I have a 1953 Farmall Super M. The clutch has a lot of slop so I took the clutch peddle off, cleaned it up and found a machined rectangular groove on the inside of the clutch pedal that slides on the clutch/brake shaft. At one time it had a grease fitting to supply grease to this groove-the...
I am restoring a 53 super M and have a question about the belt pulley (not the gear box) on the right side of the tractor. I cleaned the pulley with Simple Green and got the gunk off and parts of the pulley face are clean and look dry, but the other parts seem to be impregnated with some type...
My dad has a 1953 Super M and i have been trying to find a Shop Manual for it with no luck:confused:. Does anyone have a PDF version of the shop manual or know where i can download one?
Thanks for any assistance.
Dave
My grandfather's Super M hasn't been run in 4 years. Today I changed out the gas and added fresh, tried to start and it turned over strong. The exhaust pipe flapped and it sounded like it was puttering a bit but would not start. Upon testing the plugs I found only one plug was firing. My...
I have a 1953 Farmall Super M. The brakes on it dont work right. I have the drums off or whatever you want to call them. The disk pads look like they are in good shape on it. Everything else in there looks crudy. The problem is that when you apply the brakes they are very weak and you have to...
My neighbor has one I finally took some pictures of. It actually ran about 2 years ago. It has a bunch of cultivator lying around. Has a 3pt on the rear and a PTO.
Worth doing anything with? Were these good, bad, indifferent?
Thanks,
Rob