Search results

…….. for the same reason that I love to drive my Silverado crew cab, long bed, Duramax 4x4 one ton diesel DUALLY. I see a lot of one ton pickups on the road & I happen to ENJOY just driving it when not towing my 5th wheel travel trailer. Sure there are a lot of Wranglers out there but also tons...

Miss my ‘81 F150 single cab 2 wheel drive, 300 ci 6, Longbed; vinyl bench seat, crank windows, blk. vinyl floor, that I bought used in ‘85 for $2500 bucks & had for almost 18 years. That was one tough,no frills work truck !!! Ended up selling it for $1000 bucks.

760 hours on my ‘02 Kubota BX Sub Compact. Have always used 4WD only when needed…..

I know that this doesn’t answer your question but the main culprit in gas powered equipment hard starting/ no start issues is ETHANOL …… gums up the fuel system. Learned that the hard way & only use non ethanol gasoline. PROBLEM SOLVED.

I want to mount a 40 gallon sprayer to the rear of my sub-compact tractor's 3ph. Anyone know of an implement that would attatch to the 3ph to attatch the sprayer to?? Brand, company???? I'm not interested in building my own and have done a search with no luck.......Thanks

I'm sure that this has been discussed before but here goes anyway....I currently have a BX2200 and love the machine. I use it to cut about 3-4 acres around the house, and do the usual "Harry homeowner" tasks around the property with my loader when needed. I let my neighbor who is a farmer...

I spent some time today using my boxblade on my gravel/ crusher - run driveway trying to "dress it up".Then put on my back blade smooth things up but when I lifted the blade up heard a loud clunk. Turns out that my right "Turnbuckle" rod was bent. I was able to straighten it out and put it back...

Ive read some posts lately concerning leaking hydraulic hoses (Power Steering, Loader) on the BX series. For those of you that had to replace them .....was it that difficult to do so?? What advise can you give us to make the job easier?? Same goes for the mower deck belt. Just preparing for a...

Anyone out there use a drag harrow to dress up their crusher run / gravel drive??? I'm considering getting one for my sub-cut to dress up my drive and control the weeds. What do you think of it if you use one???

For those of you that are looking for a great impliment for your sub-cut...Tractor Supply has a 48" King Cutter "XB" Box blade on sale. (10% off till 7/9). I was looking for something to maintain my crusher-run / gravel driveway and turnaround, and had been looking at some options including the...

Looking into the new "DR" Power Grader used to smooth out gravel /Dirt country driveways. Does anyone have one and if so what do you think of it??

What do I have to do to "Reset" so that posts appear with my time zone's?correct time?? It also appears as if there have not been any recent threads today (Saturday) 6/17....is the system still being upgraded??

I'm interested in a duel axle dump trailer for "Harry Farm Owner" work..hauling and dumping gravel, mulch, topsoil, etc. and to also use to haul my motorcycle and sub-compact tractor from time to time. Tired of "shoveling" this stuff out of my current utility trailer. Will haul with my 5.3...

Hope I'm at the right forum....I currently have a 6x12 single axle utility trailer with wood floor and while it's really come in handy, I think that a duel axle dump trailer would be more versitile for my situation. I would use it to haul and dump crusher-run for my driveway, mulch, topsoil...

I understand that some of the new Bx series tractors have larger front wheel tire combinations. has anyone with a BX2200 put larger front wheel/tire combos on theirs??

I've had my BX since Oct. '02 and I think that it is about time to flush my cooling system.....for those of you that have done it are there any tips that I should be aware of???...any problems with air getting trapped in the system like in a car??...is radiator "flush cleaner" necessary??...Thanks

Installed a Markham toothbar last week on my Bx's loader and I'm glad I did. Picked up 18 railroad ties yesterday to do some landscaping on my utility trailer and used the loader to drag them off one at a time...then carried them in the bucket to where I wanted them. For anyone who has worked...

I lifted my bucket pretty high today to clear a wall and must have put too much tension on one of the hydraulic connectors....bucket wouldn't lower. Dicconnected the connector that appeared loose and had a @$%#@ of a time trying to get the male connector to seat properly. Has anyone elce had...

I know that there have been posts in the past about bolt on toothbars for the BX bucket but I can't find the company name......for those of you who have ordered one..what company ?...cost??...do you like it?? Thanks

I currently have a 5ft. "Bush Hog" rear blade for my Sub-Cut and while it does a fair job leveling dirt, etc., it just dosen't seem to have the weight to level gravel....doe's anyone out there use a heavier rear blade on their sub-cut and do you like it ...what brand....cost????

I'm considering purchasing a used skid steer loader for hire to supplement my pension and to give me something to do with my free time. I just had a contractor who installed a stone wall for me let me use his bobcat to move dirt and while I need alot more practice, I think that this is something...

