branson 6530

I have a Branson 6530 with the BL30 loader. The hydraulic valves controlling the loader function leaked for years so I bit the bullet and ordered a Branson valve. $1600, ouch. I replaced the valve and the loader functions normally with no leaks. Now it gets weird. with the tractor running it...

Anyone know where I can find some used/salvage parts for the 6530? I had a major failure of one of the front end bearings and it broke the bearing cover and chewed up the spindle pretty good. Branson dealer wants $3500 for all the parts new.

I'm not looking for a Branson tractor, but I thought this was a really good price. I've been to this place a bunch of times and bought a few things there. If you are looking, and in the Tyler TX area, it might be a good deal for you. No, I'm not going to go there for you, or help in any way...

Hi Guys, I have searched high & Low But i Cannot find the Flow Rates for hydraulics on my branson 6530 R, any info would be a big help. Looking at buying a post driver.

Neighbor has a 6530. Ran it low enough on transmission/hydraulic fluid that it shut down. Topped off the fluid and waited a couple hours for the level to settle and the air to work out, fired it up and the loader, 3 point hitch and PTO all work, but it won't move. Acts like the clutch is...

Hi ,I am new here ,i just joined, I am going to an Auction Sale tomorrow and they have a Branson 6530 with 975 hrs. on it. the tractor comes with a quick attach loader, 2 buckets . It does not say year, but what would this tractor be worth, I do not want to miss a good deal but do not want to...

Hi I would like to know if any did it and what parts are needed. I got a versatech 66" grapple and would like to connect it properly. And before someone tell me that 65hp is a bit to much for that grapple don't worry I have two welders cutting torch and plenty of blades for my grinder. :thumbsup:

Hello all, I do not want to start an oil war as I see in other threads, but my manual says to use TF-500 oil. In older threads this has been talked about but wanted to see what Branson owners are using. At this point I am about to just buy deere Hygard and be done with it. Any other...

the pto just stoped. i can not get it come back , new fuses and relay,but still nothing,

I'm very close to upgrading my Branson 2910i to a Branson 6530c (I've decided that the cab and *power* will make my life a little bit easier during the hard winters we have in Colorado). Anyways, I'm a bit frustrated in trying to find detailed specs on the 6530 (lift capacity of the 3 point...

I bought a T-450 TYM last summer 07 love the tractor but want a cab and a bigger tractor. I priced a TYM-700 but i dont know about the 3 cyc. JD motor will be using for hay making.I think the 6530 branson with the cab is nice alot cheaper than the tym can someone that ownes one of these...

I looking to buy one of the two tractors this spring sometime. I have priced both units with the Branson coming in almost 8,000 cheaper than the Kubota. For that much difference I could buy the backhoe attachment for the Branson. The power rating are pretty close on both models with the...

Does someone have a new Branson 6530 with a cab that could tell me how loud it is in the cab. also how you like the tactor over all. and what you think of the cummings engine. thanks for your help.

I just posted 10 photos of the Branson 6530, what a nice tractor.

My MF dealer has picked up Branson's line recently as well as McCormick. I've mentioned that I'm considering trading to a cab tractor and noticed the 6530 on the lot, as well as MF 1547/1552 models with cab. The 6530 has some nice features that I didn't find on the MF models. One is the...

Ok, for all you guys looking for a Branson with gusto....I believe this baby may be what you are looking for.....