international harvester 300

Going to be restoring one of these, although it might be a 350 not a 300, I've got to research that a little bit. Tractor is completely missing the hydraulic cylinder for the fasthitch, but it appears that everything else is there. I need to find out the bore, stroke, and rod size so I can...

Well, I have been trying for the last day and a half to get this steering dial in an maybe I am just over thinking it or overlooking something simple....hopefully, someone can help out that is familiar with the manual steering on these tractors. Those that are familiar, there is a mechanical...

I just purchased this tractor and an Operator's Manual. For the transmission it says to use one quart IH Torque Amplifier Transmission Lubricant Additive to each of four gallons of SAE 10 or SAE 10W engine oil. Where do I get IH Torque Amplifier Transmission Lubricant Additive or is there an...

I have just got done painting my international 300 utility tractor and replaced the engine gaskets with a complete engine gasket set. Reassembled everything and went to start it and it will not fire. I have installed a new battery, new coil, new points, new cap on distributor, all new wiring...

I am looking for a used radiator for this tractor. Where can one find one? thanks for the help

I have a old international 300 I think it's a 1956, I had it changed over to 12 volt two years ago, it keeps grinding the teeth off the starter drive. Do they have a 12 volt replacement starter for the old 8 volt, and where can I find one? Or do I have to take this one down get it rebuilt for 12...

Hi, I'm fairly new here but I see the enormous amount of knowledge out here! So I thought I'd see if I could get any advice on possibly buying an old loader/backhoe. I already posted in the MF forum regarding one I saw for sale for $3,000. It's operational but with some issues. Now I am...

I need a wiring diagram for an international 300 utility. Does anybody no where i can find one at?

New Years Day was cold and sunny with hard frozen ground...perfect for spreading manure. I've been tinkering with the 300U for a while and it was wanting something to do. I'm used to a hydrostat, power steering and half the size, but nothing broke and nobody got hurt, so I'll call it a good day.