Search results

We built a couple years ago. I looked at a whole house RO. Then they were quoting $16-$20k in my area. My pump house is 8x8. They said it was too small for a RO system. Equipment plus storage tank. Also, they recommend a quality UV system behind the RO storage tank to kill anything that might...

Just a follow-up. I have used the hoe bit. It all seems to be working. No more self motion. Must have been air in the line. Thank you all.

Okay, I will wiggle it around and see what happens. It is the first time that I have taken it off and put it back on. Wasn't sure if I did it wrong. Thanks

I took my hoe off for snow season and just put it back on. Now while I am driving my hoe moves to the left... alli by itself. Any thoughts as to why? Pretty sure I hooked the hoses back correctly.

Etpm is dead on. Without remachining there will be no repair. It is possible to cut another keyway 90 degrees to the failed one. A good welder could buildup the corner of the keyway without doing much damage to the shaft. But, again, that doesn't fix the damaged shaft. Without the shaft...

Paul, you hit my concerns pretty well. Sag and some type of support. Eddie and gstrom99: What guage of roofing pannels and how did you attach them? I like the walls. I started to do the osb as well. I am going to wait for summer to finish so I can burn and seal them. I like the look.

I thought about drywalling the ceiling. It is not impossible to drop all the mounting hardware and putting it back. I could move all the mounting points up one hole on the hangers to compensate for the sheetrock. I do have access to a sheetrock lift. The hard part would be clearing the floor...

My garage is attached to my house but, is per code, " fire barrier isolated " from my house. I did not have the garage ceiling sheetrocked or insulated. I had some things I wanted added in after we moved in. Now I need to insulate now and since the garage doors are hung and openers are in, it...

The other consideration is... do you have any pack rats in the family... Seriously, people don't really need much space. Their stuff needs space. It is amazing how much can be packed into 2,400 sqft. If you don't mind not being able to walk through the place. Like, really, do I really need 8...

https://www.tufftorq.com/ Snoop around here. Lots of good information.

I am pondering snow removal and maybe some light dirt pushing. Does the 2340 blade have springs? If not.... is that a problem? I have access to a small side by side, I know they make snow blades for those as well. I have 1,000 to 1,500 feet to the county road. Driveway is gravel. I see...

Haven't had a teenager is a long time. It is our retirement dream. Home with a place for some cows, chickens and gardening. Three bed two bath plus the studio apartment. Filters, left that out, sorry. Spin down filter, iron filter and water softener. Lots of iron in the water. I never thought...

We are setting up our water system. The pump is 20-25gpm rated. Feeding through a 1 1/4 line. There is an unfiltered 1 1/4 irrigation line going out of the pump house. The house, shop and studio appartment will be filtered water. All those lines are laid at 1 1/4 inch. Here is my question...

Okay, that makes sense. I know the hydro is the weak spot in these small tractors, as far as power goes. Thanks

So, question. Cold weather tractoring. I see all these snow plowing comments. We are, God willing, going to be in a colder climate next year. I will be de-snowing over 1000 feet of driveway. For at least the first year the tractor will be outside under some kind of cover. The question- how...

okay, I shouldn't but... I never learn. there is no doubt that the cases are down and the flu is pretty much non existent. these are facts, yes. many attribute that to mask wearing. so, there are multiple types of N95, some are vented some are not. so a virus could move out but be restricted on...

"The graveyard is full of indispensable men." attributed to Charles De'gaul "Discernment is not knowing the difference between right and wrong. It is knowing the difference between right and almost right." - Charlres Spurgeon …”Few men have virtue to withstand the highest bidder.” George...

I will have 15 acres to deal with but, for reasons I cannot go to a series 2 size tractor. That leaves me with the series 1. I almost brought home a LS125 but at the last moment hesitated. My property is sloped and has several undeveloped springs on it hence, the hoe. There is also a half mile...

so, someone borrowed my tractor and pretty much everything else from my shop a few years back. I had a grey market 13hp with tiller and loader. It was fine for what I was doing... tippy but okay. Now I am trying to decide if a subcompact will work and just rent a hoe for ditching and the...

so, I took my fathers LX460s mower deck off to replace the power belt (who is the ... gentleman that designed this system???) After four tries to get the belt on and fitting over all the pulleys, still not sure I have it correct. I remembered I had to take the bracket off that holds the end of...

I have a TX1300 that I have not started for a few years (work got in the way of life.) What is the best way to restart it without damaging it? I have thought about pulling the glow plugs and spraying some WD-40 down the cylinders but, I don't know what the torque is for them. Where can I find...