john deere 2755

I have a JD 2755 Cab Tractor that I bought new in 1987. I am a weekend guy, and tractor has less than 1500-1800 hours. About 1-2 years ago, the tachometer quit working. Obviously, hour meter quit, too --- other gauges and lights outside the "circle" work fine. I want to get the tach and hour...

hello..im looking to buy a 1990 jd2755 ..1800 hrs.. never had a loader on it... i will just use it to pull a vermeer 5410 reble baler. and a 9 foot new holland 488 mo/co. tractor looks good..low hrs.. clean... he wants 22k for it.. do these older style cabs keep u cool in the hot ? and warm in...

I am looking a buying a John Deere 2755, 4x4, with 4600 hrs. new tires in the rear and 80% on the front. Does anyone know of any problems or anything I should watch out for. Thanks

i have a jd 2755 with 2000 psi to the pressure control valve no pressure out to the remotes took the top plate off of the trans case no pressure comming out of the hyd cylinder port to the lift arms i took the valve apart can't see anything wrong with it any advice on what to check next

Cab tractor ('87) pulling bushhog getting too close to hot in 105 degree Texas. Will pull under tree if heat gauge gets close to red and idle til it goes down. New coolant, oil & filters (air). Clean grill, condenser & radiator. Fan belt ok. New thermostat put in last summer. Running in 2nd...

looking to buy a 4x4 tractor . putting loader on it. any problems with them. things to look for ? 60-75hp 4x4

What are your opinions on these tractors? Is this series generally well thought of? Are they mostly mechanical or are there lots of electronic gadgets? Im wanting a 4x4 in the 80 -100 HP range. Would this be a good one to look at? thanks. Any advice / information is welcome

I have a JD 2755 hi/lo trans, after it gets up to operating temp with the pto on and the hi/lo selector in hi the trans oil light comes on, only at an idle. If you bring the engine speed up it goes off, or if you kick the hi/lo into lo. However it does not always go off when you turn the pto...

i am just wondering if anyone has this tractor and the problem they have had with it becasue my tractor has had leaking axels and nonstop ingine leaks and i keep it well maintained

I recently bought a JD 2755 at an auction. The 3point lift works good going up but will not come down with out me pushing down. It has a return control valve on it, with it all the way open it goes down better but still needs weight. Also when lift gets out of the all the way up position the...