Search results

I found the fix for the leak when I asked and old friend who has been working with hydraulics for 30 years to look at it and it took him 5 minutes to find and solve it. The leaking hose I had tightened it till I thought it would strip the threads. He just took it off and put it on and tighened...

oldsnlo, thanks for the suggestion but I have the service parts and manuals. Problems is I have front and rear remotes that are hard to find parts or manuals that could help much. Thank you very much for your thoughtfulness.

I finally got the 3 point hitch to work by tying both rear remotes together. This also got the front remote, or I might be using the wrong term, to now I have full function of the loader of which I had none of before. The hose that was spraying before is now dripping, still a problem. But will...

Here is the requested schematic.

I don't want to waste any ones time but this is the "nozzle" that has a connection to the case of the lift arm and another connection to the hoses I replaced. It is 7 feet long and goes to a connector on the joy stick. I got the hydraulic system from Branson schematic and it clearly shows that...

One important thing to know about my hydraulic system is that I have two hydraulic pumps. The main one supplies the filter @ 8.4 gpm and the filter puts it in the transmission case. The high pressure one supplies 2886 psi to the hydraulic power cylinder that has two outputs connectors that go...

Thanks very much for the info prsb. The thing I don't understand is on my loader valve joy stick I have two valves to the rear remote for the back hoe and on for the to the 3 point hitch lift arm.Then there are 4 loader valves but there is no connection from the hydraulic block I haven't looked...

How does the joystick on a tractor get it's pressure from the hydraulic pump?

ptsg Thanks for the info. I have front and back remote. The back one is for my backhoe and the front one is for my dozer blade. My problem seems to be low pressure to the remotes and loader.

I have a question about the rear rock shaft. It worked perfectly till I changed the hose. There is fluid with no pressure in the line but what looks like a valve that feeds the rock shaft through a metal line and tied to the hose to the joy stick. It won't lift the arm. I once read on a forum...

Ruff dog you got it right and you too Harry.

Ruff dog you got it right,

The hoses were made by NAPA and I inspected them I got them and all good. The hoses that leaked I changed out with the original one and it leaked just like the new one. I don't think was the crimp.

There are a few more details I need to mention. That remote has two lines in and the lines out. Of the two out one one seems to be getting all the pressure and is spewing.The one on the right. Also the dealer I work with mentioned that I should check the push connectors on the joy stick for...

On the top photo the hose on the right on the remote is the one spewing.

As to the hoses being possibly connected wrong, no two hoses are the same length and I had two on the remote and two on the spools, and it's impossible to swap them. I've replaced other hose on the loader before with no problems. This time it's making me nuts.

I have a 2007 Branson 3510i tractor with front and rear remotes on a BL10S loader. Had it for 14 years with no loader problems, recently found a hose with a leak and since I'm not near any place for service I decided to go ahead and replace 5 hoses that showed wear and potential for problems...

You might want to check this out before applying any at all.

I don't think we'll be living with fuel prices as they are now for too long. The current resident of the white house will be replaced by the one who gave us fuel prices that will make at least me forget EV's. Don't know when butttt.

The problem with clamp on's are lack of visibility and they're not as rigid as a whole unit. Just my opinion.

I've had mice get into my Ford F250 three times and built nests in the HVAC fan and the the evaporator cost me over 5 grand total. It finally dawned on me that the other three former trucks were diesels that were never touched and this one is gas, therefore I poured diesel fuel around the...

Looked up from breakfast table and was surprised to see a large brown object, and it wasn't a turkey this time but much bigger. He looked rather pathetic as it had just rained. This is about 12 feet from our porch.

I bought a couple Branson tractor hats and got a 2011 Branson calendar and was surprised to see the big changes. Looks like the 3510i becomes a 3520R and newly styled with it looks like a one piece hood and the joy stick is on the right fender. On the front cover there's an 8050 with cab...

After having an overpriced under weight John Deere 770 I wanted a heavy well built tractor with a good reputation and a good warranty. I liked the Cummins collaboration in the diesel engine design. I sure like all the standard items you pay extra for with the big three. The fuel tank location is...

Does anyone know what the DX emblem on Branson tractors mean?

I'm considering replacing my carpet in my house with floating cork flooring. Has anyone put down a cork floor and can you tell how it wears and what brand or brands would you advise?

I just bought a 2007 Branson 3510i with 80 hrs on it. Looks to be very well maintained and the dealer he bought it from delivered it and did the 50 hr.maintenance. He's real thorough. It has a 7620 Back hoe, skid steer loader, dozer blade, King Kutter 7' blade and a field cutter for $22500. How...