Search results

Results 1 to 7 of 7
  1. N

    Century 3525 grinding pto when activating

    Everytime I try to place my 2535 in either 540 or 1000 PTO mode the gears grind it's hard to get it to activate without pretty severe grinding. Once it's in place it runs fine no other noises or problems. Has anyone had this issue and if so what did you do? Thanks in advance as always you...
  2. N

    Century 2535 Can't get PTO to engage lever won't move to 540 setting

    While bush hogging a large field the PTO began to make a high pitched sound then went into a free wheeling mode (spindle was spinning but not driving the driveline shaft) I could not get the lever out of the 540 position for quite some time then I was able to move it all the way into the 1000...
  3. N

    Century 2535 Hydraulic leak

    The 2 bolts, 1 above and 1 below the sight glass were loose I tightened them but it still weeps fluid from the edge of the sight glass. If I push on the sight glass it does flex a bit, I assume it should be solid with no movement at all. I wonder if I could have backed into something that hit...
  4. N

    Century 2535 Hydraulic leak

    I have a 2004 Century 2535 with about 300 hours on it. It has taken to leaking hydraulic fluid at the sight glass. I can't really tell how the sight glass is installed to the casing. Is it some kind of threaded screw in attachment or does it come from inside out with an attachment inside of...
  5. N

    Oil & Fuel  Century 2535 leaks fuel at fuel filter

    Hi Y'all I recently bought a Century 2535, It had 112 hours on it and appeared to be in great shape. I have now run it for about 12 hours and found a pretty significant leak coming from the back side of the fuel filter. If I shut off the fuel lever it stops completely. If the tractor is not...
  6. N

    Price Check  MF360 w/236 FEL price check

    Hi All. I have found a fairly nice MF360 with a 236 FEL for $11,500. private owner. It has been repainted and has about 2400hours on it. Is this a fair price? What should I be looking out for on this tractor? I have seen it briefly but plan to visit soon with the owner so I can run it and...
  7. N

    the CT235 vs CT335 question again

    Hi all. I've been reading all the posts on here for a few days and decided to jump in. I am in the market for a new tractor and actually started out thinking MF 2605 or NHTT45 when I began to read the Bobcat forum. I got a price of $15400 for a stripped down 2wd 2605 w/ FEL and $15200 for the...
Top