john deere 3203

Obviously, this adapter fitting is severely damaged and must be removed. The nut between the threading is corroded so badly that it will not accept a wrench, and it appears to be seriously corroded into to threading of the spool valve. Does anyone have a suggestion on how I can turn that adapter...

Hi All, Considering going to look at a low hour used John Deere 3203, but I'm concerned about it's low loader lift capacities (John Deere 300). They seem to be much lower than most tractors of this size, although the max lift height is very high by comparison, so that may explain it. I intend...

I'm looking for the wiring diagram for the John Deere 3203 or similar model. My specific problem is no power to the starter relay. Tommy

I have a JD 3203 Compact and was wondering why my steering was drifting after cutting grass. Noticed hydraulic fluid was spewing from the Power Steering Cylinder "Rod Guide" seal. Looks like a stick or something may have stabbed/got jammed between rod and rod guide and damaged the seal. Noticed...

My tractor won't start, and I believe I've eliminated everything except a problem with the starter itself. I removed the 2(?) bolts holding it in place, and it doesn't want to budge. Do I get rough with it, or is something else holding it in place. It's in a pretty tight spot, and I may be...

I just bought a JD 3203 and I am in search of a used loader or reasonably priced new loader for it. So far all I can find is a new John Deere loader at $4800 and mid Feb 2018 delivery. Any insight on where to find a better deal? Ken Sweet

While brush hogging yesterday after 3 hours of running fine it started to die out then rev up . 911 hours on tractor and this is the first time its done this. I stopped cutting and while heading back down gravel road it just shut off , took a few cranks to start it back....WTH ...completely...

I have a 2006 John Deere 3203 that has been relatively free of issues but within the last week after being used the tractor sat for a few days and then would not start. Since it was the original battery I replaced it and found no difference. After looking I noticed the ignition fuse was blown so...

I am having an issue with the down pressure on the FEL. I can put the bucket down flat on the ground. Then use the tilt and it will pick up/pull up the main boom arms. When i tilt back (IE make the buclet flat to the ground the whole boom arms go back down. I literately can go and pick up the...

2007 model 3203 started it up and in 5 min. gauge on red , radiator feels cold and it is full . Does this indicate a bad water pump or could it be a valve stuck ? 885 hours and so far over 3,000 in repairs . Bought it used with 500 hours , not a happy camper

Looking for someone who has specific knowledge about tapping in to a JD3203 hydraulics system to add another function like a hydraulic top link... JD does not have a power beyond kit for this model. Thanks. Charlie

Need to purchase something in 30+ HP range, with FEL & 4wd, Hydrostatic. Hours on both machines are low for age (below 300). Please let me know your thoughts and experiences on either (or both) of these. Thanks for your help.

I was wondering if anyone else has had an issue like this with their 3000 series JD? My tractor will be 9 years old next month and has 480 Hr. Okay, so here is how it went. It is long so if you don't want to read it I am cool. I am pulling the land pride 60" grader with all 4 Scarifiers deep...

Where is thte Hydrolic Filter Location

John Deere 3203 clicking when attempting to start with good battery. Does this model have starter solenoid? What else would cause a clicking sound? Appreciate any feedback.

My fan belt pulley has broken on my JD 3203. In order to replace, I need to remove the fan. Does anyone know if there is a way to remove the fan without removing the radiator? Thanks.

I got a brief look at a John Deere 3203 tractor today and I was wondering what the pros and cons of those machines are? The machine in question is a 2006 vintage, about 530 hours, 300-series loader and 72" bucket, no other bells and whistles. The owner wants $12,000 for it as-is. Starts and...

I have a JD 3203 Compact Utility Tractor. The front loader works fine, no limitation on lifting. When nothing is on the rear 3 pt lift it goes up and down fairly good, but maybe not the full height. When I attach my mower or an attachment to the rear (I have an iMatch Quick Attach) it only goes...

New to the forum. My 3203 JD has 250 hours on it and I have an intermittent problem. The three point hitch raises very slowly from time to time. Lowering is no problem. Front end loader works fine all the time. Fluid is full and inline filter is clean. Any ideas? Thanks....

So im a bumbling idiot sometimes. While clearing an area of brush, i got my BB hung up on a stump on the back corner and bent a draft link lift arm. While trying to bend it back, i snapped it. Now ive gotta either buy a new JD one or find some aftermarket ones online. Any recommendations? The...

delete

Newbie here looking for advice from the pros... This weekend, the battery on my JD 3203 died. The manual suggests two ways to remove the battery --- lifting it out vertically or removing the front grille. I tried removing the front grille, but encountered some difficulty. There are 5 bolts...

I have an opportunity to buy a JD 3203 with a model 300 loader. +- 300 hrs on it for $11,500. It has been garage kept and very well maintained. Does this sound like a good deal? Are there any issues with this particular model that I should be cautious about. Thanks, Steve

Hello, need help on getting the cover off around the trottle lever to tighten it so it does not slip and hold in gear...We have taken it in to john deere 2 years in a row to have it serviced and particulally for this to be fixed and I only have a small horse farm where I move manure out to...

I just picked up a new 3203 (my fist tractor!) and while brush hogging yesterday, it died multiple times. After I cleaned off the screen and it cooled down(?) it started back up. Today same thing, but after it died the second time it would not start. The glow plug light doesn't go off? Any...

My dad bought a 3203 at an auction this summer and wants to add rear services. JD doesn't offer them in this model. Has anyone put the electric diverter valves in that would allow him to use the loader hydraulics? any links and tips would be great.

I have found a JD 3203w/300 loader for $12,500 beautiful machine. I googled some reviews and they were terrible so I am hoping for some feed back on the model and price.

Hey folks, What is a fair price for a 2005 year 3203 with 300 loader and balast box? Tractor is very nice condition and 65 hours? Thanks

I'm looking at a small 30hp tractor with front end load, box blad and brush hog. I am going with 4wd and have did comparisons and read different reviews. Now it is time to ask for opinions of guys that actually use the tractors and not those trying to sell them. Please chime in and give me...

Newbie here looking to buy! JD and Kubota are my local dealers. Trying to decide btwn which model. Was leaning torwards the L2800 until I saw and drove the 3203. L2800 is less expensive and has smaller loader but the layout seems nicer and the dealer is really close. Useage: front end...