Search results

Hey all, I am finally getting around to posting some pictures of my most recent project. I purchased a very sad Meyer C-8 snow plow at an auction about two months ago for $50. The skin of the plow was full of holes, some of the ribs had cracks in them, but everything else looked useable -...

Well, I finally finished the pallet fork attachement for my JD4300. It works on my 430 loader and the 3 point hitch. Total cost for this project was about $225 ($75 for the forks, $50 for shearing, about $75 in new/used steel, and about $25 in misc. stuff). I want to thank rancar for giving me...

I like the simple design of the quick tach JD pallet forks and was wanting to build my own based on that design. There aren't any to look at in my area, so I need some help on the dimensions from those of you who own these. I'm looking for the following: Dimensions and length of top and...

The MFWD dash light on my 4300 quit working a couple of weeks ago, so I figured the bulb was burned out. I have since changed the bulb (old one looked fine) and the light still doesn't work. Now I'm thinking that the switch that activates the light is either bad or disconnected. I have looked...

Thanks to liledoun, I have finally been able to piece together a top & tilt setup for my JD 4300. His post "My homemade TopNTilt/4th&5th control valve" helped me figure it all out. I actually finished the project a couple of months ago, but finally got around to painting everything this past...

Hey all, I've had a tiltmeter sitting around for several months and finally figured out how to securely mount it to my 4300 in a very visible location without drilling any holes. See attached picture. Steve