cub cadet 1440

I bought the CC 1440 2 years ago and changed all fluids/filters. All was great until yesterday, no forward or reverse after 2 min into the cut. The Briggs engine running great and doesn't load down at all. I checked hydro driveshaft, linkages, fluid level and hydro relief valve. No leaks. All...

Hello all trying to tap the knowledge of a few experts out there. My Dad has a 1995 CC 1440 with Briggs V twin engine. Every time you turn on the PTO it looses power and bogs down. When running down hill it picks up RPM and runs "OK". Turn to come up the hill and it bogs way down. Here what...

Does anybody have pictures on how exactly the throttle linkage should be set up on the Cub Cadet 1440 with a 14HP Briggs engine. I got the tractor when it was torn apart, I rebuilt the engine, but can't seem to get the linkage right, not sure how it was originally. Any help will be appreciated...

Please help me: What is the repair procedure for replacing the right rear axle/wheel oil seal on the 1440 Cub Cadet?:) :) I may not be able to find this page again! Please e-mail to cliffadabritton@copper.net Thanks. Preacher Cliff Williamston, NC

I have a Cub Cadet 1440 Garden Tractor serial 000877203 that I purchased new in 1995. Yesterday, I noticed the amp indicator light flickered at idle speed. How much? It was a slight flicker for just a split second and then would flicker again in several seconds. The light never came on at...

(reposted from l&g forum- I think there was a thread similar to this here a few months ago but I can't find it or remember the fix??) Hi all. I spend most of my time with the bigger tractors, but my CC 1440 won't start. Battery is good, voltage is getting to the starter, but it only groans and...

Hi all. I spend most of my time with the bigger tractors, but my CC 1440 won't start. Battery is good, voltage is getting to the starter, but it only groans and turns the engine just barely. I'm guessing worn bushings = high current draw, but need to get the starter out. Do you have to pull the...

what type "over the counter fluid" do you run in the hydrostatic tranny?

i am looking for a front scrape blade for a 1440 cub. anyone know what the model number is for the attachment kit and the blade? thanks for any help. Johnny