Search results

Looking for suggestions. I have a Lucknow rear pto snowthrower with a hydraulic chute control. I currently run 2 long hoses from the front loader valve and use the bucket tilt/curl function to rotate the chute. I'd like to be able to control the chute but also want to maintain the tilt/curl...

Hello and thank you in advance. I'd like to know if anybody has any directions on how to remove a battery from a grand l3540. I see the retaining bar but it does not seem like the battery will come out by just taking off the retaining bar. Any input would be greatly appreciated thank you.

Hello, I have a Grand L3540 and need advice on what to purchase to control the chute rotation on a 3ph snowthrower with hydraulic rotation. I have the hydraulics for my backhoe but I'm not sure how or what I would need to put between the rear hydraulics (normally used for the backhoe) and the...

Below is a link to my photos of our pavillion/garage project. It is 30 x 40. Enjoy!:D Message - TractorByNet.com Photo Gallery

Hello, I'm at my wits end. My property is 95% rock/boulders and 5% hard clay. I had an excavator level an area for a 30 X 40 pavillion/garage. I'm going to close half of it in for the garage eventually. I started to try to dig a hole with my Bh80X and after about 6 inches hit solid boulder...

Does anyone know what the correct kit number or numbers are for the rear remote kit to add one rear remote to a Grand L3540 without a cab? I'm getting a couple of different quotes on the kits and they are varying greatly. I want to make sure I'm ordering the correct kit.

Little Help Please! I have a Grand L3540hst with LA724 Loader with Quick Attachand a BH80X woods BH with subframe. What is the cheapest way to control a grapple? My dealer's service man said I have power beyond because my BH runs off of the tractors hydraulics. I know I can get a simple...

I'm looking into getting a mechanical thumb for my grand l3540 with the bh80x. I have a 16" bucket. I'm looking at something that will mount right on without any modifications and the least expensive but still able to do the job. I appreciate your input...

Cut the grass today for the 1st time with my new GT1554 and loved it. I am a big guy, almost 350lbs and this machine pulled my big but around like nothing not to mention the cut was fantastic. Hope it keeps on keepin' one!!!:)

Does anyone have any experience with the Quadboss 50" front mount finish mower? It has an 11hp Briggs and Stratton motor. Good bad ugly. I need to cut about 1 acre and I don't think a lawn tractor will hold my 300lb body without undue stress. :)

Well, since my machine is in the shop and I'm not out making noise digging stumps or moving dirt I got a chance to enjoy the nature around my house. Thought I would share with everyone. :D :D :D http://www.yum1.com/albino1.jpg http://www.yum1.com/albino2.jpg http://www.yum1.com/albino3.jpg...

Here are pictures I took this morning of the damage to the cylinder. I also took pictures of the plumb job and one of the cylinder that broke the last 2 times..Enjoy!:( http://www.yum1.com/bh1.JPG http://www.yum1.com/bh2.JPG http://www.yum1.com/bh3.JPG http://www.yum1.com/bh4.JPG...

Welp! digging a stump and Poof the left right cylinder on the BH popped it's seal...I don't want the woods 80X any longer....I'm telling them I'll pay the difference for the BH90 kubota hoe...actually for all the trouble I've had they should just eat the cost....If they don't I'm gonna call...

They brought my machine back and not even 1 minute into digging with the BH the dipper seal popped out again and puked fluild. They said it was fixed, that they tested it...This is B. S. ....I called the salesman and left another message saying to come get the machine tomorrow moring and I want...

I'm looking to weld some hooks on the bucket and maybe even reinforce the top lip. Also, I'd like to reinforce a 6ft box blade. What is the cheapest welder/specs that could be used? I've been looking at a mig constant feed that would work with a 20amp outlet. I don't mind if I have to make...

Just got the new machine back from the shop from a hyd leak in the backhoe yesterday, it was delivered to me saturday. After digging a stump for about 2 minutes, the cylinder closest to the bucket blew out the bottom end. This is absurd. I wasn't even close to stressing the !@#$ing thing at...

First day with the new L3540HST and they came and picked it back up. The woods BH80x hoe has a leak in the hydraulics. Looks like one of the lines coming from the 8 or so on the controls. What a bummer, but I guess I should expect some things like this or should I?:eek:

I just sold my BX23 yesterday and I'm taking delivery on a new L3540 tomorrow. Time to get out amongst 'em!!!! woooo hoooooo:D

Hello All, hope the weather is treating you well. A new KK Rotary Cutter 60' is around $750 plus $60 for the slip clutch from TSC. A total of $810 My dealer has a used Woods BB60 with a slip clutch that is 1 year old. Has some dents and some wear but otherwise great working condition...

How does everyone deal with all their friends and new found friends asking them to come over and do work for them with their machines? Do you charge them? Tell them no? Compromise? Just wondering...:confused:

Do you think it is necessary or beneficial to have my tires on my new L3540 loaded? I will be doing a lot of dirt moving, mulching of branches with an 800lb pto chipper, backhoe work. My property is hilly, wooded and alot of off camber sections. If loaded, should I load all 4. Pros and Cons...

Do you think it is necessary or beneficial to have my tires on my new L3540 loaded? I will be doing a lot of dirt moving, mulching of branches with an 800lb pto chipper, backhoe work. My property is hilly, wooded and alot of off camber sections. If loaded, should I load all 4. Pros and...

What do you guys think would be a fair price on a new L3540 HST with a Woods 80 backhoe, Skid Steer FEL quick attach the LA724, R4s, and toothbar?;)