Search results

The only time my tractor failed to start was a dead glo plug. It was getting hard to start for a few mo.s leading up to that. I replaced all of them with NGK and now it starts faster and runs cleaner than ever before.

Try running the tractor with the tank "cap" removed, if that solves the problem drill a small hole in the plug to vent the tank.

OK, I found the short, turned out to be a shorted glow plug. Traced all the wires in the glow circuit and nothing was grounded so I took the power wire to the glow plugs and ran a jumper (with connector bar removed) to each glow plug and hit the key, glow plug light stayed on until I reached #1...

Where do I look? I found parts & lubricants but no wiring diagrams.

I removed the jumper bar and (I'm not sure what scale I was on) but I got 6 on all 3 glow plugs and I took the glow plug controller apart because I couldn't find a ground in the connections on it and every thing looked new, coil, contacts, and circuit board showed no burned areas so I would...

LOL Yep that was the first thing I did. I popped the top off the blowen 50 amp fuse and wired in a blade fuse holder that I then made two short cables with male/female connectors that plug into the blade fuse holder and a H7 head light I had laying around. Now I'm hoping someone on here had the...

Hi the tractor ran fine whin I parked it. I went to start it after it sat for 2 weeks and after 5 sec.s heating the glow plugs everything went dead. I found the 50 amp. fuse on the glow circuit had blowen, I couldn't find any damaged wires after a quick look so I replaced the fuse which blew the...

Hi I need to build a road (driveway) down to the lower half of my property. I have a Mahindra 1815 4WS HST W/box Scraper and Front Loader. I know how to split the differance of high/low with the box scraper, but what is the process to lay down new chip rock over dirt? It will be in a dumped...

Hi, I have a Mahindra 1815 that I'm using to landscape and prep a building site for a pole building for starters. Being new to the tractor world I would like any info. on how you make a gravel road from scratch with a box scraper and loader. I think I know how to level with the box scraper just...