century 2028

Need alternate for injectors HT17020100A3

Hi Guys I just bought a Century 2028 with a FEL and I understand it is the same as the Branson 2810 to be the same tractor. I am looking for the manual for either one as I am new to tractors. I bought mine for $5600.00 which i felt was a good deal. but don't really know. it has 616 hrs on it...

My 2028 has been getting progressively harder starting. It turns over well but won't fire until it cranks a long while. This is only when cold or should I say 'the first start of the day'. It starts back fine all day. Next day same routine. It's gotten to the point where now it won't start. I...

i need help, could someone please tell me how to remove the front cover and how to replace the drive gear on my 2002 century 2028. thanks

pdidlysqt i will try to get your attention this way perhaps i left messages for you on my previous thread but didnt know if you would read please send details thanks rogerdodger

wel back again finaly got a new drive gear (splines were completely gone) and hydraullic pump (which shaft was twisted) for this tractor but need pdf file for repairing have most of bolts out of front gear case but have a question about removal of the throttle cable which is in front of case...

hey guys i'm back again does anyone know where i can get an exploded view of my 2028 century and maybe some steps to removal and replacement of the drive gear for the main hydraulic pump? I took the pump of and upon inspection found the splines on pump were twisted and worn thin on end and the...

hey guys i'm back again does anyone know where i can get an exploded view of my 2028 century and maybe some steps to removal and replacement of the drive gear for the main hydraulic pump? I took the pump of and upon inspection found the splines on pump were twisted and worn thin on end and the...

Does anyone know where i can find parts for this tractor I need the main hydraulic pump and dont know what make it is all the sites i have been to have name brands and gpm that is different than my manual says 8.9 gpm at remotes and 13.2 gpm total flow any idea where i can find help getting parts?

all gauges work have checked ground and the switch for the cutch pedal is good. the tractor will start if jump across the starter connection. i can't find any other switch need a wiring diagram

I called a local dealer to get an idea of the cost on a FEL for my Century 2028 and got quoted $4500 for "off-brand" and $5250 for a Branson!!! Am I missing something or is that the going rate for them? I bought the tractor and finish mower for $5000!

I'm hoping someone can confirm that I got a good deal on a 2003 Century 2028. It has 218 hours, has been garage kept and was used to mow a 6 acre yard. It came with a like new 5 ft finish mower and is super clean. You might mistake it for new if it didn't have a few scratches on it...

i bought a 2028 century c29 6 yrs ago with a front end loader and i love my tractor it has been wel worth its weight in gold to me i have done evreything from pushing down trees stumps old cars and am diggin a pond with it but after 407 hours of zero maintanence minus oil and filter changes...

Does anyone know of any major brand oil and hydraulic filters that cross reference for use on a Century 2028 or Branson 2810? I would like to use a Purolator filter if anyone knows a number. Thanks!

Hello, My brother has a Century tractor model 2028 and I would like to buy a backhoe attachment for him. Being very unfamiliar with tractors this is the information I have on the tractor, if anyone knows where a used backhoe can be purchased please let me know. Thank you, Larry -Tractor has a...

Has anyone had any problems with their shuttle shift lever being tight or problems with the Amerequip backhoe bucket welds being crappy and weak?

I have had my 2028 for about 3 years and use it mostly for snow removal. Recently I purchased a 5' rotary cutter. When I hook up the cutter the pto lever will not shift into 540, it just bumps the gears. When I unhook the shaft I can get it to shift into 540. I thought maybe the pto shaft...

I am looking for an oil and transmission filter number to replace those on my Century 2028. I simply would like to be able to buy a filter without having to drive 40 miles to get it. I prefer a Fram or Purolator filter if anyone knows the numbers. Also, does anyone know if there is a problem...

I just bought a new Century 2028. I brought it home today with 1hr. on it. I took my son for a ride and for no reason the tractor stopped and stalled itself. After playing with it for a while, this is what I found. When the range lever is in 1(low) or 2(medium) the tractor will travel about 30...

This is my first time using this forum, but it looks good! I bought a new Century 2028 yesterday with a C-50HL loader with 72" bucket($430 option over the C-50), R-4 tires, block heater, and one set of rear remotes($380 option). Total price, before tax, $14,430. It seems like a lot of tractor...

I'm done with the house and buying a boat. Century 2028 with FEl, C-System 30, FE pallet forks, post hole digger, R4 Tires Calium filled. Only 88 hrs in excellent condition. $13,000

local dealer quoted $17k for the 2028 with FEL. Sounds a bit high...

Locating the fuel tank located under the tractor appears to be a poor location. Is there a problem "banging the tank up" or even tearing it off.

The dealer offered me a Century 2028 with C50 FEL and a rear remote after $700 cash rebate for $14,000. Does that sound like a reasonable price?

Well...Got my tractor back from the dealer today, and it was all covered under warranty!!! Seems that the problem was the throw-out bearing had stripped it's screws. The dealer called American Jawa and explained the problem and apparently they said no problem and that they have been having...

Hello all, What do you think of a 2001 2028 with C50 loader and industral tires with around 45 hours for $11000? The thing that makes this one nice is I don't have to drive or have it shipped being local. thanks Jim

Well me and my son were moving some equipment this morning and I told him to back up to a roller I made....and the clutch won't release. Makes it real difficult to move a tractor if you can't get it in gear....Anyone else with this problem? Don't know what to do now...The dealer I bought the...

century-ML-263132-ML-

Hi all, I have been looking at the TBN boards for some time now, but this is my first post. Last week i looked at a Century 2028 and was very impressed. I have looked at the big 3,but nothing struck me like the 2028 did. I was quoted 16,900 for a 2028 with c-30 loader. Is this list? Also the...

Very similar look, similar spec sheets, and priced identical. The Century is slightly heavier with a little more 3 pt lift capacity but the Mahindra has independant PTO. Mahindra may be a little more recogonized in Okla. with a longer history but there also seems to be more Century dealers...

A friend of mine is looking at a Century 2028 , anybody know anything good or bad about them ? It sure looks good and the price sounds great. Tractor with loader $14500. Thanks