Search results

Results 1 to 8 of 8
  1. T

    4X4 engagement on ford 1910.

    I've used my tractor for the first timetoday..I mean more than back and forth pratices while waiting for the snow. Wich snow arrived today so I went out to get it working a bit.I needed to go back and forth from 2 wheel drive and 4 wheel drive and sometimes it wouldn't disengage..the little...
  2. T

    Overfilled gear case (1910)?

    Hi, The manual says 29 litres capacity on my 86 1910 ford.I've had it drained tillthe last drop through the two draining plugs.Yes the oil was warmed-up.I have refilled about 25 lires.With this the oil dip stick shows 1/2 or 1 inch overfilled depending if I threaded it down or not.I ve replaced...
  3. T

    Tires  tires mounting lube, preparations tips?

    I am about to reinstall my tires on my 1910 after having repaired and painted the rear wheels that were showing signs of corrosion. Now both tires were pretty sticky to the rims outboard side...why outboard rather inboard I don't know!So anyway my question is:Is it good practice to maybe buff...
  4. T

    Ford 1910,lights,temp gauge.

    Hi, Is it normal for my temp gauge on my 1910 to show high temp when switch is off? When I turn that switch (ignition) fuel gauge goes up but heath down to cold as it is when just started...This is a recent acquisition and did not use it much but it doesn't sound right! Another question...
  5. T

    20 years old inner tubes.

    Hi, Recently bought ford 1910 tires are filled with calcium solution that's been there since new wich goes back to 1986. Some corrosion is visible around the stem area on the rims wich indicate some leaking during the years of use. I intend to dismount the tires and have the rims...
  6. T

    pics of 1910 ford.

    Hi,here is a picture of the 1910 I had recently.1200 hours,1986.If I can I will squeeze-in a second photo showing a cut wire sticking out from the transmission cover...anybody knows what is it for? Hydraulic oil temp sender I can think of but there is no guage for it!Reverse light maybe? thanks...
  7. T

    Oil & Fuel  1910 hydraulic oil changing/flushing.

    Hi, I am due for changing the hydraulic oil and filter on my 1910.Apparently the PO ever changed it during its 18 years of ownership with 700 hours!! Anyway the system functions good but as said sure I will change the fluid;now I remember having read something about flushing the internals with...
  8. T

    1986 ford 1910 new aquisition.

    Hi, After over a month scrutinizing tractor ads,when I saw this 1986 1910 with an Allied 380 loader and a nice vintage 72 inches McKee snowblower,1200 hours,I jumped right in at distance through the phone unseen! Altough I have not used it,working with it yet,it appears in excellent shape...
Top