farmtrac 300dtc

Yesterday while changing from forward to reverse the lever arm broke off just inside the gearbox. Does anyone know where I could buy a replacement? The part no per the manual is LG2191 or A1290101. Thank you in adavance.

I just bought a used Farmtrac 300DTC. Both left hand side loader cylinders are leaking. Is there a rebuild kit I can buy and repair them myself or do I need to find a hydraulic shop to repair them? If I can repair them myself, Where would I get the rebuild kit and where can I buy the spanner...

Is this considered a regular tractor or a compact tractor?

I have read multiple posts on here from people who have had this issue before, but did not find any clarity. I am trying to fill the hydraulic system (which is also the tranny fluid) on a Landtrac/Farmtrac 300DTC. Its the same tractor as the 360 DTC. There is no dipstick anywhere. No fill hole...

Hello all, I have a Farmtrac 300DTC that was bought as a basket case. The motor has been completely rebuilt and now I am searching for a clutch. I really don't want to spend the $900-$1100 I've been seeing on Farmtrac/tractor parts sites. I have noticed that the pressure plate is stamped...

Is the Farntrac 300DTC the same as a Landtrac 300DTC? Jeremy

I have a Farmtrac 300 DTC that starts when you turn the key, but shuts off when you release the key. Replaced ignition switch, did not solve problem

Looking for the service manual for a Farmtrac 300DTC. Anyone have a good source to down load one?

Anybody have any ideas why my farmtrac 300dtc is having problems with the shuttle drive? It will go into foward pretty easy but cant hardly get it to into reverse. Would low hydralic fluid cause this?

I need a little advice here. I am looking to buy my first tractor and I found a ford 1710 w/FEL and 1300hrs on it and a farmtrac 300dtc with 850hrs on it that fit in my budget and and my precieved tractor needs. The farmtrac with no FEL is less $$$ than the ford. which will be more...

We are thinking about checking out a 2005 Farmtrac 300DTC tractor with loader. Seems to be a decent deal with a trailer. My question is are parts readily available? I've been doing a little research and noticed that alot of people own Farmtrac's and Montana replaced them but should I worry that...

Does anyone by chance found any non oem filter numbers for all of the filters for a 300dtc? Air, fuel, hydraulic, and oil? Thanks

Took delivery of a FarmTrac300DTC with FEL and Tiller several weeks ago. I am 62 years old and feel like a 6 year old at Christmas. I had done months of research on compacts, allot of it on this site. Knowing that Montana tractors are the same I read with interest all feedback on them also...

I am still pondering purchasing a tractor before starting the house. We are in the process of getting all the paperwork ready for a loan. Of course I would wait until all of that went through before getting a tractor, but am stuck on what to purchase. From all the research I have done I can...

I cannot seem to get the PTO to operate properly on my new Farmtrac 300 DTC. I use a 5 foot finish mower with no problem, but when I hook up to a 5 foot rotary cutter it engages like two freight trains colliding, whether in manual or independent mode. It shears the bolt pin on the cutter three...

I am looking at these two tractors. They are essentially the same minus the loader. Are there any other differences I should know about? Bill

See my final post under heading L3130,Farmtrac360DTC,MF and others for rationale if interested. Thank you again for all the insights as I've been glued to this sight for about 3 weeks now. Finnally decided to start posting. See ya under the Kubota area in the future. Thanks to the others that...

I am in the market for a utility machine. Accessories will include FEL w quick change and extra hydraulics, Grapple,Box Blade, Post Hole Auger, Forks, and a detachable Backhoe for the 3pt. My terrain is NOT flat, I have a 1/4 mile of gravel drive to maintain, wooded lot to semi clear/maintain...

I am in the market for a utility machine. Accessories will include FEL w quick change and extra hydraulics, Grapple,Box Blade, Post Hole Auger, Forks, and a detachable Backhoe for the 3pt. My terrain is NOT flat, I have a 1/4 mile of gravel drive to maintain, wooded lot to semi clear/maintain...

I am in the market for a utility machine. Accessories will include FEL w quick change and extra hydraulics, Grapple,Box Blade, Post Hole Auger, Forks, and a detachable Backhoe for the 3pt. My terrain is NOT flat, I have a 1/4 mile of gravel drive to maintain, wooded lot to semi clear/maintain...

Hi We live in Virginia near N.C. We had thought to get a NH tc30 but a friend near us recommended a dealer that sells Farmtrac and Branson. He is asking $18,000 for a 300dtc with a fel and 5' rotary cutter. This price seems a bit higher than I've seen on the board but maybe it's just where...

I was made an offer on a 300DTC with FEL for $15,000.00 Here is a brochure (Front Side) Next POST with be the reverse side. What do you guys think of this price. The company that made offer is Oconee Implement in Westminster, SC a MASSEY FERGUSON DEALER... This is the older gentleman's son...

Wondering if this is a good price, seems to be a nice tractor plus the 0% financing doesn't hurt either. Thanks for any info. Barry

I have just discovered the Montana Brand. I am interested in the Montana 3040 with FEL. Can you tell me if this tractor is the same LG tractor sold by Farmtrac - I believe their model is named 300 DTC. It looks to me that they are the exact same tractor. I have a local Farmtrac dealer in Central...

I have spent the last week researching the FarmTrac 300DTC and 360DTC and have met with a local dealer and gone for a test drive. I am impressed with the overall operation of these little tractors and believe that for my 13 acres that they will fit the bill without breaking the budget. The...