"Sun Guard sunshades" on your search engine

canopy\'s I've been looking around for a while for a reasonably priced rugged canopy for my sub -compact Kubota BX 2200 . I recently purchased and installed one from a company (SUN GUARD Mower Canopy's (on your search engine) and am really impressed.......easy to install and material made from...

I know that this subject has been discussed before but I wanted to get some current feedback........I'm interested in a quality metal (diamondplate??) canopy for my BX2200. Using the tractor in the hot sun is getting to be a pain (no pun intended) and I've seen too many of the fiberglass ones...

Junkman..... Whats this about you jumping ship for Green and Yellow????

Hey Guys....Just wanted to get your opinion on this........When I purchased my BX in Oct. of 2002 I financed it thru KUBOTA CREDIT for 48 months. As many of you know Kubota Credit requires the borrower to have insurance which I purchased thru them and tacked it into the financed package (BIG...

While in my garage yesterday I just happened to notice that my BX2200 leans slightly to the right (about 1/2 inch) if you're looking straight on at the grill. The garage floor is perfectly level. Tires and rims are fine including air pressure. There was an earlier post concerning this but it...

Before I remove the Hydro strainer I just wanted to touch base with those of you who have already done so so that I don't screw things up. Is it difficult to remove and re-install...are there groves on the strainer for the O rings that I have to be careful for????

I'm getting ready to change the Hydraulic/Transmission fluid on my BX but before I do I wanted to ask those of you who had NO problem in removing the Hydraulic filter and "strainer", since I read previous posts stating that the filter was difficult to remove. In regard to the "strainer" can...

THAT TBN POPUP IS VERY ANNOYING....ANY WAY TO ELIMINATE IT????.....

While I think the world of my BX I'm dissappointed with the break out force of the loader. I attempted to pull out some metal "strap down stakes" used to secure a mobile home out of the ground using my BX loader and they wouldn't budge. Had to resort to digging by hand and using a Farm...

I know that this has been brought up in posts past but I thought that I would check again. Has anyone found a bolt on poly edge that would fit the LA211 loader on the BX2200?....if so where did you find it??...I'm tired of marking up my concrete driveway while pushing snow and wanted something...

I've read other posts about gearbox oil dripping out of the "GEARBOX VENT" when storing some 60'MMM's in the vertical position. I've looked but couldn't see the vent...maybe it's these 56yr old eyes...can anyone help??? .....also was wondering if anyone has any suggestions on how to relieve...

I just wanted to pass this on to those of you who are going to re-install your front loader. make sure that you carefully reattatch your hydraulic hoses so that they do not rub or bind against each other especially when the loader is in the full lift position. I noticed some wear on one of my...

Does anyone know of a company that makes a "Bolt On" snowblade attatchment for the BX2200 loader?

I've been trying to locate info on a snowblade attatchment that will "Bolt on" a BX2200 loader....does anyone know of a company that sells them or if they even exist???

After using my front loader last winter to scrape snow off of my driveway with my BX2200 I noticed scrape marks left on the concrete. Has anyone come up with a solution for this??? Are there any aftermarket plastic edge guards, etc. that can be installed on the bucket to prevent damage to the...

I know that there was a post some time ago but I can't find it. What size socket do I need to remove deck blades??....are they reverse threads??..Thanks

Does anyone out there sharpen their MMM blades while still on the deck?.....best way to do it??

Oil capacity with filter for BX2200 is listed as 2.6 quarts. I noticed a post that the BX actually holds 4 quarts and that is what he puts in his. Can anybody clarify??? Thanks

I just reattatched my mower deck today after doing some front loader work. When I took the deck off I switcked to Bar tires for better traction. Now I notice that after reattatching the deck with the Bar tires still on that there seems to be very little clearance between the deck and right tire...

HENRO...Thanks for the info............

I'm due to change my motor oil soon on my BX2200. Owners manual calls for 10w-30 or 10w-40. Have only been able to find diesel rated 15w-40 name brand oils at my local "big box" store. Are these oils ok or should I stick with Kubota oil?? How about oil filters?? Will any name brand such as Fram...

I am interested in a quality ROPS mounted sunshade with diamondplate having a low clearance.....any suggestions???..if you have one how do you like it and what company?????? Thanks

I'm interested in installing a quality sunshade with a low clearance to the ROPS on my BX2200.,preferably made out of diamondplate for durability. Has anyone installed one on your BX and how do you like it????....what company????

owning-ML-291292-ML- Kubota question in a Deere forum

For those of you who want to keep your tractor looking brand new especially the ROPS bar.....you have to constantly watch your clearance near obstacles. As careful as I've tryed to be, the other day while pulling out of the garage, I clipped the handle on the open garage door, then after...