cub cadet i1046

Im no expert, but i think my cub is mulching poorly...after 4 or 5 days between cuts, my lawn is too thick and the clippings just pile up. Im no expert, but i think my cub is mulching poorly...after 4 or 5 days between cuts, my lawn is too thick and the clippings just pile up. Is there something...

When i turn the key on my i1046 (zero turn lawn tractor) I get nothing on the LED readout, which I believe used to light up as soon as the key was turned. But I can't exactly recall (funny how these things pass you by). The starter will engage, it will not fire. Fuel pump is working fine...

Sorry if this has a solution somewhere; I searched "won't turn," "i1046" and read every post I thought might be close, without luck. Just joined today and posted intro maybe 30 min ago. Seems like I couldn't search just the cub lg forum? Anyway, thanks for any help/info: Tractor is maybe four...

I was mowing this weekend and the left wheel locked up and would not turn. It started making a grinding noise and stopped turning. I had to pull the hydro bypass rod on the wheel and it began to turn just fine. I know from reading other posts that there is a known issue with the brake locking...

Hey all just want to say hello and thanks for alot of the info I gathered. A few weeks ago looking high on the racks at Home Depot as I always do was a Cub Cadet Tractor i1046 Time saver. Well long story short unit was sitting faded and forgoten about so I said lets bring her down. Bent bumper...

Noticed lately that when I lower the cutting deck on my i1046 the right wheel brake drags (usually just momentarily). The dedk is supported on the rear, at each side, by a pin which engages the drop-raise arms. With the deck raised, grab-hook end of the pin is above a pull-rod to the right...

Hi, I have a cub cadet i1046 zero turn riding mower that has had an intermittent brake sticking problem. I release the brake and the left back tire will not turn because the brake is jammed. I put some WD-40 on the brake under the seat and kept working the brake pedal and it finally broke...

Hi, Bought a i1046 from the big box store last summer when my Murry died.. Put about 25 hours on it last year and just fired it up after it set all winter. So far so good and I have really become quite fond of the mower except for one minor irritation that showed up yesterday. I'm thinking the...

Do any of you guys with the i1046/i1050 have a problem holding down the go pedal on these mowers. Mine seems to be stiff. I really have to press hard to keep it down and my leg gets tired holding it down.. and it only takes about 45 min. to mow my yard.

Hi guys, I just found this board. I am going to get a i1046 today...I drove it around the parking lot the other day and it does really do the ztr thing... I have been all over the map trying to figure out what to get but I always come back to this one. I'll try to do a full report by this coming...

Have an i1046 and a little symbol is blinking on the left side of the hour meter. Looks sorta like two arrows pointed at each other rotated vertical. Couldn't find any reference in the owners manual and was wondering if anyone might know what it is. The mower has about 3 hours on the clock and...

I wanted to share my bad experience with the i1046. Please keep in mind that I am not a mechanical expert so please forgive my very un-technical descriptions. lol We purchased an i1046 from our local Home Depot to replace my (still running, albeit roughly) 16 year old JD STX38. I thought the...