bobcat ct120

My bobcat ct120 can lift about 400 lbs. could a Linear Actuator with a lift force of 200lbs work for a thumb on a bucket. Mostly to hold brush on the bucket for traveling. I don't intend to lift logs with the bucket tilted down position. Putting a diverter valve in seems like a lot of work...

Does anybody know what model the front end loader is for a 2007 bobcat CT120 tractor? I want to buy one and I am hoping to see if kioti makes a front end loader that is good for my tractor.

I know someone who might sell their Bobcat CT120. Are any of you using this model or the similar CT122 as a Lawn Mower with a belly mower? We currently cut our 2 1/2 acre lawn with a Toro Wheel Horse 522xi tractor/mower. My wife is very fond of the Wheel Horse and will not consider a zero...

My bobcat cg120 has 400 hours and I had a new Fuel filter put in at 360. Back then the rpms would do the same thing. They would be normal and then drop to a stutter. Now it is doing the same thing.

Any helpful Info. on the ct120 would be appreciated. Have owned it for three years and have had a problem with the four wheel assist foot pedal on left foot side; it sticks constantly needs constant lubing. jesse

WIX Filters : Filter Look-Up

I'm looking at a new 2009 CT120 from a dealer. It has the FEL included and have been quoted a price of $11500 delivered. Also trading in an early 80s ford 1100 in good condition for an additional $2500 (basic 4wd, no FEL, etc), so $9000 difference. Just wanting a little feedback on how this...

My CT120 has 51 hours on it. I was getting ready to service the tractor when I checked the radiator. To my surprise there was oil in the radiator and the engine coolant tank is full of black oil. You dip your finger in it and it comes out dripping with oil. I took it in to the dealer and...

I took the front end loader off of my CT120 a while back and ever since I put it back on the bucket doesn't stay in position. It gradually drifts down as if the cylinder is leaking down. Any ideas what might be going on?

I want a 4ft tiller for my Bobcat ct120 which has about 14 hp at the pto. I looked at the KingKutter XB which is rated for sub compacts up to 25hp. The hitch will not work on my Harbor Freight quick hitch which I like very much. I would have to take the quick hitch off when using the tiller. All...

Is my CT120 PTO gear driven or hydraulic?? Do I need a slip or over run clutch? I run a 5 ft brush hog on buck-thorn and grass/weeds.

I'm thinking of adding a tank heater to my CT 120 for cold winter starts. Have any of you added a heater to your tractors?

I am considering purchasing a CT120. During a testdrive at one dealership, the tractor lost power and turned off when I turned at its maximum in either direction. I didn't buy the tractor because I thought the problem was specific to that one tractor. I am now talking to another dealership...

I just purchased a CT120 from a local dealer. It was a demo unit with 48 hours, very clean, full warranty, loader and MMM. Got it for $12,000. Seemed like a pretty good deal based on other brands but was wondering what others thought. Also, I spent a fair amount of time researching tractors...

Is 17,000.00 a good deal on a new Bobcat ct120 with loader and backhoe vs a more powerful used Kubota in the same price range. I can get a warranty on the used Kubota so..... 5 acres with horse arena that needs dragging, field mowing, occasional fence building, pond digging / jobsite...

I just got a response back from Rhino on the 6TL loader that Bobcat used on their CT120 kioti tractor. it is 830lb lift at the pins and 600lb 500mm forward (the spec sheet is reversed) so that is a good 200lb less than the Kioti 120 loader. Nick

Thanks to all you TBNers who take the time to write unbiased reviews. I'd been considering a small tlb for sometime, leaning toward a GC2410 or BX25. I took the advice most seem to give, go with the dealer, they're all good machines. Bobcat seemed to actually want to sell me a tractor and to top...

the bobcat dealer priced a ct120 with mid mower for 11.200 is that a fair prices.

DOES ANYONE KNOW WHAT SIZE GREASE FITTING FOR CT120 AT THE FRONT AXLE PIVOT. I HAVE TRIED A M10X1 BUT IT WONT FIT. THANKS

After looking all winter and spring for used tractor. I am unable to find something with low hours or in decent condition. So it looks like it will be time for a new CUT. I have been unable to find any info on the new Bobcat tractors. Anybody have one or checked them out yet? Bobcat has what...