: 2007 JOHN DEERE 990 For Sale at TractorHouse.com for $19,299. When I go to the local dealer he wants minimum $21,000. How do I get a better deal?

I get the most out of my 28HP Ford 1900, I am thinking upgrade. I have 85 ac in NoId, and I use the tractor for everything: ground maintenance, incl. roads, snow plowing, auger, backhoe, haying about 40ac for myself and my neighbors, and bringing logs to my sawmill. The ford 1900 is puffing and...

Where would I get a new ignition switch for my Ford 1900 tractor?

Please, help ne identify this sicklebar mower. I need manual and parts. Thank you all.

I need to make better ditches along the roads around my place so the water runoff does not take my roads every spring. What are the best tools for it? Is there an implement for a tractor? (I do have a snow plow, box scraper, backhoe.)

\'New\' Member No complains here but it is funny when it says 'new member' registered in 2002, while there may be 'elite member' next to name registered in 2004. Now I know it is by posts submitted but it looks weird when it says 'new'.

There is something wrong with the hydraulics on my F1900. It may or may not be related to the cold spell we went through, 5-20F during the last 10 days. It is in the 20s now but no improvement. After I start my tractor the loader and 3pt will work for about 1 minute but then it stops working...

I have the JD 24T baler. What is the model of JD swather that matches my small JD baler?

I have 1977 Ford 1900 4WD. Yesterday I started to hear and feel click-click in the front wheels associated with the front wheel drive. I suspect gear damage either in one of the wheel gears or the front differencial. It goes away when I disengage the front wheel drive. I am not sure how long I...

We have about 45 acres hay field with my neighbor, my portion is about 20 acres. It grows a mix grass of fairly good hay for horses and cattle. Until now we had it cut and bailed by a friend farmer who took 2/3 of the hay. I decided to do the hay myself. I found a nice bailer and rake but I do...

Chinese PTO 6\" Chipper Problem I have been using the chipper for about 5 hours. Then it clogged just at the chute entrance. Maybe I overloaded it. I opened it and removed the debris and chipped away again. After a while it happened again I cleaned the chute entrance again but it keeps...

Got 78 Ford 1900 and while using my auger the PTO clutch got stuck. Seems as the clutch lever is open (disengaged) but the clutch is engaged. The result is that I can not engage the PTO while running. What will it take to fix it, easy, hard, experiences?

I am new to this group. I own Ford 1900. One problem I have is that the loader will not function if the 3pt is not in the lowest position. Browsing through some old mail I noticed this solution submitted by RCH: <<<Fitz, I have a 1910 with a factory FEL. Look on the right side rail were the...