farmtrac 45

I Have a 2002 Farmtrac 45. I have to hold the handle to keep any 3-point attachment up. It was working correctly I think when I bought it, but now it will raise, but if I let go of the handle the handle and the attachment will go down on it on. If I hold the handle it will stay up. Any suggestions

Does anyone have a Farmtrac 45 wiring diagram, i have found a 60 which looks similar but I'm not sure they are the same. Any help would be much appreciated.

I can not find the torque specifications for the Bosch/Mico Fuel Injection pump bolts for my Farmtrac 60. In my Farmtrac service repair manual, it excludes a "torque specifications" page within the "Section C Fuel System." Is there anyone that can post the torque specifications for the: Fuel...

I'm having issues with my 3-point controls. The lift won't start to lift until the last two inches of travel on the lever. Also, if there is an implement on the 3 point such as a mower and hit any bump the handle will fall and the 3-point will lower. It does not want to stay up. The 3 point...

I just finished installation/replacement of the Bosch/mico inline injection pump, and I made a how to video to help those who may need it. The installation video will be up soon too.

I checked the oil level in the Mico PES3A pump on my Farmtrac 45 the other day and it appeared to be low (in relation to the overflow line location). I added oil via the fill plug on the top of the pump but it never ran out of the overflow. I started the Tractor after adding oil to the pump...

Good day all. I have followed the forum for quite a while and found it to be a great source of information. I need to remove the rear wheels from my Farmtrac 45 to do some brake maintenance. The tractor is 100 miles up the road and I'm trying to see if anyone knows the wrench size that is...

Hi guys, I have a 2002 Farmtrac peice of junk 45 and it started running on 2 cylinders the other day. I was unhitching a spreader and it was running fine before and as soon as I throttled up to move away it started missing a puffing white smoke. It tried to run on 3 every now and then, but just...

Good morning everyone. I am new to the site and there seems to be a wealth of information here. I tried doing a search but was unable to find what I needed so I'll just ask. I have a neighbor with a 2005 farmtrac 45. It was running fine when they shut it down and when they went to use it again...

Finally have my first problem with this 2003 Tractor. Starting a week ago, everytime I startup the RPMs max out to Governor top speed. Engine Stop doesn't work. Have to put the tractor in high gear and hold the brake to shut it down. It does this a couple of times, then runs normally for the...

New member from Niceville fl.

Alignment procedure before removal of Injection Pump.

I need a wiring diagram for a Farmtrac 45. Mice chewed up the wiring and caught it on fire. Then my brother removed the old wiring. Any help would be appreciated.

the mposition lever does not work at all. the draft control will lift only at top of qaudrant..it will go all the way and all the way down..and only with in a inch of movement..help please

i am wonting to know where i can get parts for a farmtrac 45 power steering sector

I was wondering if anyone would know who makes the injection pump on a Farmtrac 45. I doubt it's a Bosch. Also if you have any numbers or info off a pump that would help. Thanks Randall

Does anyone know where I can get fuel filters? for 2000 farmtrac 45

does anyone know if there are after-market fuel filters for farmtrac 45? All the dearler around me (Fl.) have closed and getting parts is not an easy task.

Can anyone help us w/ adjusting the injector timing on this tractor? It ran dry on oil and burned up, got it rebuilt and the guy who installed it doesn't know how to adjust it. This is one of the older models.. I'd upload a picture but i can't figure out how just yet.. Thanks, Robby...

Hello all, Could someone help me out with a simple question? Is the rollbar on a Farmtrac 45 ninety degrees or square with the mounting plate? My 45 took a tumble and the rollbar is bent right above the mounting plate. I am needing to have it straightened so that the fenders will line up...

Can someone help me. I have a 2003 Farmtrac 45 that I bought used in January 2006. The draft control seems to be froze or locked up. The draft control lever is almost stripped out around the shaft. Moving the handle seems to only tighten a washer against the hydraulic control lever. Could...

My 2003 Farmtrac 45 has developed a power steering leak underneath the steering column. Fluid is running down side of block. Tractor has 200 hours on it. Could it be a fitting or seal?? Also, I'm not sure where to refill the power steering fluid. Bought the tractor used and didn't get a...

I recently purchased a 2003 Farmtrac 45 with 200 hours on it. It started leaking power steering fluid after the first time I used it. It is leaking under the steering column and running down the side of tractor block. Didn't notice this before I bought it. Could it be a fitting or seal...

One dealer is showing me a Farmtrac 45 which has the EPA tier 1 engine. Another dealer is showing me a 545 which has the EPA tier 2 engine. Any comments on which is the better choice?

Does ANYONE know the answer to this? Which model Ford tractor was the Farm Trac 45 copied after? I'm wondering if the loader brackets from a Ford 3910 will fit the Farm Trac 45... The Ford 3910 is too far away to compare or measure, I need some wisdom here. Thanks, RUSS

I've been told thatthe ford 3910 is the same basic design as the farmtrac 45...Is this so? And if so, will the loader brackets from the 3910 fit the farm trac? How would I find an answer to this? THanks, RUSS