john deere 320

I also posted this on another forum. Posing here since you guys have been very helpful with problems I've encountered. I have a '93 JD 320 with a BDU-21 hydrostatic transmission that was having an odd issue. It seemed to have plenty of pulling power, but going down hills was a bit of a...

Hey guys, I've got a 320 (old 90's machine, not an X320) I'm working on for a friend of the family. What is supposed to hold the fuel tank down on this machine? It sits flat on the frame on one side and the post on the other side sits in a bracket, but I don't see any brackets or straps to...

Saw this 320 package for sale ...blower, blade, mower, cab, wheel weights, chains .. 1400 hrs, top end service at 900 hrs ... is $1200 a fair price?

I've already searched the forum and read a few threads, some were never even resolved (or the OP didn't return to share what went wrong) So I'm starting my own with intentions of documenting all results for future reference. Yesterday my mower blades just stopped turning on when I flip the PTO...

john deere 320 antifreeze looks milky none in oil or muffler not losing any level full but after mowing a while will stall and lose power sometimes shut off new tune up kawasaki fd590v 18hp could it be ahead gasket

This is my first time posting: I have a 1993 John Deere 320 with a 48 inch mower deck. I recently purchased a scrap 1989 285 with a 50 inch mower deck. I tried to install the 50 inch mower deck on the 320; all the mounting hardware worked but it appears that I need a longer belt as the drive...

So my 1994 JD320 ran like a tank all winter and over the past few years. This spring when I opened the shed up i noticed fluid underneath the machine. I was removing the plow and checking out for fluid leaks around hoses etc I could not find anything. It is dry everywhere but when I open...

Hi guys, I'm new to the forums from Montreal Canada. Trying to fire up a 320 that's been sitting idle for 3 years. The tractor worked fine to the day we stored her 3 years ago. I've got strong spark but no fuel. I've never worked on a tractor myself before but it seems obvious to me that...

Put a brand new battery in and tractor started on first try. However after turning off and trying again there is no power no lights or even dash. Help?

I just picked up a John Deere 320 that I found on Craigslist that I could not pass up. It has 700 hrs on it, needs some minor work. I have a few questions based on issues it's giving me. 1- the battery charging light will not go off. I just charged the battery and cleaned all the connections...

jd 320 skid wont start i have replaced in line fuel filter and got fuel to the water separator /bleeder try to start ,no fire and then i can't get the hand pump to work and no fuel will come out of bleeder.

Hello hello! New guy here! I'm going absolutely craaaazy trying to fix this simple little problem! Here is the details... I have an early 90's model john deere 320 lawn tractor...i took the bagging assembly off about 2 seasons ago and now i'd like to reattach it, but the problem is...i have...

Have inherited a john deere 320 had a new pto clutch put in, basically serviced. But now 2 months the thing has died and won't start. Turn key nothing just the red ignition light comes on. Have taken the battery out to be tested and it tested fine. Has got to be somthing simple but need to get...

I bought a jd 320 mower that had hyd deck lift then bought a used hyd snow blade from older jd unit. i have add a loader vavle to operate the plow and we run the hydrostat hoses up to a filter then the loader vavle and on back to the deck control. The first time we started the mower we blow the...

I am looking for wheel weights and chains for this mower, any help me find where to purchase these items?

So I replaced the gasket rocker on the left cylinder on my JD320 with the Kawasaki engine. I am concerned with the amount of gunk but will see if if anyone has any advice. The engine runs strong and with the new spark plugs runs even better. Here are some pictures. Was fairly easy to do...

Help everyone. I am afraid I might be the victim of the plastic cam issue but here is what is going on. 1. Plowed the Drive this AM ...no isssues 2. Came home from work and tried to fire up the machine and when turning it over there is a rapid clicking noise coming from the starter. 3. Tap...

After many hours of pondering how to create a cutting edge for my blade or to create skids that will allow for little to no damage of my drive way I have decided on a rubber edge solution. Looking back at my contacts and referencing some airport snow blade solutions from a friend of mine at...

I was just doing a full oil change on my 94 JD 320 and noticed that the coolant reservoir was empty. When I opened the radiator cap I could not tell if this was empty or not. How can I flush this system aka what tools and process should I follow and second could there be something else wrong?

I am looking to buying a JD 320 18hp Kawasaki,48in deck and snowblower attachment. It has 500 hours on it and the previous owner was very **** about taking care of it so it is in excellent condition. He said the only problem is it cuts about 1/8 uneven which is fine by me because it is for the...