gears

Hi all fist post. I use this site a lot. My father borrowed my cx2510 hydrostatic when I was on vacation and was using the clutch like a stick shift. 😵‍💫 he said he would hear grinding and asked if it was normal. What kind of damage could he have done. Thanks

Hey all. I've got my 1980 MF 30B up and operating again after sitting for 10+ years. Problem now, though, is that I'm suddenly unable to shift into 2nd and 3rd gears. This tractor has 6 speeds (3 on the column, high and low) but for some reason I can only shift between neutral and 1L and 1H...

Today the front end of my ym186D had what i would consider a catastrophic failure. I had it in 4x4 and it made a noise and i think i have something broken in the front end. I parked her and removed the front driveshaft to find that if i try to move the tractor the front axle will turn about...

Kioti px1052 has severe shuttle shift engagement with no one knows how to repair? 500 hours on clock

I have a M7060 with a 12 speed transmission. Gears 7-12 work fine. but the speed in Gears 1,3,5 are all the same at 2.65 MPH and Gears 2,4,6 are all the same at 3.6 MPH. Any Ideas what could be the issue? Fluids are all good..

Hello I'm new here I'm currently working on replacing the seals and bearings on the front axle of a John Deere 6220 SE and I can't find the torque specifications for the ring gear bolts. I've looked through several online resources but haven't been able to find the exact specs. If anyone has...

Hi could anyone help me with gearbox parts for a Mitsubishi MT23. I’m in need of pinion shaft and drive shaft gears. If anyone is breaking either a MT21, MT23 or MT25 please get in touch. Many Thanks

Long story short: I've got a hydraulically operated 15' flexwing mower. Week or two ago, fired things up for spring.... mower is dead as a nail. Ascertained it was inside the speed increaser verses inside the pump itself, so just took apart earlier today. Confirmed, both the gear shaft and...

Bought a used tractor with only 120 hours. However, after about 5 to 10 minutes of running tractor (after it warms up?) it starts grinding when it goes into gear. When this happens, when I push in the clutch it makes a chatter like it's making something spin and will grind if I try to put it in...

I'm looking for front differential Ring and Pinions gears for my tractor, they were damaged, removed before I bought it. The tractor runs great but I sure would like to have 4wd option. It seems the gears aren't available for purchase anymore and I can't find any used places that have any. Any...