3rd

I'm adding a grapple and 3rd function to my 2120 for moving logs but can also see myself using a root grapple for clean up work. Is a grapple controller with momentary switches preferred, or are On/Off rocker switches more desirable? I realize that if I use On/Off switches I will be taking flow...

I have a third function installed on my Kioti 3510 using the flat-faced skid steer connectors. I can never get it connected without completely unscrewing all of the connectors and releasing pressure on both the tractor side and the attachment side. I never have this problem with my rear...

Hi Guys, Just wondering if anyone has used one of these cheaper kits? Looks to me like a knockoff of the summit kit. Hope the link works...

Hi Everyone, I know there are a couple of threads regarding the 3rd function for the 7320 but none of them have specifics on the install process. Yes I agree the picture instructions are essentially worthless so hence I need the help. I know others have requested this recently as well. I am...

Looking for pictures, videos or any good instruction on how to install a summit 3rd function for my Kubota B2620. The instructions it came with lacking good 'how to'. Any help will apprecaite very much. Jorge

Well, if you do, and it's annoying as heck, then BoltOnHooks LLC has the solution! This module eliminates the cumbersome 3rd SCV Switch found on the model year 2011 and newer 3x20 (3320 / 3520 / 3720) cabbed and open station machines with the electro/hydraulic 3rd rear SCV that is operated from...

Considering a YT359, and I notice that the 3rd function on the joystick is only one button. Does this really mean it is a diverter valve rather than an independent 3rd function? Otherwise how to you change the flow direction (open/close for a grapple for example). If it is a diverter valve...

I recently got a 3046R and attached a snow blower to the rear of it. The snow blower has a hydraulic actuator that controls which way the snow will be blown. How do use the buttons on the joystick that are for the mower deck and change them to run that actuator on the snow blower?

Is it possible to design a pressure release on a work port from a solenoid valve? Many times when trying to release or connect our grapple there is too much pressure in the lines to get the quick connects to release. In my mind I picture some some sort of release pathway that can be triggered...

Hey folks, So… after 2 hurricanes in as many weeks down here in FL. I need to add a 3rd function to my ‘lil 180. Any one here tried it? I am going to start researching the loader valve first and then look to see if I need to try to run a diverter on it or if I will need to put in a secondary...

I ordered a TTWT inspired Artillian grapple today. I was disappointed to learn that Artillian does not have a hose kit that goes from the JD true 3rd function hard line quick disconnects to the Artillian splitter manifold. I also ordered the Artillian hydraulic flow control valve as I have the...

Folks, I am in the process of installing the 3rd function kit on my SA425 and have a couple of questions: The dealer indicates that their installer does not even use the Lock Regen Plate (P/N. 1TN328-43450) included in the TVK-YL210P 3rd function kit. I actually saw one SA425 on their lot...

I’m due for an oil change and I’m wondering if any TX25 owners are using an oil filter from a 3rd party and which one you’re using. Summit’s PN 803007059A 1356 OIL FILTER international tractor

Hooked up my grapple. Arms open one at time very slow. Close same way. Replaces quick couplers on grapple, no help. Took solenoids off clean it all put back on, no help. Pushed the cooper pins in to free them. Now my tractor is making loud noise at the hydrolic pump I think ? Tractor is new only...

I’ve been browsing for the past couple of weeks on 3rd function kits for the 474 and can’t seem to get an answer on if the universal kits sold (they’re about half the cost of the tractor specific ones im seeing) will work on the tractor. Any input would be great and small businesses to recommend...

I've got a 4820C with 2 rear remotes. Is there a kit or a way to add a 3rd remote?

I have a 5420 2wd cab with loader. I'd like to add a 3rd function to run a grapple. The cab model tractors with factory loader have levers and not a joystick. See pic Has anyone installed a 3rd function and how(where) did you add the switch. There is a spot for a third lever but its very...

I have a ym 3810d and would like to add a grapple. Has anyone added a 3rd function to one of these older yanmar's? If so where did you buy it and did you just tie into the power beyond side of the hydraulic valve?

Does anyone know the flow specs for the M59's auxiliary hydraulic Flow Rate and Pressure? If so, are the 3rd function or rear remote rated for continuous flow? Any limits? I can't seem to find any of those specs in the operator & shop manuals. Maybe someone knows about using auxiliary flow...

Just had the WR Long 3rd function kit installed on my YT235 and I’m already finding some things that appear to be done incorrectly. If someone has the 3rd function kit installed I need to ask a couple of questions or share some comparison photos.

Was curious what the price for adding 3rd function is. I will be plowing my driveway, and have been using a manual angle plow on my 1026r that I am selling. I’ll be test driving a ck3520 this Saturday

Now I need to get a bunch of hoses made.

Hey y'all, new here. Was hoping to find some help with my 5075E. Was out running it a couple days ago and it was shifting into all the gears and acting normal and then randomly one time I went to go back into 3rd from second (just going down the road, no implements running) and the shifter lever...

I'm not finding much direct comparison between WRLong third functions and OEM kits. I am considering installing it myself (mainly to learn more about maintenance). Both kits are virtually the same price. I'm on a kioti, and the instructions are from what i read - but i care more about...