cs2220

At 161 hours on this 2023 unit and today while moving a load of marble I felt a small Kerrr...klunk when going over a small bump and when shifting from forward to reverse on the HST. At first I thought it was the new ballast on my 3pt hitch shifting left-right, but a hand on the ballast soon...

I utilize my CS2220 to move stuff around that my 4.5ton Yale fork lift cannot or does not like to go. How much ballast do I need and can I minimize the size of the ballast? No need to have more than required, right? After think about it for awhile and experimenting how to best utilize the full...

My 2nd time out after the unit was returned from the dealer following a rebuild of the hydraulic system (new valves and pump all warranty work). I was using the front loader to scoop wood chips and lost pressure on my bucket curl. Could hear a hiss when trying to adjust curl and immediately...

I have a 2021 CS220 Kioti with an electrical problem-I have zero dash lights. The tractor starts and runs fine, but all of the dash lights and gauges are dead. Would I be correct to think it is either a loose ground and faulty fuse? Any help/info would be greatly appreciated.

Since I apparently can't leave anything alone I figured I would document some of my mods as well as some of the OEM Accessories I've gotten so far. Newest is the Broken Anvil Step which I believe is pretty new for them. That is some precision fitment right there. Next we have the Lown...

Am I the only person who has a problem with the loader and bucket assembly being sloppy? It seems to have a lot of slack in every pivot area. When I back drag with the bucket is when I notice it the most. There seems to be a lot of slack where the loader arms connect to the loader frame that...

I have a CS2220 with FEL, purchased new this year, which is exhibiting odd FEL hydraulic behavior. When I raise the loader (even without a load) it will slowly succumb to gravity - both bucket tilt and main arm - with the bucket tilt dropping faster than the main arm. There are no hydraulic...