hydrostatic

The hydrostatic unit in my Ford 1620 is made by KYB and is model HVFD 23c-23m. The model number was on the tag when I split the tractor to fix a leak. Anyone know the KYB model number that’s in the TC series ( not the Ford part number)?

Looking for information on PTO has a clicking when letting clutch out.dosent stop while operating tractor even with PTO disengaged. Shaft turns until loaded then slips noise sounds like it's from transmission or case it's clicking. Also need to know if the lever above the brake on right side...

I have a DIY snowcat I built ground up with 1 ton differential/brake steer configuration that is somewhat spartan that I'd like to convert to hydrostatic drive. I'm a newb in this compartment, so bear with me. Looking for initial build ideas/concepts before possibly venturing down this path...

Hello Guys Just wondering if anyone us using Sunoco fluids in their Hydraulic Transmissions. Thanks for any info.

Have a toy built 50-in cut that has two hoses coming on the right and the left of the motor is this where I add Hydro fluid

I can't tell you just how much I hate JD engineers. I busted the power steering line at the cylinder on my tractor. There is a flexible hose that goes from the cylinder to the hard hydraulic line that is about 18 inches long. Removing it from the cylinder is easy. Removing it from the hard...

My 5234d tractor has lost ALL hydraulics. The engine is running and the drive shaft is spinning. But no steering, no moving forward or reverse, and no front bucket or 3 point movement. However the pto will engage and spin. Any help would be appreciated?

Can anyone tell me how many GPM a Sauer / Sundstrand hydrostatic drive series 15 pump is? It's a 15-2294 CW

Was using tractor and both hi/lo switches stopped working , noticed when i push them rpm gauge jumps around and battery light comes on . Any suggestions

Howdy. I have a Massey GC2400 (740 hrs) and the other day when I pulled it out of the barn it started clicking and then started locking up the drivetrain. It would sometimes go 2 or 3 feet in either direction and sometime 5 to 10 feet before it would completely stop. It has a mechanical...